Water Pumps Dealers in Bhavnagar Road, Rajkot (22 products available)

Pump Head

We have Submersible Pumps with different capacity level. Submersible Pumps are designed to be fully immersible within a tank or other media storage receptacle. The motors of Submersible Pumps are normally sealed in oil-filled cavities that are protected from contact with the transfer media. Many common types of pumps can be designed by submersible pumps manufacturers to be submersible. These include, but are not limited to bladder pumps, bilge and ballast pumps, borehole pumps, booster pumps, centrifugal pumps, condensate pumps, dewatering pumps, fountain pumps, grinder pumps, macerator pumps, micro pumps, sampling pumps, trash pumps, utility pumps and well pumps. Submersible Pumps can be applied to many distinct applications, from pumping large solids or grinding solids to smaller sizes, to transferring wastewater at large flow rates or high pressures, to simply pumping up water off the floor or the bottom of a tank; depending upon submersible pump design. Some of the more common submersible pumps designed for specific applications include water submersible pumps, sewage submersible pumps, 12 volt submersible pumps, sand submersible pumps, irrigation submersible pumps, and solar submersible pumps. Solar submersible pumps, while not specific to an application, are best used for slow and steady water transference into a holding tank, but may also be used for direct pressurization applications.

Type : Vertical, Single/Double/Tripple/Cylinder Air Cooled/Water Cooled, totally enclosed, compression ignition, four stroke cycle, cold starting diesel engine. Combustion System : Direct injection in open type combustion chamber provided in an aluminum alloy piston crown in combination with long stem multihole nozzle, results in low fuel consumption and easy starting. Fuel systems : Fuel is supplied to the fuel pump by gravity feed through an efficient paper element filter, fuel tank capacity 9 liters. Lubrication : Force feed lubrication to main and large end bearing and camshaft bush. Other working parts are splash lubricated. A bypass filter is provided for cleaning the lubrication oil. Lub. oil sump capacity at higher level mark of dipstick. Cooling : Engine cooling can be arranged by a run-through water system of radiator or cooling tank. In air cooled engine, engine is cooled by Breeze of air though streamline cooling.   Rotation : Standard rotation is clockwise looking at the fly wheel, Engine with reverse rotation can also be built against specific requirement. Starting : The engine is designed for staring by hand. Drive : Standard power take-off is from flywheel side. Power take-off from gear end at half-speed can be provided if specially ordered. Standard Equipment : Starting handle, Exhaust silencer, Air cleaner and hand tools.

We are main supplier of this product.

>> TYPE : Vertical, totally enclosed, compression ignition, four stroke cycle, Water cooled / Air cooled, cold starting, diesel engine. >> COMBUSTION SYSTEM : The open type combustion chamber in aluminium alloy piston. In combination with a long stem, multi-hole nozzle assists in low fuel consumption and easy starting. >> FUEL SYSTEM : Fuel is supplied to the fuel pump by gravity feed, through wire mesh filter in the fuel tank and an efficient paper type element filter between tank and pump. An inbuilt filter is also provided in the injecter inlets >> LUBRICATION : Force feed lubrication is provided either by plunger-type pump or by gear type pump to large end bearings & bush type jour bearings. Taper roller bearings need no separate lubrication. All other pa are splash lubricated. Oil is filtered by suction strainer in sump and by throw away type filter element in by pass tilter. >> COOLING : Engine cooling can be arranged by a run-through water system or radiator or cooling tank. In Air cooled engine, engine is cooled by breeze of air through streamline cowling. >> GOVERNING : A sensitive Centrifugal type governer mounted on camshaft gear wheel. Class B1 governing as per I5:11170 and or class A2 governing as per I5:10000 part VIII:l980 is provided. >> ROTATION : Standard rotation is clockwise when looking at the flywheel. >> DRIVE : Standard power take-off is from flywheel side. Power take-off 1 gear end at half-speed can be provided if specially ordered. >> EXHAUST SYSTEM : A standard-type silencer is fitted for adequate silencing. >> AIR CLEANER : Oil bath type air cleaner is fitted for efficient filteration with large silencing. >> STARTING : The engine is designed for starting by hand cranking with starting handle. >> LUBRICATION OIL : SAE-30 or 40 or equivalent. >> FUEL OIL : High speed diesel oil.

Our solar water pump has an excellent dimensional accuracy with high corrosion resistance. We own a substantial storage space that is well-structured and maintained by the professionals. The final packaging and storing of the products is done after complete serialization to avoid last minute hassle. We meticulously pack the entire lot for ensuring safe and secure deliveries across the boundaries.

pump head, Submersible Pump Parts, Turbine Pump Parts, Iron Castings

India Mark 2 Hand Pumps is the largest selling handpump in the word and is used in many countries of the world as the backbone of their community water supply. It is suitable for a depth of upto 50 Meters. The entire above ground components are strong and sturdy. India Mark II Pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.

We are a well-reckoned Diesel Trash Water Pump Manufacturer and Supplier, based in Gujarat (India). The Diesel Trash Water Pump, offered by us, is known for its efficient performance and compact structure. With lower maintenance and energy consumption, the Diesel Trash Water Pump gives longer service life that boosts its growth in the market.

We are Into Offering Superior Quality water Pump Pulley, Which is Used in Water Pump as Well as in Oil Pump. Water Pump Pulley Offered By Us, is Well-acclaimed for Its Durability, Corrosion Resistance, and High Tensile Strength in the Global Market and We have Been Receiving Repeated Orders for the Same. this Product is Mainly Available in Gulf and African Countries. features high Tensile Strengthsuperior Quality high Performancelonger Working Life available In 5", 5.5", 6" in Three Groove ‘b’ Section Please Contact Us.

Water Pump, battery pumps

diesel engine pump, electrical pump sets, Petrol Diesel Engines

Sprinkler Pipe, pvc flat pipes, Submersible pumps, Sprinkler Pipes

Submersible pumps, Centrifugal Monoblock Pumps, Aquaculture Equipment

openwell pump sets, penwell pump sets

Belt Fasteners, submersible mud barrel, Pulley, grease cup, Hose Clamps

Diesel Engine Spares, liner piston set, Agriculture Machine, farm machines

Solar Water Pumping System

Water Cooled Pumpset, Petrol kerosene engines, Multipurpose Engine

diesel engines parts