Centrifugal Pumps Dealers in Rajkot (146 products available)

• Application: Paper Pulp Supply
• Voltage: 220V, 380V, 440V
• Finishing: Coated, Polished
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Medium Pressure
• Warrenty: 1Year, 2Years
• Motor Phase: Double Phase, Single Phase

• Type: Centrifugal Monoblock Pump
• Model: LDM-11
• H.P.: 1
• Pipe Size: 50x50 Cm
• RPM: 2880
• Head in Feet: 45
• Phase: 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.Motor indection air filled. C.I.Cast Grade Motor Body EN-8 Grade Motor Shaft Pump Rigid cast iron impellor & volute casing provide good efficiency & long life. Compatible with low friction flexible hose pipes. Application Sprinkler & drip irrigation Pumping from sump for high rise building & industries River & canal lift irrigation Residential irrigation Plus point An ISI mark products. 30% lower power consumption. Excellent performance even at low voltage. High efficiency & low electricity cost. Easy availability of spare parts. Noiseless, easy to install, compact, requires minimum space.

• RPM: 1500
• Size: 100x100 mm

We are offering centrifugal water pump. Our centrifugal pumps are generally used in agriculture, aquaculture, farm houses, and irrigation etc, to get water from dam site, ponds, canals, bore wells etc. Our range of centrifugal water pump is known as double bearing oil seal type. Our pumps can be coupled directly with petter or high speed diesel engines. Further our centrifugal water pump also comes with “v” belt pulley that can be driven with v belt, tractor.

• Brand Name: TRISHUL
• Power: 415
• Model Number: TCEM750
• Application: AGRICULTURE & AQUACULTURE
• Fuel: ELECTRIC
• Application: WATER
• BLACK ,BLUE: 30000

Centrifugal monoblock pump set 5.00 hp , 7.50 hp,10.00 hp size 65x50 ,80x65 ,80x80 ,x100x100 , 150 x 150 three phase -415 volte high efi motor.

Grinder Pumps shred solids and raise sewage to a higher elevation through pressure sewers. They shred sewage discharge into a finely ground slurry that can be sent through a small-diameter pressure pipe. Grinder pumps are connected to septic pipes and transport waste from households and businesses to sewage treatment systems. Unlike a well pump, grinder pumps are fitted with special cutting ring systems that are mounted to the pumps motor shaft.Grinder pumps are often installed on municipal sewage holding tanks. Wastewater from households or buildings collects in a holding tank and when the water reaches a certain level, a sewage grinder pump turns on to grind the waste and force the wastewater through the pressure pipe on to the sewage system. This sewage pump ensures that solids are processed as they leave the storage tank and helps to keep septic pipes clear of debris. Grinder pumps that are part of a residential septic system typically run off of household electricity and also come with an alarm system to let homeowners know if something is wrong with the pump. Residential or municipal grinder pumps are not typically designed to be used as a sump pump, since certain chemicals or materials may damage the liquid pump or cause operating problems.

 Basic Specifications >> The pump is design such a way that it couples directly to driven unit. Pump having rigid - construction, antivibration design and easy to assemble. Impeller is closed type and single end suction, made up of special Grey cast iron material. Impeller is dynamically balanced. Casing is having well design volute way ensuring smooth flow with gradual changes in velocity. Casting is made up of close grain & high quality cast iron, and hydraulically tested. Quality steel material is used for shaft, its dimensional accuracy controlled in such way that shaft can transmit maximum power without vibration. Supporting frame is rigidly constructed and ensure that smooth functioning of shaft; ball bearings etc. Frame provide easy access to stuffing box as well as gland packing.

We are a reliable name offering performance oriented and quality assured Centrifugal Pump. The Pump we present are designed as per the international quality standards. The production starts under the administration of veteran professionals having huge knowledge and experience. Working with a pool of diligent workers; with their utter dedication and commitment, we deliver the Centrifugal Pump in stipulated time span.

• Type: Monoblock Pumps, Centrifugal Monoblock Pumps
• Certification: ISO 9001:2008, IS : 9079
• Application: Water Supply, AGRICULTURE
• Weight: 45-50kg
• Voltage: 220V
• Theory: Centrifugal Pump
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric
• Pressure: 20-25Bar
• Warranty: No Warranty
• Pump RPM: 2800
• Brand Name: YASH
• Country of Origin: India

We have carved a niche in the industry as the premium Manufacturer, Exporter & Supplier of Centrifugal Pump based in Gujarat, India. Our Centrifugal Pump has garnered acclaim across the world for its efficient performance, compact design and requirement of less maintenance. We check the Centrifugal Pump on stringent quality parameters to ensure customers obtain a trustworthy product. We are offering Centrifugal Pump at heavily competitive rates.

• Motor Phase: Single Phase
• Power Source: Electric
• Country of Origin: Made in India
• Brand: Lomans
• Material of Construction: Cast Iron
• Surface Finish: Galvanized

• Certification: CE
• Weight: 40-50kg
• Driven Type: Electric
• Warranty: 1year
• Application: Agriculture

Kirit & company is an isi 6595 part-1 certified world class pumps manufacturer in india. The objective has always been on creating value by offering customized and cost effective range of products for the desired pumping requirements. with decades of experience and expertise, our range covers varities of centrifugal pumps. We also manufacturer special purpose pumps and pumps spare parts like, body, propeller, seals, glands, etc. The innovative range of pumps caters to numerous critical applications in the industry. Kirit & company has always been a suitable partner for providing solution engineering, lifelong performance and service support for the industry’s pumping needs. Industry majors’ preferred choice and world’s renowned consultants' approvals stand testimony to the fact that our pumps are widely accepted for quality and provide value for money. understanding the application and the customer's needs has been at the core of all the activities at kirit & company. We, at kirit & company, understand your specific needs better than anyone else. Every product supplied by kirit & company is selected by thoroughly studying the liquid being pumped, the pumping system characteristics and the surrounding conditions that may affect the optimal performance of the pump. our expertise in mechanical and hydraulic design, in addition to one of the widest arrays of material options in the pump industry, help you select the right pump thus enabling the transfer of the water from the desired point to the required point in the most efficient and cost effective manner. the highest level of quality assurance procedures are followed in making every pump which ensures that there are no deviations from the customer’s expectations and that the products perform their desired duty with a high level of reliability and durability.

• Power Source: Diesel
• Head: 14 m
• Material of Construction: Cast Iron
• Speed: 1450 rpm
• Size: 150 x 125 mm - 151 x 126 mm
• Head Range: 11 to 16 meters

• Features: No need for electricity, Reliable operation, Easy for installation
• Design: Horizontal Centrifugal, Back-Pull-Out type pump fitted with single stage closed Impeller in foot mounted Volute Casing having axial end suction and Vertical centerline delivery
• Applications: To handle Hydrocarbons,Volatile Liquids,Thermal Fluids & Corrosives in Chemical/Petrochemical/Fertilizer/Sugar/Paper and other processed industries.
• Sealing arrangement: Mechanical seal / Gland packing
• Operating temperature: Up to 300 degree C
• Operating duty: S1
• M.O.C: Grey cast iron, bronze, stainless steel SS 316/304, Cast steel, alloy 20, Ni-hard cast iron
• Custom built design: Pumps with different operating speed and Temperature can be offered on request

• GREEN: YELLOW

We are engaged in manufacturing and supplying a wide range of belt driven centrifugal pumps, couple centrifugal pump & direct coupled centrifugal pumps. All these products are singles stage type pumps that have radial flow and are available with suction type with horizontal shaft and vertically split casings. Come with common base plate, our pumps are also equipped with pulleys or with flexible couplings that are driven by electric motors or diesel engines. Salient features : › high efficiency over different operating conditions. › easy to install. › simple, economical and adaptable to different climatic conditions.

We are Offering Centrifugal Water Pump. Specifications: Engine : 5 to 10 H.P.Size : 3" X 3" to 6" X 6"

We are world class manufacturer of a distinguished range of Direct Couple Centrifugal Pumps. Our direct couple centrifugal pumps can be rated as the highest quality products because of their incomparable performance and fault resistance property. In addition to this, our Direct Couple Centrifugal Pumps provide the additional advantage of being very reasonably priced.

• Fuel: Diesel
• Application: Water
• Application: Irrigation
• Pressure: High Pressure
• Theory: Centrifugal Pump
• Lead Time: 21 days
• Port: Mundra Port
• Packaging Details: Export worthy wooden-box
• Standard or Nonstandard: Standard
• Supply Ability: 500 Set/Sets per Month
• Place of Origin: Gujarat, India
• Material: Cast Steel
• Feature: High Head

Centrifugal pumps are available as per following sizes: 2.5" x 2.5 " 3" x 3" 4" x 4" 3" x 2.5" (high head).

Features All Pumps Centrifugal Radial Flow Single stage Delivery & Suction Sizes commensurate with Discharge All Pumps in Cast Iron Volute Casing All Squirrel Cage Induction Motors Forced Air Cooled Direct Plug-In into 200V, 50 Hz, 1Ø AC Power Direct Plug-In into 400V, 50 Hz, 3Ø AC Power Motor Power Range from 0.50 HP through 5.00 HP

• Water Supply: Water Transfer

We are offering centrifugal pump. side delivery spilt casing centrifugal water pump, belt driven "c' section. required 40 hp to run pump heavy duty, long life.

Capacity up to 1890 LPMSize 12 mm to 100 mmPumps whichWe deliver has Superior quality Value for money Trouble free performance Innovative design Product customization Higher efficiency Rapid delivery of both custom & standard pumps Responsibility of product performance service Applications : Milk, Cream, Butter Milk Condensed Milk Fruit juice, Beer, Wine, Sugar Syrup Vitamin Solutions, Sugar & Confectionery. Acids, Fine Chemicals R O Water, DM water, Pure Water. Vegetable Oil, Mineral Oil, Lub Oil etc. Pharmaceutical Formulations, Syrup etc. Alkaline Solutions / Alcoholic Drinks Bottling Plants, Soft Drinks & Distillery Food Processing / Liquid Food Stuffs Water Treatment Plats Colour dyes and Pigments / Paints Descaling Applications, Paper & Cement Industries Detergent, Soaps, Paste & Shampoo Textile Sizing, Dyeing & Finishing Systems Natural Cellulose Fiber / Synthetic Fiber System Hot & Cold Water Pumping.  Features : As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material. Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less crevice corrosion. Super finish surface also ensure no ingress or emission of germs or impurities Pumps are highly energy efficient and requires less NPSH to function without cavitation Pump can handle liquids having viscosities up to 1500 centipoise The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators. Pumps are available with closed/semiopen impellers. The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals. Minimum working / rotating parts Safe and quite operation levels. Gentle product handling with lower maintenance and downline cost. Dynamically combinations of seal faces as per customer's requirement (single seal / double seal, seal external cooling) Suitable for standard motor or flange type or foot cam flange type motor or engine Monobloc or bare pumps or with trolley Also with flame proof motors Various types of connection like - tri'clove joints SMS, Flanges or threaded nipple/coupling Pumps with adjustable legs, available in request  

We are offering sanitary centrifugal pumps. Centrifugal pumps are a popular choice for low viscosity (thin) liquids that need to be pumped at high flow rates. Centrifugal pumps are often used in many industrial, municipal and commercial applications and are usually quick to install and easy to repair.

Couple Type Centrifugal Pump

we are manufacturer and exporter of Centrifugal Pump

WE ARE ONE OF THE LEADING MFG. AND EXPORTER OF ALL TYPES OF CENTRIFUGAL WATER PUMPS FROM SIZE 2" TO 12"