Flow Sensors Dealers (184 products available)

  • S 401 Thermal Mass Flow Sensor

    S 401 Thermal Mass Flow Sensor

    Get Price Quote

    • Brand Name: SUTO
    • Principle of Measurement: Thermal Mass Flow
    • Sensor: Glass coated resistive sensor
    • Measuring Medium: Air, gas (non corrosive gas)
    • Protection Class: IP65
    • Dimensions: See Dimensional Drawing On the Next Page
    • Display (optional): 2.4” Color Graphics Display with Keypad

    A compressed testing meters S 401 has needed in nearly some compressed air systems. It supports your monitoring systems supports you to optimize your systems and gas management equipments. Pressure Temperature Sensors the compact monitor your compressed air pressure solution with 4 ... 20 mA output. Current CLamp Sensor Rogowski Coil for wide range at high accuracy.   Air flowing meters has prepaired to be easily to use for gas management measurements equipments manufacturers with reasonable price, we are offering a many other compressed ait testing products. It’s easily made and chooses the correct flow meter for your suggestions, fit for your requirements. The models are meters, created on its measurements principle it’s not compulsory to reward the air compressed testing equipments, needs any additional measurements installation and measuring the flowing consumptions.   As per flowing meters are also suitable for used to gas measurement like nitrogen or several other gases. This S 401 sensors equipment provides you with extraordinary resolutions and sampler rates give exact result and accurate measurements. Our flow meters are capable calibrations curve, owing to these the sensors gas measurements without any damages of precision.   We are provided optional colour display has designed to appearance entirely measurement standards that real flow and totally consumptions. At a time we could succeed the sensor setting likes measurement equipments type available.   Our company manufacturing two different types of flow meter output signals. It can’t stand prepared with an insulated analogue and positive output signal compressor air testing and the totally compressed air consumptions. Otherwise an edge contact all measurement standards through the digitally interface.   Feature Compressed air flow meters Measurement flowing meter and total consumptions Flexible installing for air pressure Two type’s calibrations curve saved sensors in the internal memory We used two different types of gases for sensor IP for industrial environments Pipes diameter to 1” … 12”

    more..
  • Flow Sensor Assembly

    Flow Sensor Assembly

    Get Price Quote

    1 Carton (MOQ)

    • Material: Plastic
    • Application: Industrial Use
    • Warranty: 1year
    • Brand: K Rain
    • Pack Type: Carton Box
    • Available Size: 1 Inch, 1.5 Inch, 2 Inch, 3 Inch, 4 Inch
    more..
  • Best Deals from Flow Sensors

  • NEWPORT e360, e500 Ventilator Flow Sensor FLS2101P

    NEWPORT e360, e500 Ventilator Flow Sensor FLS2101P

    Get Price Quote

    5 Piece(s) (MOQ)

    • Type: Medical Sensor
    • Material: Plastic
    • Application: Medical Use
    • Color: TPT
    • Condition: New
    • Brand Name: Newport
    • Type: Flow Sensor
    • Properties: FLS2101P

    NEWPORT e360, e500 Ventilator Flow Sensor FLS2101P for medical use.

    more..
  • Carestation Anesthesia Flow Sensor

    Carestation Anesthesia Flow Sensor

    27,156 - 35,783 Per Piece

    50 Piece (MOQ)

    • Material: Metal & Plastic
    • Application: Hospital
    • Certification: ISI Certified
    • Type: Reusable
    • Country of Origin: India
    • Size: Standard
    more..
  • Helical Rotor Flow Sensor

    Helical Rotor Flow Sensor

    Get Price Quote

    • Pipe Size: 4 mm to 200 mm
    • Accuracy: ± 1%
    • Connection: Thread / Flanged
    • M.O.C: SS304 / SS316 / PP
    • Rotor: S.S-304 / PP
    • Power Supply: 240V AC, 50Hz
    • Output: Pulse

    Helical Rotor Flow Meters are positive displacement meters with a very favorable low pressure drop behavior. therefore perfectly suited for the flow measurement of very high viscous fluids.

    more..
  • Honsberg Configuration Interface

    Honsberg Configuration Interface

    Get Price Quote

    10 Piece (MOQ)

    • Operating Temperature: 0..+50 °C
    • Storage Temperature: -20..+80 °C
    • Dimensions: 109 mm (W) x 67.5 mm (D) x 34 mm (H)
    • Housing Material: Aluminium
    • Weight: 0.16 kg (interface without accessories), 1.02 kg (case, incl. contents)
    • Make: Honsberg
    • Conformity: CE
    • USB: USB jack type B

    Details : Can be used on site for : Parameter modification Firmware update Adjustment of inputs and outputs Can be connected via USB Characteristics : The ECI-3 configuration interface enables connection of GHM HONSBERG sensors to the USB port of a computer. All sensors of the OMNI, FLEX, and LABO families, as well as other sensors which contain a microcontroller are supported. Both 2-wire and 3-wire sensors are supported. In combination with the 'HI-Tools' Windows software, it enables The modification of all the sensor's configuration settings The reading of measured values The adjustment of inputs and outputs Firmware updates Commissioning : The configuration interface is intended for temporary connection to the application. Permanent installation in the system is not intended. The interface is initially connected to the USB port of the computer using the supplied USB cable. The power supply of the interface takes place via the USB port. Additional auxiliary voltage is not necessary at first. The drivers required for operation are provided on the supplied USB stick and are installed in the usual manner. Connection of the sensors takes place at the 'Sensor' port with the supplied M12x1 extension cable. The supplied adapter can be used for connection of sensors with a valve connector. No additional connections are necessary for operation with 2-wire sensors. The supply of sensors and interface takes place from the USB port. Scope of delivery : ECI-3 configuration interface 1.8 m USB cable 500 mm M12x1 extension Valve connector adapter Adapter K04-05 SUB stick with driver software Carry case A mains connector is not included in the scope of delivery.

    more..
  • Series AFG Averaging Flow Grid

    Series AFG Averaging Flow Grid

    Get Price Quote

    • Type: Series AFG Averaging Flow Grid
    • Material: And Neoprene Rubber.
    • Application: Monitor Air Or Compatible Gas Flow.
    • Color: Silver
    • Feature: Easy To Install, High Quality, Quality Approved
    • Condition: New
    • Finishing: Polished
    • Packaging Type: Carton

    series afg averaging flow grid cost effective air flow station for ducts up to 60" the series afg flow grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the afg flow grid is quick and easy, the afg is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60". the afg flow grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate. how the afg flow grid works the afg flow grid consists of two tubes mounted diagonally across a square or rectangular duct, or diametrically across a round duct. The tubes are drilled with a series of equi-spaced holes. the holes in one tube face directly upstream and sense total pressure, while the pairs of holes in the second tube also face forward but at an included angle of 79 degrees, sensing static pressure. The total and (sub) static pressures are averaged along the length of each tube and provide pressure signals at connectors outside the duct wall. The pressure differentials across these connectors constitute the output signal. product applications to display differential pressure, velocity or volume flow using a micro manometer, gage, or transmitter to give a warning of over or under flow rate using a pressure switch to control air supply in a system by connecting the grid to a pressure transmitter with an electrical output which can be used to feed into a control system to display differential pressure on a simple fluid manometer to give visual indication of changes in volume flow rate in the duct modeldescription afg-1averaging flow grid, 5/16" (8 mm) tube diameter, 27" (688 mm) tube length. afg-2averaging flow grid, 5/8" (16 mm) tube diameter, 59-4/5" (1518 mm) tube length. specifications service:monitor air or compatible gas flow. wetted materials:304 ss, pvc, polyurethane, acetyl plastics, and neoprene rubber. accuracy:±5%. maximum temperature:176°f (80°c). velocity range:295.2 ft/min to 5904 ft/min (1.5 to 30 m/sec). diameter of tubes:5/16" (8 mm) or 5/8" (16 mm). maximum duct diagonal:60.4" (153.4 cm). maximum duct diameter:59.4" (150.9 cm). process connections:5/16" barbed. weight:afg-1: 1 lb (454 g); afg-2: 3 lb (1361 g). features kit complete with 2 probes and installation hardware trimmable length for any duct size up to 60" alternative to costly air flow stations  

    more..
  • air flow sensor

    air flow sensor

    Get Price Quote

    1 Piece (MOQ)

    • Material: Stainless Steel
    • Application: Air Flow Indication,Industrial
    • Feature: Superior Finish, Sturdy Construction, Proper Working, Four Times Stronger
    • Type: Air Flow Sensor
    • Country of Origin: India
    • Flow Rate: 3-100 cm/s (liquid) / 200-3000 cm/s (gas)

    We promise to make delivery on time, as we have a wide spread network of logistic service providers and dealers. We make sure the products we offer are as per national as well as international quality standards, reliable and worth every penny spent by buyer.

    more..
  • air flow sensor AWM3300V

    air flow sensor AWM3300V

    9,000 - 9,500 Per Nos

    5 Piece (MOQ)

    • Type: Air Flow Sensor
    • Certification: As per Industrial Staterd
    • Application: Air Flow Indication
    • Feature: As per Data Sheet
    • Frequency: 0-50Hz, 200-400Hz, 10 - 15 V DC
    • Warranty: 1yr
    • Current Type: 10 - 15 V DC
    • Brand Name: Honeywell
    • Voltage: 10 - 15 V DC
    • Size: Length 54.4 mm Width 15.4 mm Height 31.5 mm
    more..
  • Liquid Flow Sensor

    Liquid Flow Sensor

    Get Price Quote

    10 Piece (MOQ)

    • Material: Plastic
    • Color: Black
    • Power: 20w
    • Application: Industrial Use
    • Type: Liquid Flow Sensor
    • Country of Origin: India
    • Size: 3/4″ Flow Sensor
    more..
  • Oxygen Flow Sensor

    Oxygen Flow Sensor

    Get Price Quote

    1000 Piece (MOQ)

    • Country of Origin: India
    more..
  • Conductivity Flow Cell Sensor

    Conductivity Flow Cell Sensor

    Get Price Quote

    • MOC: CPVC
    • Temperature Range: 0-80°C
    • Process Connection for Sensor:  ½” BSP Female
    • Process Connection for Flow: ¼” BSP Female

    MicroSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.  

    more..
  • Gas Flow Sensor

    Gas Flow Sensor

    Get Price Quote

    1 Piece(s) (MOQ)

    • Type: Gas Flow Sensor
    • Brand Name: Mass Flow
    • Place of Origin: Pune, Maharasthra
    • Condition: Good
    • Unit: Manufacturer

    The Gas Flow Sensor, which we offer, is delivered individually and packed with standard accessories. VT-D-R relay Gas Flow Sensor model is equipped with clear displaying console. The switching point and the hysteresis of relay of this Gas Flow Sensor can be configured by, push button and display user interface.

    more..
  • Diesel Flow Sensor With Panel Mounted Display

    Diesel Flow Sensor With Panel Mounted Display

    Get Price Quote

    • Enclosure: Aluminum anodize/S.S-304/S.S-316
    • Rotor: Aluminum anodize/S.S-316/PPS
    • O-ring: NBR/Viton
    • Shaft: Hard Stainless Steel-316
    • Accuracy (standard installation position): +/- 0.5% ( Higher on request)
    • Maximum working pressure: 10MPa
    • Fluid &Ambient temperature: -40 to80 Deg
    • Power voltage: 5 - 24V DC
    • Connection: Threaded M/F / Flange
    more..
  • Turbine flow sensor

    Turbine flow sensor

    Get Price Quote

    XP is a Full Bore SS body Turbine Flow Sensor suitable for High Pressure water and oil application. Turbine flow sensor is a combination of freely rotating turbine assembly; SS housing and solid state pick-up tungsten carbide-Ceramic bearing makes it practically frictionless producing large linear range.Detachable square wave generated pick-up assembly is much advance solid state device to give output at noisy industrial environment. Variety of matching controllers and indicator are available suitable to match different electronic requirements.  Features: • Outstanding accuracy• Fast response to change of flow.• Suitable for pressurized Oil applications.• Industry Standard End Connections• Cost effective.• Available in 20 mm, 25 mm & 50 mm.» Use of filter before Flowmeter is necessary.» Straight Run condition given in manual must be maintain while installation.    Applications:• Hydraulics• Agriculture• Automobile• Diesel• Wind energy• Food and Beverages• Heavy Engineering• Power

    more..
  • paddle wheel flow sensor

    paddle wheel flow sensor

    Get Price Quote

    paddle wheel flow sensor We are leading manufacturer and exporter of Paddle Wheel Flow Meter. paddle wheel flow sensor

    more..
  • JT 122 SS Sensor + Flow Counter

    JT 122 SS Sensor + Flow Counter

    19,000 - 24,000 Per 10

    • Material: Stainless Steel
    • Color: Black
    • Application: Container Plate
    • Type: Stainless Steel 410s
    • Country of Origin: India
    • Warranty: 1 year
    • Brand: vatukar
    • Brand Name: VATTSMETER,vatukar
    • Finishing: Polished
    • Length: 1-1000mm
    • Grade: SS410s
    • Pattern: Plain
    • Thickness: 1-5mm
    more..
  • RS-900w Polymer Ultrasonic Flow Sensor

    RS-900w Polymer Ultrasonic Flow Sensor

    Get Price Quote

    With a simple design, the RS-900w Polymer Ultrasonic flow sensor is well suited as a long-term replacement for mechanical impeller meters in cold water applications

    more..
  • flow sensors

    flow sensors

    Get Price Quote

    We are offering following Flow sensors a. Thermal mass flow sensors b. Sensors for volumetric flow measurement a. Thermal mass flow sensors Our mass flow sensors for air and gases utilize a highly sensitive thermal measuring principle to detect even smallest flows. The sensors are based on highly stable MEMS silicon chip technology and feature fast response times, low power consumption and bidirectional sensing capabilities. b. Sensors for volumetric flow measurement Differential pressure sensors and rugged differential pressure transmitters for volumetric flow measurement from First Sensor detect the pressure drop across a flow element. Our flow-based ultra-low differential pressure sensors from 0.25 mbar (25 Pa) feature high sensitivity and offset stability as well as high immunity to dust contamination and condensation

    more..
  • IFM Flow Sensor

    IFM Flow Sensor

    Get Price Quote

    • Type: Flow Sensors
    • Material: Metal
    • Application: Automobile Use, Industrial Use
    • Color: Silver
    • Country of Origin: India
    • Brand Name: IFM
    more..
Filter by City
top