Rotary Pumps Dealers in Kuvadva Gidc, Rajkot (5 products available)

Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” (Rotary Twin Gear Pump - Molasses Gear Pump - Positive Displacement Gear Pump - External Gear Pump) Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable.  These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump. These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity.  These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc. Pump Selection @ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used. @ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid  which  have poor lubricant value. @ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Soap solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

These are of oil-immersed, rotary vane type pumps. The rotor, with two springs loaded vanes is mounted eccentric in the stator body, as the rotor, rotated the vanes sweep the crescent shape valve which prevents back flow of air."VINDI" make oil sealed rotary high vacuum pumps are available in single & double stage, V belt driven and are suitable for use with common electric motors.These are being manufactured in 12 different models to cover the suction capacity ranging from 1 cfm to 350 cfm (30 liters/min. to 10,000 liters/min). Single Stage Oil Sealed Vacuum Pumps are capable to develop ultimate pressure of 0.05 mm Hg., while two stage oil Sealed Vacuum Pumps are capable to develop ultimate pressure of 0.005mm Hg. air. With our specific designed pumps, maximum vacuum can be achieved in a very short period. Thus the rise in the temperature of unit is successfully checked and the wear and tear of its components is also reduced. Hence, our oil seal vacuum pump has emerged as a long lasting, noiseless and trouble free performer for years. Same is manufactured from graded material; all moving parts are precisely machined, ground and assembled with close tolerances, this result in increased efficiency and long trouble free operating life.   FEATURES Highest Ultimate Vacuum (Single Stage 0.05 mmHg & Double Stage 0.005 mmHg.) Available in Single & Double Stages Air Ballast Facility Low Noise & Trouble free continuous operation Compact Design Easy Maintenance Simple yet rugged construction Vibration Free Thoroughly tested on McLeod Gauge Condensable Vapurs pumped out through air ballast Efficient, Economical & Extremely reliable for all suction needs Unique after sales service and ex-stock spares availability. APPLICATION Vacuum Filtration Solvent Recovery Moisture Extraction Air Sampling & Handling Pneumatic conveying & Dredging installation Food preservation packaging & Refrigeration Industries Bottle Filling & Dehydration Vacuum forming & drying Freeze drying & Vacuum lifting Priming & Evaporation Crystallization & Sterilization Vacuum Impregnation Medical & Space Research Vacuum Distillation Vacuum Aeration  

Specification : * Barrer pumps empties the drum to residue of 1ltr. * Self proming & also self draining on comletion. * No welding is involved in any part of pumps tubes. * Complete strip down is possible with least number of tools * available in SS 316pppvdf to suite any drum or container * fully enclosed fan cooled eletric motors with on-off Switch

Multistage Centrifugal Pump, Vertical Centrifugal Pump

double helical rotary gear pump, flange mounted geared motors