Double Ended Load Cell Dealers (30 products available)

Available as single or double ended shear beam (the latter being more common in weigh­bridges), this type of load cell can offer slightly lower profile and less sensitivity to side-loads, but often with poorer sealing (potted) and corrosion resistance (alloy steel). These load cells are more advantageous in silo vessel weighing where rigid connections and head-room constraints are an issue as compared to a vehicle weigh­bridge where sealing and protection are very important.

Double ended shear beam type of load cell can be found.

• Material: Alloy Steel
• Certification: ISO Certified
• Application: Industrial Use
• Power Source: Elecrtric
• Output: 1mv, 2mv
• Rated Load: 100kg, 150kg
• Temperature: 20-25deg C
• Automation Grade: Semi Automatic

Key Features : Pre-Calibrated technology (Collaboration with European technology) No Need to Make Calibration (Just Plug & Weighing) Strong Digital Signal provide accurate weighing Profitability to Highest Weighing Accuracy Nickel Plated Tool Alloys Steel True Hermetically Sealing Inbuilt Lightning Protection - Electronic Gas Discharge Tubes Inbuilt Temp. Protection & Surge Protection No Corner Error No Analogue to Digital Converter Predictive diagnostics simplify troubleshooting Two Years Warranty in Eagle Make Load Cells Technical Parameters : Rated Load (E-Max) - 20, 30, 34.5, 40, 50, 60 t Rated Output (mV/V) - 2.00 ± 0.01 Non-linearity - ±0.02% F.S Hysteresis - ±0.02% F.S Repeatability - ± 0.01% to ± 0.02% F.S Creep (30 minutes) - ± 0.02% F.S Zero Balance - ± 1.00% F.S Temperature Effect on Zero - ±0.02% F.S Temperature Effect on Output - ±0.02% F.S Protection Class (IP) - IP68 Communication BPS - 9600/19200 Communication Mode - RS 485 Insulation Resistance (O) - 3000M Excitation Voltage - 7 to 15V DC Compensated Temperature Range - (-10oC to +50oC) Operation Temperature Range - (-20oC to +60oC) Safe Overload - 150% F.S Ultimate Safe Overload - 200% OF R.C Cable - F4 x 16m

• Type: Load Cell
• Material: Alloy Steel
• Certification: ISO Certified
• Application: Industrial Use
• Temperature: 55-60deg C
• Country of Origin: India

• Brand Name: Flintec
• Type: Double Ended Shear Beam
• Material: Stainless Steel
• Application: Automobiles Test Facilities
• Model: SB8
• Capacity: 10 Kg- 500 Kg
• Ingress Protection: IP68
• Features: Hermetically sealed, Current Calibrated, High Accuracy & Precision
• Load Cell Certifications: OIML, NTEP
• Output Sensitivity(FS): 2.0 +/- 0.1 mV/V
• Combined Error: < +/- 0.0200
• Creep Error (30 minutes): < +/- 0.0166
• Accuracy Class: OIML R60 C3
• Temperature Effect on Zero: < +/- 0.0140
• Temperature Effect on Output: < +/- 0.0100
• Zero balance: +/- 5% FS
• Maximum Safe Overload: 200% FS
• Ultimate Safe Overload: 300% FS
• Recommended Excitation Voltage: 5 to 15V DC
• Maximum Excitation Voltage: 15V DC
• Input Resistance: 380 +/- 10 Ohm
• Output Resistance: 350 +/- 3 Ohm
• Insulation resistance at 50V DC: >= 1000 M Ohm
• Compensated Temperature Range: -10 to +40 Deg C
• Operating Temperatue Range: -35 to +65 Deg C
• Load Cell Intervals (nLC)/Divisions: 3000
• Cable Length: 3 Meter

• Type: Double Ended Load Cell
• Material: Alloy Steel
• Color: Available in Many Colors
• Application: Industrial Use
• Power Source: Elecrtric
• Output: 2mv

We conduct diverse quality tests in order to ensure that our entire range is free from defects. Our company is ranked among responsive and responsible Suppliers of Ball Type Double Ended Shear Beam Load cell, engaged in catering to buyers across varied markets. Our double-ended shear beam load sells are suitable for truck scales, railway scales, blending scales, etc.

Weigh Bridge. Truck, Track and Hopper Weighing. Tensil Testing.          

With the help of our experienced engineers, we have been able to design and develop Double Ended Shear Beam Load Cells. The offered load cells are constructed with nickel plated alloy steel in conformation with the industry standards. Our products are widely used in areas where shock, ruggedness and over loading situations exist. Customers can avail these products from us at market-leading prices within the stipulated time-period.

Weitex loadcells are ideal for all industrial weighing applications. Due to their utmost reliability, compact and robust, hermetically sealed construction, they are widely installed in weighbridges, hoppers, bunkers, tanks and cranes. Unique Mounting Mechanism.Better Accuracy and repeatability.Sealed to IP68 Standards.Easy access for installation and maintenance.

• Material: Alloy Steel
• Brands: ADI, ASI, Keli, Sensotronics, Zemic
• Model No.: 6610, 70310
• Capacity: Upto 10 Tons

• Model: 70310

70310 is double ended shear beam load cell. This suits to truck,track,tank and hopper weighing. This cell is designed to withstand rigorous shock loads privailing in heavy duty weighments.

Double Ended Shear Beam loadcells are designed for central mounting and loading on either side. This type of configuration ensures that the output of the loadcell is not affected by lateral loads. It is very rugged and is IP 68 protected. It is widely used for lorry weigh bridges (truck scales) and for silo weighing applications and where there is movement inside or outside the vessel like batching cars etc.

Model 70310 – Double ended shear beam Load Cell is ideally Suited for truck, Track, Tank and hopper weighing applications. From it’s nickel exterior protection to it’s triple-seal gage area, this cell is designed to withstand the rigorous of harsh environmental conditions. The cell is compatible with the “Unlink” suspension system and is a direct replacement for the 65058. FEATURES:    5Tfto 100Tf Capacities Triples Sealing Electroless Nickel Plated   APPLICATINS:    Truck, Tank and Hopper Weighing Tensile Testing Weighbridge Standard Capacities (Tf.) - 5, 10, 15, 20, 30, 40, 50, 75, 100 Excitation Voltage - 10 VDC – Maximum 15 VDC Nominal Output - 3.0 mV/V Non – Linearity - < +/- 0.025 % FSO (Full Scale Output) Hysteresis - < +/- 0.02 % FSO Non- Repeatability - < +/- 0.01 % FSO Creep (30 Minutes) - < +/- 0.03 % FSO Zero Balance - +/- 1.0 % FSO Input Resistance - 770 +/- 20.0 Ohms Output Resistance - 700 +/- 7.0 Ohms Insulation Resistance - > 1000 Mega Ohms at 50 VDC Safe Overload - 150 % of Rated Capacity Ultimate Overload - 300 % of Rated Capacity Allowable Side Load - 50% of Rated Capacity Side Load Discrimination - 500:1 Temperature - 0-60° C Compensated Range - < 0.0015% FSO/ °C Temperature Effect on Zero - < 0.0020% FSO/ °C Deflection -

• Brand Name: Zemic
• Type: Double Ended Shear Beam
• Material: Stainless Steel
• Application: Tank & Vessel Weighing
• Model: B9C
• Capacity: 10 Ton
• Ingress Protection: IP67
• Features: Hermetically sealed, High Accuracy & Precision
• Load Cell Certifications: NTEP, ATEX
• Output Sensitivity(FS): 3.0 +/- 0.003 mV/V
• Combined Error: <= +/- 0.035
• Creep Error (30 minutes): <= +/- 0.016
• Accuracy Class: OIML R60 C3
• Temperature Effect on Zero: <= +/- 0.016
• Temperature Effect on Output: <= +/- 0.011
• Zero balance: +/- 1% FS
• Maximum Safe Overload: 150% FS
• Ultimate Safe Overload: 300% FS
• Recommended Excitation Voltage: 5 to 12V DC
• Maximum Excitation Voltage: 18V DC
• Input Resistance: 700 +/- 7 Ohm
• Output Resistance: 703 +/- 4 Ohm
• Insulation resistance at 50V DC: >= 5000 M Ohm
• Compensated Temperature Range: -10 to +40 Deg C
• Operating Temperatue Range: -35 to +65 Deg C
• Load Cell Intervals (nLC)/Divisions: 3000
• Cable Length: 9 Meter  

The Double Ended Shear Beam load cell, is readily capable for tough environments associated with Truck scales. Its construction of high alloy tool steel provides optimum protection under impact loading and adverse conditions. The cell is environmentally protected with waterproof seal and is electro-less nickel-plated to assure resistance against corrosion.We offer high quality Double Ended Shear Beam Load cell is readily capable for tough environments associated with truck scales. Its construction is of high alloy tool steel provides optimum protection under impact loading and adverse conditions.

we offer double ended shear beam load cell. model information : double ended shear beam load cell, shear beam load cell, load cell manufacturer india double ended shear beam load cell features: o 10 tf to 100 tf capacity o low profile design o electroless nickel plated high alloy tool steel construction o complete environmental protection o weigh module-available optionally for call mounting

Double Ended Shear Beam ( With Cup-Ball Mechanism)   Double Ended Shear Beam ( With Cup-Ball Mechanism)Features:- 10 TF TO 40 TF capacity.  Complete environmental protection-IP68 class.  Standard output 2.0 mV/V Available.  Hardened Tool Steel Construction.  Good side force and shock resistance.  Laser welded available optionally.

double ended load cell Double Ended Shear Beam Load cell unique bridge structure load cell with cup and steel ball mounting. Self-resetting and centering. Widely used in truck scales, railroad scales, hopper scales and various other special scales.

• Type: Double Ended Share Beam Load cell
• Brand Name: Verious
• Material: Alloy steel
• Application: Weighbridge, weighiment, tank weighing etc
• Application: industrial
• Item: load cell
• Place of Origin: Ahmedabad

Double Ended Shear Load Cell We hold expertise in offering a wide range of Double Ended Shear Beam Load Cell. Features: In-built Lightning Protection Low Profile design Low Deflection & Creep Excellent Overload Capability Standardized output for terminal Multi-Transducer Application Optional : Explosion Proof Version Suitable for Optional Group I,IIA,IIB,IIC & meets Temperature Class T4

double ended shear beam load cell, crane load cell, rf load cells

double ended shear beam load cell, steel double ended shear beam load cell

Double Ended Load Cell, Sensors, UV Visible Scanning Spectrophotometer

double ended shear beam, Load Cells, Gold Scale, industrial scale

double ended shear beam, Mechanical Weighbridge Indicator Display

double ended shear beam load cell, Pressure Transducer, load cell cable

Double Ended Shear Load Cell, Compression Load Cell, load indicator

double ended shear beam load cell, Weighbridge SMS Softwares