UV Sensors Dealers (40 products available)

• Spectral Range: 250 nm to 400 nm
• Measurement Repeatability: : < 1 %
• Response Time: < 1 ms Field 1 ms Field of View: 180o
• FEATURES: Custom options available ,Test UV stability of products .,Measure UV filtering of various materials

Low levels of UV light have a positive effect on plant growth and seed germination but higher levels can be harmful and even toxic. UV sensors can be used to measure the light intensity from 250 nanometers to 400 nanometers, whether the source is the sun, fluorescent lights, germicidal lamps or other sources of UV radiation.

• Spectral reponse: 280 – 315nm
• Dual Voltage output: 10mV / 1V
• Response time 95%: < 1 Sec.
• Non-linearity: < 2 %
• Directional response Incident Angle 0° to 70°: < 10 %
• Temperature response -10°C to 50°C: < 1.5 %
• Output Analog: 0 – 1 V
• Impedance: 10 Ω
• Operating temperature range: -10 – 50 °C
• Cable length: 10 m
• Wavelength range: 280 – 315 nm (50% points)
• Power supply: AC100-240V, 50/60Hz, 30W

• Brand Name: Honeywell
• Model Number: C7027A1023
• Place of Origin: India

We are offering honeywell uv flame sensor.honeywell uv flame sensor c7027 available exstock.Honeywell Uv Flame Sensor

• Type: AF44
• Brand Name: endress+hauser
• Model/Type: UV SENSOR
• Wavelengths available: 254, 280, 295, 302, 313, and 365 nm, others available upon request
• Cable length: 10,15, 25 and 50ft, Custom Lengths up to 300ft maximum (3, 5, 8, and 15m, up to 91m maximum)
• Max temperature: 80 Degree C
• Lamp power: 4 watts
• Cable Connectors: Nickel Plated Brass
• Features: Compact design, Rust free, Perfect finish

The ML8511 breakout is an easy to use ultraviolet light sensor The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected This breakout can be very handy in creating devices that warn the.. user of sunburn or detect the UV index as it relates to weather conditions. This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. It outputs a analog voltage that is linearly related to the measured UV intensity (mW / cm2). If your microcontroller can do an analog to digital signal conversion then you can detect the level of UV! OKI (OKI) to launch the built-in operational amplifier ultraviolet (UV) sensor IC – ML8511. The use of silicon coated product (SOI) on the insulating -CMOS, the company’s first analog voltage output, no filter UV sensor. OKI’s UV sensor IC is easy thanks to the high degree of integration of SOI-CMOS technology, suitable for digital and analog circuits. OKI, said the company’s future will utilize this expertise to strengthen the connection of the microprocessor digital output circuit, and then with the brightness control sensor sensing type (Ambient Light Sensor) constitute a single chip lineup of merchandise; hope not only to future products done for the day at a glance the amount of UV, and ready to grasp the degree of risk decorative UV measurement equipment, and will promote the application to appliances, portable field equipment. ML8511 UV light can be used with an analog voltage output proportional to the amount. Since the output voltage can therefore be directly connected to the MCU built A / D digital / analog converter, no photoelectric converting circuit. And the use of small, low-profile surface-mount package, suitable for use in portable devices.

Outputs analog voltage as per UV radation falling on it. Easy to interface with any MCU with ADC. Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can detect the 240-370nm range of light (which covers UVB and most of UVA spectrum). The signal level from the photodiode is very small, in the nano-ampere level, so we tossed on an opamp to amplify the signal to a more manageable volt-level.

• EAS: 0 Wm-2 to 300 Wm-2
• UV Index: 0 UV Index to 16 UV Index
• Daily Dose: 0 MEDs to 200 MEDs
• Accuracy: 2 %
• Digital Interface Type: Serial Digital (UART), RS485/RS232 ,9600-115kbaud

The KDS-061 is a multi-drop capable high-performance sensor for the measurement of quantum of global UV flux incident. The sensor measures the full UV spectrum and is a global sensor i.e. one which measures radiation from all directions which includes solar irradiance and scattered components reaching the measurement point. The response is Erythema Action Spectrum (EAS) weighted..     Features   User Configurable Flexible Averaging Filter Completely Processed Results in Engineering Units Low Power Consumption and Easy Integration Time Integration (Totalization) Available Rugged Corrosion Resistant Build

• Brand Name: DFRobot
• APPLICATIONS: UV-A Lamp Monitoring, UV Index Monitoring, DIY UV electronic project,etc
• UV wavelength: 200-370nm
• Features: This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight

The ML8511 sensor breakout is an easy to use ultraviolet light sensor. The MP8511 UV Sensor outputs an analog signal in relation to the amount of UV light it detects. This can be handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions. This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. The ML8511 sensor is very easy to use. It outputs a analog voltage that is linearly related to the measured UV intensity (mW/cm2). If your microcontroller can do an analog to voltage conversion, then you can detect the level of UV. Next, connect the following ML8511 breakout board to Arduino: LAPIS Semiconductor developed the UV sensor ( ML8511A ) to detect a ultra violet rays with Si ( silicon ) device using the original SOI ( silicon on insulator ) technology. The ML8511A measures the amount of ultra violet rayses contained in sunlight, and it is used for the equipment which displays the suntan by a ultra violet rays, the guidance for UV care of skin, etc.  The ML8511A is ideal for mobile computing devices, such as a smart phone, a mobile phone, and a watch, at low power and a compact package (QFN).

Avail from us high grade UV Sensors that are available at industry leading prices. These are well appreciated by our clients for their optimum performance. We supply optimum quality UV Sensors to our esteemed clients. Having high sensitivity and fast response, they deliver high performance. Useful In Industrial BurnersGas/ Heavy oil BurnersFurnaceIndustrial Equipment's etc.

• Range: 30m
• Detecting Angle: 90 Degree
• Voltage: 230 V
• Packaging Type: Box
• Temperature Range: +60 deg C
• Humidity: 95%

• Type: UV
• Color: Black
• Brand Name: SIEMENS
• Model: QRI2B2.B180B
• Temperature Range: 85 degree
• Input Voltage: mA
• Sensor Length: 3 FEET

• Type: Uv Sensor
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w, 20w, 25w
• Warranty: 1year, 2years
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr
• Max Temperature: 80 Degree C
• Lamp power: 4 watts

• Features: Rugged construction, Hassle free performance, Low maintenance

• Type: AUTOMATIC UV RADIATION CONTROL
• Brand Name: SIPOS ZURICH
• MODEL: UV 47

sipos zurich uv 47 automatic uv radiation control uv47 model: uv 47 type: automatic uv radiation control condition: used & working qty: 1 pc available  ref: al.

• Type: UV Sensor
• Model/Type: C7023A1023
• Brand: Honeywell
• Range: -18 C to 102 C

We are manufacturer of uv sensor, steam boiler/ incinerator/ hot air/water generator/ thermic fluid heater/ autoclave / bio medical waste shredder / burner/boiler & its spares/supplying of synthetic thermic fluid oil/ .

• Brand: Azbil
• Size: 18 D x 75 L mm
• Pressure: 5 psi
• Voltage: 220 V
• Frequency: 50-60 Hz

• Brand Name: Honeywell
• Warranty: 12 Months
• Max. Current: 20 Amp-100 Amp
• Voltage: 200VDC
• Frequency: 50HZ
• Setting Range: 0-1500pF
• Normal Position: Normally Closed (NC), Normally Open (NO)

Honeywell UV Sensor, Honeywell Pressure Transducer

Uv Sensor, Head Mounted Temperature Transmitters

UV SENSOR FOR UV INTENSITY METER.

Flame Sensor UV Sensor, modulating motor

Uv Sensor

UV Flame sensor gives the signal of the presence or absence of a flame or UV light. The Flame Detector Relays Flame switches used with appropriate sensors energies the UV photo-tubes absence of the flame, the Flame-ON relay is de-energized and shuts–off the fuel solenoid valves as a safety measure to prevent any explosion.

Uv Sensor, linear encoders, Vision Sensor, Through Beam Sensor, load sensor

We make available Ultraviolet Sensor that delivers optimum performance. We are enlisted among the reputed Manufacturers, Exporters, and Suppliers of Ultraviolet Sensor from Uttarakhand. We manufacture Ultraviolet Sensor using high-grade components that are sourced from the reliable vendors of the market. To cater to the extensive demands of the customers, we offer Ultraviolet Sensor in bulk quantity. Details : Output : Calibrated to approx 0.1 mv per µmol m-2 s-1Range : 250 to 400 nanometers in µmol m-2 S-1 (Full UV in Sunlight : 170 µmol m-2 s-1)IInput Power : None, Self-Powered Operating Environment : Outdoor use. Can be submerged underwater. Materials : Photodiode with a fully-potted PVC head.

UV Sensors, Actuators, Ignition Transformers, flame switches, Flame Sensors