shapet Electric Company Tagore Road, Rajkot, Gujarat

  • Wax Injector

    Wax Injector

    Request for Price

    This is a heavy duty  wax injector equipped with Digital  Double  display temp. alluminium wax pot ensure uniform heating. 220-240 volts, 500 watts.  

    Voltage : 230 VAC

    ...more
    Get Best Price
  • water jet unit

    water jet unit

    Request for Price

    this machine is made for jewellery casting manufacturer, .in this machine very high pressure water spray for quick removal of investment powder from the casting tree.

    ...more
    Get Best Price
  • Valcanizing Press

    Valcanizing Press

    Request for Price

    The best engineering feature in a slick model. Easy to operateand designed to last.Pre drilled holes for easy mounting .Ideal to eliminate unevenlyvulcanized moulds with s.s heating platens. On/Off power pilot light with automatic temperature controller and one hour digitaltimer on request. Large wheel for maximum leverage , Largediameter rod with box typethread for perfect alignment.Supporting stainless steel bars.

    Power Supply : Single Phase

    Voltage : 230 V AC

    ...more
    Get Best Price
  • Vacuum Casting Induction

    Vacuum Casting Induction

    Request for Price

    SHAPET ELECTRIC CO have much years experience with precious metals sector thus developed this induction system for Jewelry manufacturers and goldsmiths. It runs on Induction principle, Absolute homogeneous alloying and uniform metal distribution with reduction in metal losses is achieved due to uniform temperature controlling which avoids the skin effect in SHAPET Induction Systems. SHAPET GOLD VACUUM CASTING INDUCTION FURNACE. Due to induction current, constantly circulating in the metal automatic stirring occurs, which makes perfect mixing of the alloys with gold, thus it provide much superior quality of the mixing to prepare finished piece of Jewelry. SHAPET GOLD VACUUM CASTING INDUCTION FURNACE. Provided with CHILLING UNIT that helps to eliminating coil burnouts, which is frequent with other electrical furnaces.The SHAPET Induction system is designed to work in two different modes of melting only and casting in one cycle, with capabilities to work in auto and manual mode .to suite the casting cycles. with chilling unit it can be used again and again for any number of charges continuously.

    Voltage : 230 v AC

    ...more
    Get Best Price
  • Submercible Roter Brazing

    Submercible Roter Brazing

    Request for Price

    Submercible Roter Brazing We introduce hightech submersible rotor brazing machine so you can braze your rotor rather than gas welding it is new and innovative technology for saving time and money, and it is verygood for better performance of submesible pumps. Benefits » No requirment of valtage regulator (Dimmer) » Oil free » Compact model » High speed machine » Power saving » IGBT technology » Maintanance free » Operate with compact cooling tower

    Voltage : 440 volt AC

    ...more
    Get Best Price
  • silver melting machine

    silver melting machine

    Request for Price

    SHAPET ELECTRIC CO have much years experience with precious metals sector thus developed this induction system for Jewelry manufacturers and goldsmiths. It runs on Induction principle, Absolute homogeneous alloying and uniform metal distribution with reduction in metal losses is achieved due to uniform temperature controlling which avoids the skin effect in SHAPETInduction Systems.

    ...more
    Get Best Price
  • Silver Melting Induction

    Silver Melting Induction

    Request for Price

    10,15,20 kg Silver Melting Induction SHAPET ELECTRIC CO have much years experience with precious metals sector thus developed this induction system for Jewelry manufacturers and goldsmiths. It runs on Induction principle, Absolute homogeneous alloying and uniform metal distribution with reduction in metal losses is achieved due to uniform temperature controlling which avoids the skin effect in SHAPETInduction Systems. SHAPET Induction system is available with two differant capacity 10 kg & 20 kg melting.  Both this systems have capability to work in auto mode or manual mode for the convenience of melting and temperature controlling. As chilling unit is standard equipment

    Voltage : 440 volt AC

    ...more
    Get Best Price
  • Meganitic Polisher

    Meganitic Polisher

    Request for Price

    A magnetic polisher speeds up the polishing process considerably. However, there are still a number of steps required to polish a piece and to maintain the machine.. These instructions are geared toward the smaller sized machine. For the larger machines, more items can be polished using less time. 1. First, use a fine jeweler’s file to remove scratches, excess solder, and other blemishes from the metal. Try to remove as many blemishes as possible with the file. This is especially important because the machine is not designed to remove scratches. 2. Make sure pieces are clean. For example, cast pieces should be free of all investment. (Ammonia and an old, soft tooth brush work well for cleaning investment off charms.) 3. The steel shot should be kept in the plastic tumbler along with water in order that the shot does not rust. When it is time to polish, replace old water with clean water and fill up to the maximum line as marked on the outside of the tumbler. 4. Next, burnishing soap is dropped into the water. The amount of soap needed depends on the size of the machine. For the smaller machine, approximately 8 drops are recommended.   5. Place metal pieces into the tumbler and replace the lid. If pieces are small, about 8 – 10 can be polished at the same time. 6. Set the tumbler on top of the base. You’ll feel the pull of the magnets to the shot.   7. Plug in the machine, set the timer to 20-40 minutes according  metal qty, and turn it on. You’ll soon see your shot and jewelry whizzing around. 8. due to automatic system machine jewelery whizzing forward and reverse as per seting forwad and reverse time . you can set forward and reverse time in min(eq, 2 min forward 2min reverse= 1 cycle) Use can set 99 cycles, and forward 99 min and reverse 99 min. Note:It is important to remember not to leave the tumbler on the base when the machine is not in use, or the shot will eventually become demagnetized. Also, unplugging the machine is an extra precaution in case the lid is accidentally lifted from the tumbler while the machine is on. If this were to happen, all that tiny, steel shot would go flying! 9. Poor out the water, which is very warm now, being careful not to pour out the shot. Remove the pieces from the tumbler, and dry them using a soft, clean cloth or paper towel. 10. After each polishing, it is recommended that the tumbler and shot be cleaned. First, empty the water from the tumbler. The metal shot should fall to the bottom if you only slightly tip the tumbler and not turn it completely up side down. 11. Now, the tumbler should be rinsed out with clean water a number of times until the water looks clear. Swish the shot around with your fingers each time you rinse also.

    Voltage : 230 Vac

    ...more
    Get Best Price
  • low level Silver Melting Induction

    low level Silver Melting Induction

    Request for Price

    Voltage : 440 VAC

    Get Best Price
  • Jewellery Weigh scale

    Jewellery Weigh scale

    Request for Price

    We are experts in bringing forth a wide range of Jewelery Weigh Scale for our valuable clients. Adhering to international quality standards, these scales are developed by employing latest technology. Widely used in many laboratories, these scales are well known for their accurate measurements and reliable performance. Further, these scales can also be used in various industries  

    Power Supply : Single phase

    Voltage : 230v

    ...more
    Get Best Price
  • Industrial Chiller Machine

    Industrial Chiller Machine

    Request for Price

    FEATURES AND BENEFITS     To control various temperature (-20 centigrade- +40 centigrade) accurately during industrial production   The series chiller have manufacturing experience for about twenty years, Install an usage simple, support in brief.   Components are from world known manufacturers to make use stable performance and exactitude, stabilization, long service life.   According the requirement, in the same unit, there are more than two independent refrigeration loops.   Perfect Protection Device (Time Delay, Water Scarcity Protection, the water flow protection, the control and display of high and low pressure, Temperature Control and Display, phase protection, Overload Protection, Frostbite Prevention, Automatic complement water.)   Evaporator: can choose stainless steel tank type or shell pipe type or shell and tube type.   Water-cooled condenser: choose shell pipe or shell and tube.   Air-cooled condenser: adopt special heating panels, Bear corrosion, which have a long using life. The effect is constant from beginning to end.   Refrigerant: R-22   We make chiller according costomers requirnments.

    ...more
    Get Best Price
  • induction kadai

    induction kadai

    Request for Price

    SHAPET launch induction kadai specially for commercial and professional cooking. This kadai is more convenient to the operator to operate rather than other technology like gas, oil and other technology of cooking. This kadai is also eco friendly because it not pollute environment like fume, smel, etc.  Benefits » Safe cooking. » Easy operation. » It can be also operate in open space as well as a/c condition without disturbing surrounding environment. » Totally fume less device. » No noise pollution. » No air pollution.

    ...more
    Get Best Price
  • induction Heating for SS Utensil

    induction Heating for SS Utensil

    Request for Price

    Annealing is a heat treatment in which metal is exposed to an require temperature and slowly cooled. Annealing of the matel changes physical properties of the material such as strength and hardness. Benefits » There is no crack when sheet emboss » Fast productivity

    Voltage : 440 VAC

    ...more
    Get Best Price
  • Induction Hardning

    Induction Hardning

    Request for Price

    Induction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole.

    Voltage : 415 VAC

    ...more
    Get Best Price
  • induction dosa plate

    induction dosa plate

    Request for Price

    Shapet Induction dosa / chapati plate is suitably designed for making dosa with thick MS plate and covered on three sides with stainless steel sheet, there is no grease sticking in the surrounding areas. The whole unit is mounted on stainless steel square tube stand. Special  feature due to induction heating ms plate become hot very quick, and maintain perfect temperature with help of digital temperature meter is that at one point of a time it is feasible to make number of dosas / chapatis depending upon the size of the dosa plate, so that more customers are served in a short while.  This is used at hotels, restaurants, industrial canteens, hospital canteens, fast food centers, wedding halls, hostels, and charitable institutions.   Benefits » Instant Heating » Digital Temarature controller » Power saving Mode » No Heat loss, Maximum Efficiency » Roughed Design & Easily Moveble

    ...more
    Get Best Price
  • Gold Melting Machine

    Gold Melting Machine

    Request for Price

    SHAPET ELECTRIC CO. have much years experience with precious metals sector thus developed this induction system for Jewelry manufacturers and goldsmiths. It runs on Induction principle, Absolute homogeneous alloying and uniform metal distribution with reduction in metal losses is achieved due to uniform temperature controlling which avoids the skin effect in SHAPET Induction Systems.

    ...more
    Get Best Price
  • gold melting Induction

    gold melting Induction

    Request for Price

    SHAPET ELECTRIC CO. have much years experience with precious metals sector thus developed this induction system for Jewelry manufacturers and goldsmiths. It runs on Induction principle, Absolute homogeneous alloying and uniform metal distribution with reduction in metal losses is achieved due to uniform temperature controlling which avoids the skin effect in SHAPET Induction Systems. SHAPET Induction system is available in two different capacities 1Kg and 2Kg for your convenience of better melting. Both this systems have capability to work in auto mode or manual mode for the convenience of melting and temperature controlling. As chilling unit is standard equipment

    Voltage : 230 V AC

    ...more
    Get Best Price
  • Gms Melting Induction

    Gms Melting Induction

    Request for Price

    Shapet Electric Company  have developed this induction Meltor for  Jewellery shops to give world class quality product at economic price. Advantage of  small Melting machine  is very less space require & melting in very less time only 3++ min . The Shapet induction system is available in 300 gms melting capacity and most suitable to show room, goldsmith, workers and is most advanced induction system with digital Auto temparature control . 

    Voltage : 230 VAC

    ...more
    Get Best Price
  • flask vacuum machine

    flask vacuum machine

    Request for Price

    This machine is made for vacuum air from investment powder at the time of mixing water. and after pourin poweder(water mixed powder) in the flask.  

    ...more
    Get Best Price
  • Dwaxer Flask Vacuum Machine

    Dwaxer Flask Vacuum Machine

    Request for Price

    Superb finished stainless steel body with top opening. Eminently suitable for elimination of wax by steam to reduce porosity and carbonisation in castings. Equipped with electric heating elements , adjustable temperature controller, On/ Off switch with indicator lamp. Removes wax from flasks in one hour.  

    Capacity : 12 flask of size 4"X7" (12 Flask Dewaxer)

    Capacity : 6 flask of size 4"X7" (6 Flask Dewaxer)

    ...more
    Get Best Price
  • Continuous Casting Furnace

    Continuous Casting Furnace

    Request for Price

    Shapet Top Vertical induction furnace for continuous melting and casting of gold and silver metal alloy  in wire . Equipped with FUJI japan PLC with auto and manual modeautomatic melting programs, with display furnace. Circular die cooling.Medium frequency generator of new TechnologyFurnace suitable for: Wire: Min. 5 mm - Max. 8 mm 

    Melting Time : 8 to 10 MIN

    ...more
    Get Best Price
  • Chilling Plant

    Chilling Plant

    Request for Price

    We made chilling plant  as per customers requirments  

    Voltage : 230 Volt AC

    ...more
    Get Best Price
  • Burnout Casting Furness

    Burnout Casting Furness

    Request for Price

    These burnout furnaces are made with superior one-piece insulation section on all walls, instead of multiple assembled joint pieces. This ensures better heat distribution, saving of power and long trouble-free life. It features a microprocessor programmer with delay starting feature, and is suitable also for real diamond studded wax-models.   

    Size : 8x8(inch), 10x10(inch) 12x12(inch) 15x15(inch) and 18x18(inch)

    Power Supply : Single Phase

    Voltage : 230 Volt AC

    ...more
    Get Best Price
  • Brazing Submercibal Rotter Brazing

    Brazing Submercibal Rotter Brazing

    Request for Price

        The job is placed in various shape of coil as per application and when high frequency current passed through coil the induced current flows in job and as per joules law Q = I2 x R x T the heat is generated ( I = Current in job, R = Resi. of job T = Time in sec. ) Hence the job heats up quickly.  As per the application job is quenched in proper quenching media for HARDENING, co...  

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
shapet Electric Company is Retailer of Gold Melting Machine, silver melting machine, induction Heating for SS Utensil, Brazing Submercibal Rotter Brazing, Submercible Roter Brazing, Billet furnace, Vacuum Casting Induction, Burnout Casting Furness, Dwaxer Flask Vacuum Machine, flask vacuum machine in Rajkot, Gujarat.
Read More »

Contact Information

Shapet Electric Company

  • Sureshkumar B. Chikani
  • 317,Silver Chamber,Tagore Marg,-360002, Tagore Road, Rajkot, Gujarat

Find Popular Vacuum Wax Injector Dealers in Rajkot

top