Vibratory Dryer Dealers (56 products available)

Vibratory Fluidised Bed Dryer is an extension of fluidised bed techniques, by using vibrations as an external aid to fluidisation. All materials cannot be fluidized because of one or more of the following reasons: 1. Excessive moisture 2. Strong surface forces 3. Wide particle size distribution 4. Fine Powder 5. Product characteristics Some of the materials having such properties can also be fluidized well with the air of mechanical vibrations. Vibrations breakup the inter-particle forces of attraction and improve quality of fluidization. Bubbling of hot air in a stationary fluid bed may cause violent agitation. When vibrations are used as an air, gas velocities are reduced and the fluidisation is gentle. Particle attrition is reduced. Thus substances having low mechanical strength can be dried without damage.

Features Rugged heavy duty special vibratory motor In built separation arrangement Continuous / recirculatory operation Can be automated and added onto the total system Temperature controller Finishing Media Ceramic Media: Ceramic Media for Heavy Cutting, Deburring, Descaling, Edge Radiusing & Fine Finishing of different types of work pieces. Ceramic media are used on hard ferrous & non¬ferrous metal like, Mild steel, stainless steel, hard casting, EtcPlastic Media: Plastic Media for polishing, deburring & finishing of non-ferrous components & casting. Plastic media have low density so this media is used on soft metals such as Aluminium, Zinc and alloys of Brass, Copper Etc....Steel Media: Steel Media are used for burnishing to obtain lustre & mirror finish. This media generally used for S.S., copper, brass component Etc...Corn Cobs: Corm Cobs used for drying process. Corn cobs have replaced Saw dust as drying media. Corn cobs are also used for polishing of ferrous & nonferrous components, Etc... User Industries / Institutions • Vibrator & Centrifugal machine manufacturing units • Forgings Bicycle parts mfg. • Sewing machine parts mfg. • Automobile components mfg. • Bearing cages • rollers and retainers Hand tools • Spectacle frames & components • Surgical instruments • Ortho tools mfg. • Clutch plate mfg. • Buckle mfg. • Zinc, aluminium and other die casting • Sheet metal pressing Pressed parts mfg. • Control gear parts • Electroplating Lock & key mfg. • Textile machinery parts mfg. • Advanced Ceramics • Non-ferrous parts of brass, copper, etc. • Castings & sintered components Switches mfg. • Jewellery & cutlery items

• Country of Origin: Made in India
• Material: MS
• Power: 0.5 HP
• Bowl Outer Diameter: 650 mm
• Model Number: FTVD 50
• Capacity: 50 Kg

CONTINEOUS FLOW VIBRATING FLUID DRYER-ROASTER COOKER   Fluidization of wet materials such as tea, grated coconut, spices and any Granular / powder is not possible by air alone. The SAKAV VFBD uses a combination of Vibration and a Special Air Distribution plate to effectively fluidize such materials.   Compact design of the SAKAV VFBD enables single pass drying, making it an ideal and fuel efficient drying equipment.   SAILENT FEATURES   Robust design / Long life Hygienic construction Minimum space requirement Suits any heater / fuel Easy to operate   MACHINE DESCRIPTION :-   The Machine consist of a Vibratory Conveyor over which is moulded either a gas fired infra red manifold. or an electrical manifold, or any other HotAir Media, steam, Gas etc. The material is fed onto the vibratory conveyor from a feed vibrator controlled by a rheostat. As the material pass under the infra-red burners they are subjected to a continuous vibration in order to turn the material over many times. This enables all the material to receive an equal amount of of infra-red burners can be varied so that the material can be dried, roasted or for various periods, in order that the materials may reach an internal temperature. The hot material are then immediately elevated into an insulated maturing holding bin. where they continue to cook with their own residual heat, for predetermined periods which can be varied as desired. Depending on the final reduction of moisture.   A measured quantity of material is fed onto a specially designed stainless steel perforated vibrating plate mounted on an aerodynamically designed plenum chamber. The entire assembly of plenum chamber and perforated plate is suspended on spring and vithrealed with electric Balanced Meter. Hot air from the heat source is sucked in and forced through the plenum chamber by a hot air blower.   The plant is complete with feed hopper, electrical control, cooler, insulated maturing holding bind, cooling fan. cyclone and airtrunking.   GAS FIRED INFRA RED BURNERS AVAILABLE.   OUTPUT :-   Output from 25 Kgs. / Hr. to 2 Tones / Hr. Heating Capacity varies from machine to machine depending material, Drying Time & etc.   CONSTRUCTION :- All parts in contact with the product are in Stainless Steel constructions. The entire vibrating bed assembly is encased in a rugged self-supporting casing of channel frame construction

Driers important if parts are to be painted or plated. Vibro Dryer is used for drying of wet components. The dryer is filled with water absorbing media like corncob. The wet components when tumbled with corncob, it gets nice wiping action and Stain Free Drying is achieved. Longer process time here enhances luster of the components. The time cycle can be infinitely varied after which the unload flap is flipped into position and parts are discharged via the unloading screen. The cob remains in the bowl. Bhalani Industries range of driers ensures parts dry stain and corrosion free following the mass finishing process. This is particularly important if parts are to be painted or plated as a final operation. Driers are an essential part of the complete mass finishing solution. Feature :       Continuous / recirculatory operation.       Can be automated and added onto the total system.       Variable speed controller.       Sound and dust control lids.       Rugged heavy duty special vibratory motor.       In built separation arrangement.

• Features: Less maintenance, Durable finish standards, Noise-free operations

• Color: Green
• Usage: Food
• Product: Dryer

vibro fludised bed dryer

ACMEFIL Fluid Bed processing includes Drying as well as granulation, agglomeration and coating of particulate materials. It is designed to uniform drying of the material at low temperature and is ideal for a wide range of both heat sensitive and non-heat sensitive prodcts for low moist powder. In case of fluid bed coater cum granulator, agglomeration and granulation may be performed in a number of ways depending upon the feed to be processed and the product properties to be achieved. Fluid bed coating of powders, granules involves the spraying of a liquid on the fluidised powder under strictly controlled conditions. We offer fluid bed drying system made up of S.S.304 / S.S. 316 with GMP standards. The complete unit is supplied with suitable motor, blower, filters, filter bag, & control panel. Heating system will be provided as per customer requirement i.e. Steam / Electric Heating system and any other. Salient Features Availabale capacity of Fluid Bed Dryer is 2.5 Kgs to 300 Kgs. Time, space, energy and labour saver Automatic shaking arrangement Safe earthing device with low voltage relay Design confirming to cGMP norms and its documentation Flame proof electrical PLC for automation and control Single piece construction with modular type design HEPA Filtration system Dehumidification of inlet air Solid Particle Flow Monitor Sampling port on product container   Vibratory Fluid Bed Dryer - Continuous type These driers have a bed of solid particles, which are fluidized by passing a stream of air or gas upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids. The air or the gas is heated and the heat is utilized to dry the solids. Fines get agglomerated to larger particles thus providing large size granules. A vibratory motor can also be used to provide a mechanical forward motion to the fluidized solid particles. APPLICATIONS OF FLUID BED DRYER VIBRATORY TYPE Fluid Bed dryers have universal applications like: Chemical Industry Pharmaceuticals Industry Bio-Chemicals Industry Polymer Industry Food and Dairy Products Industry

Vibratory fluidized bed dryer (vfbd) is a type of fluidized bed where the mechanical vibrations enhance the performance of fluidization process. Its vibration properties proves to be more efficient in dealing with fine particles which appears to be very difficult to achieve with normal fluidized bed many of the industrial material needed physical movement during. This has been overcome by means of vibrators directly mounted on the body of the fluid bed dryer. The vibration level of is dependent on the behavior and nature of the material to be dried, the amplitude can be adjusted by adjusting the unbalanced weight of the vibrators. The drier is mounted on the four pillars with springs in between pillar and the fluid bed drier to avoid vibration transfer from fluid bed drier to structure. This gives a much lower product residence time per unit bed area than non-vibrating beds which can have powder layers up to 1500 mm. It can be operated as a separate drying or cooling unit. Some of the advantages of vibratory fluidized beds include – continuous drying throughout the unit handle products with a wide range of particle size and shape. Minimal fluidization velocity and pressure drop due to the vibration energy being transferred along the bed. Increase efficiency of gas to solid contact. Mechanical vibration enhances homogeneity and stability of fluidized bed layers easier to control the residence time distribution of processed material by manipulating the intensity of amplitude and frequency of variation range of applications – vibratory fluidized beds are mainly used in several industries such as pharmaceutical agricultural catalyst plastics minerals food processes typical applications for vibratory fluidized beds are drying products in the form of grains and crystals, cooling the dried products, agglomeration and granulation of coarse particles, and sterilizing.

Controlled drying with continuous processing Vibratory Fluid Bed Dryer are used for mass heat transfer and have relative smaller residence time. SAKA’s Vibratory Fluid Bed Dryers are known for its versatile applicability with a ability to process wet as well as semi wet products. Vibratory motion in this type FBD’s moves the product through Dryer. Usually a push-pull system is used to balance the pressure to slightly negative in the free board of the fluid bed. Depending upon the product and available heat source, direct or indirect heating may be applied. Then the exhaust air is cleaned by bag filter, cyclone with or without wet scrubber. SAKA’s Vibratory Fluid Bed Dryer are known for maintaining equilibrium of thermal efficiency and moisture content of the material thus ensuring effective, efficient and controlled drying.

It is a Fluidised Bed type for efficient dryingcooling of various materials. It can bring down moisture level from 15 to 0. Materials can be also heated very efficiently by this method. ”Fluidised bed drying” is the most efficient way. It is useful for alumina, coal and all materials.

• Motor Power: 0.25HP
• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Heating Capacity: 0.5x 2 KW
• Model Name/Number: DR-50
• Outer Diameter: 600mm

• ranges: 25 to 1200 liters / hr.

Continuous Vibratory dryer is the continuous drying range that builds on the proven Umang technology and its benefits. Similar design of Vibration distribution plate and vibrators ensures that process and validation wise there is no difference to the drying process. This unique design of process plate, and vibrators makes the not only a perfect drying system but also an ideal machine.The Vibratory dryer ranges from 25 to 1200 liters hr. drying capacity featuring through the wall design and movable head, allowing operation with platform and dust-free discharging via a linked mill directly into an IBC. The Vibratory dryer can be stand-alone or linked to a fluid bed to form an integrated system.

We are offering vibratory drier. Model number : cvbd-250, cvbd-500, cvbd-1000 description : the vibratory drier has a smaller footprint as compared to the conventional belt driven drier. This equipment is simple to operate and incorporates pneumatic actuated automatic off-loading systems and works on the principle of spiral and rotational forces to achieve the desired results.

Vibratory fluidised bed dryer is an extension of fluidised bed techniques, by using vibrations as an external aid to fluidisation.

• Type: Fluid Bed Drying Equipment
• Certification: ISO9001 2015
• Weight: 200KG to 5000KG
• Warranty: 1 Year
• Condition: New
• Place of Origin: Gujarat, India
• Dimension(L*W*H): 1380*1200*2000
• Drying Process: Fluidization
• After-sales Service Provided: Engineers available to service machinery overseas
• Supply Ability: 5 Unit/Units per Month
• Packaging Details: Product & Transport Worthy Packing

Vibrating Fluidized Bed Dryer is designed to dry Coconut powder for converting into Desiccated Powder.

• Power: 5 HP
• Automation Grade: Semi-Automatic
• Material: Mild Steel
• Max Temperature: 50 Degree
• Surface Finish: Paint coated

One piece welding construction without bolting joints. Rugged heavy duty special vibratory motor. In built separation arrangement. Control panel with thermostatic temperature controller.

The Vibratory Fluid Bed Dryer Manufacturer is used for fluidization of materials which are often characterized by having one or more of the following physical properties:   Wide particle size distribution Low strength of wet or dry particles Stickiness or thermo plasticity of the particles Pasty properties of the wet feed   In the Vibratory Fluid Bed Dryer Manufacture, the material is easily transported through the dryer by the combined effects of fluidization and vibration. The fluidization velocity can be judiciously selected to minimize entertainment of the smaller particles, to avoid gas bubbling m the fluid bed thereby minimizing attrition. The residence time can be adjusted, by varying the bed height, through the overflow weir position. A cooling section can also be provided, by partitioning of the plenum chamber. Vibratory Fluid Bed Dryer Manufacture have a bed of solid particles, which are fluidized by passing a stream of air or gas upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids. The air or the gas is heated and the heat is utilized to dry the solids. Fines get agglomerated to larger particles thus providing large size granules. Voice Engineers is a Our wide-ranging technology and supply program means that we can combine our dryers and screening machines to make economical complete plants, e.g. for manufacturing potato granulate. Vibratory Fluid Bed Dryer Manufacture are supplied as continuous dryers or batch dryers. As vibration dryers, they adapt to the specific properties of the products to be processed and to the process management particularly effectively. APPLICATION : Drying or cooling, process for salts, chemicals, Tea, cereals and Milk products (used as a secondary dyer)

SALIENT FEATURES OF GEM VFBD Perfect Fluidisation Operation Longevity: Sturdy Construction of the Machine High Thermal Efficiency of the System : Saving of Fuel Costs Superior Quality of the Product : More Value for Money Hygienic Construction :  All Contact parts are made up of Stainless Steel Compact Structure of the Unit : Minimum Space Requirements Environmentally Sustainable : No Fly Off Centralised Control and Monitoring No Oozing of Oil Negligible Inventory of Spare Parts

Vibratory Fluidized Bed Dryers(VFBD) is another type of fluidized bed where the mechanical vibration, enhance the performance of fluidization process. Since the first discovery of vibratory fluidized bed dryers, its vibration properties proves to be more efficient in dealing with fine particles which appears to be very difficult to achieve with normal fluidized bed dryers.VFBDs are fitted with a specially designed Dual Damper that facilitates the two stage temperature drying process. Fitted with an efficient fiber extraction cyclone system and Dust extraction & re-firing system, this machine helps in the manufacturing of best quality tea.    Truly fluidized bed.   Aerodynamic plenum chamber.   Efficient single firing type multi-clone de-dusting system.   All contact parts in wet zone including dustractor impeller are of stainless steel.   Excellent liquor and bright infusion.   Modular design ensures easy transportation and installation.

Driers important if parts are to be painted or plated. Vibro Dryer is used for drying of wet components. The dryer is filled with water absorbing media like corncob. The wet components when tumbled with corncob, it gets nice wiping action and Stain Free Drying is achieved. Longer process time here enhances luster of the components. The time cycle can be infinitely varied after which the unload flap is flipped into position and parts are discharged via the unloading screen. The cob remains in the bowl. Vibromatic Industries range of driers ensures parts dry stain and corrosion free following the mass finishing process. This is particularly important if parts are to be painted or plated as a final operation. Driers are an essential part of the complete mass finishing solution..   FEATURE Continuous / recirculatory operation. Can be automated and added onto the total system. Variable speed controller. Sound and dust control lids. Rugged heavy duty special vibratory motor. In built separation arrangement.

Vibratory dryer machine is used for drying of work pieces after finished process of vibratory finish, especially in cases, when work pieces must not oxidize. Round drier is filled up with drying media (maize grains of different sizes). Wet work pieces are continually loaded in the machine and passing through the process channel in the pre-heated drying medium, which is heated by heating elements in the vibratory drying machine.

• Power Source: Electric
• Automation Grade: Semi-Automatic
• Capacity: 500Litre/hour
• Material: Mild Steel
• Country of Origin: Made in India
• Frequency: 50-60 Hz
• Phase: Three Phase
• Voltage: 280 V
• Finish: Color Coated

We offer the best quality Vibratory Fluid Bed Dryer in the market. The Vibratory Fluid Bed Dryers are supplied as continuous dryers. As vibration dryers, they adapt to the specific properties of the products to be processed effectively. The Vibratory Fluid Bed Dryer offered by us is known for its easy operation and long lasting functional life. The Dryer is available in different capacities like Junior, Standard and Jumbo which depend upon the type of product to be dried and moisture content of the product. Features Low dry material temperaturesGentle treatment of sensitive productsDryers with optional cooling compartmentHandling of products with a wide particle spectrumSimultaneous product dust removalIntegrated stirring zone for products with a tendency to clumpingInfluence of the holding time and therefore the quality of products Applications TeaDesiccated CoconutPharmaceutical Industries

Vibratory Fluid Bed Dryer (VFBD) is by far the most efficient and cost effective equipment used for drying tea, both CTC and Orthodox varieties. Vikram's VFBDs are fitted with a specially designed Dual Damper that facilitates the two stage temperature drying process. Fitted with an efficient fiber extraction cyclone system and Dust extraction & re-firing system, this machine helps in the manufacturing of best quality tea.