Adinath International Pasoond, Rajsamand, Rajasthan

  Adinath offers Water for Injection Plant built with AISI SS 316L materials which produces pyrogen free sterile water (Water For Injection) which meets the requirement of Indian, British & United States Pharmacopoeia.   Water for Injection Plant is available in capacity from 80 liters/hour to 3000 liters/hour. The WFI produced by these plants is quite economical due to low maintenance and low operational cost.     Features     100% pyrogen free distilled water conforming to U.S.P./B.P. specifications.   High initial cost but low operational cost.   Saving up to 70% of energy as compared to single column stills.   Low on maintenance as no moving parts except feed pump.   The unit can be operated at a higher steam pressure to get upto 50% higher output.   Automatic dumping of sub-standard distillate.   Low level controls for feed water.   Conductivity meter to continuously monitor the quality of final distillate.

 Features     Stainless steel GMP construction with S.S. 316 contact parts   Fitted with Vibro Motor   Provided lid for dust free operation   Easy to clean and movable machine.   Provided sieve with silicon sealing   Low operating and maintenance cost.   Long screen life.   Easy for assembly & de-assembly for cleaning & change over of screens.   Springs amplify the vibrations leading to reduced motor HP, maintenance & operational cost.   Available in 20" dia, 30" dia, 48" dia., 60" dia size sieve model   Vibro Sifter

    Salient Features     “No Tube - No Filling" system.   Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.   Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.   Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.   All contact parts made of S. S. 16 material.   Relay electrical control system with operating panel with start, stop, and inch.   Variable A.C. drive motor for the speed adjustment.  

“No Tube - No Filling" system.   Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.   Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.   Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.   All contact parts made of S. S. 16 material.   Relay electrical control system with operating panel with start, stop, and inch.   Variable A.C. drive motor for the speed adjustment.

  We manufacturer GMP model single and double rotary tablet press machine with hygienic features. Our Square GMP Model is also called as single and double rotary tablet press machine and is commonly used for slugging big tablets. We specialize in designing 8 station rotary tabletting machine, 10 station rotary tabletting machine, 12 station rotary tabletting machine, 16 station rotary tabletting machine, 27 station rotary tabletting machine and 35 station rotary tabletting machines according to the requirement of pharmaceutical and chemical industries.FeaturesSquare GMP ModelMachine is having C.I. Body & C.I. middle plateEasy and More thorough CleaningPaint free tablet manufacturing zone.Excellent and Operator Friendly Material Feeding SystemLower Guards of Polished Stainless SteelUpper Guards of transparent Acrylic materialElectronic / Digital, Tablet Cum RPM CounterTurret of Special Grade S G IRON castingLower Punch wiper Seal to prevent lower Punch jammingAluminium turret speed 17 to 42 RPMPhosphorous bronze bush provided inside the turret holeImported needle roller bearing provided at the bottom of turretCam tracks & pressure rolls made out alloy steelWorm is made of Phosphorous bronze materialSeparate grinded center pillar of M.S. MaterialUpper punch penetration systemEffective Dust Extraction NozzlesInter Lock Swutcges to all GuardsVariable Speed PulleyOne Shot Lubrication SystemDouble Sided Lifting CamsAnti Vibration ountsOverload Pressure Release SystemReverse direction motion protection is provide to avoid major accident

The Liquid Syrup Manufacturing Plants are ideal tools for the pharmaceutical industry for the production of Oral Liquids. It is specially designed to take care of two critical factors which directly affect the quality of the Liquids. Minimum manual handling of Liquid and effective cleanness during manufacturing. Adinth offers Syrup Manufacturing Plants capacity ranges from 50 Liters to 20,000 Liters.   Sugar Melting Vessel   It is made out of 316 sheet all welding is done by an argon are welded & all Joints are ground to smooth finish. It is mounted on S.S.304 construction legs.   Prefilter   It made out of SS 316 quality fitted inline between Sugar melting vessel and syrup Manufacturing Vessel.   Manufacturing Vessel   It is made out of SS 316 sheet & all welding is done by an argon arc and all joints are ground to smooth finish. It is mounted on S.S.304 construction legs.   Storage Vessel   It is made out of SS 316 sheet & all welding is done by an argon arc and all joints are ground to smooth finish. It is mounted on S.S.304 construction legs   Zero Hold Filter Press   It is made out of SS 316 quality sheet. Complete unit shall be mounted on Portable trolley.   Inline Homoginizer   SS. 316 Inline homogenizer with mounting & motor attached. Inlet & Outlet 25 NB with tri clover fittings   Control Panel   Made out from SS 304Q consisting fuses, voltmeter, terminal, contactor, on/off switches & wiring.

 Features     Each independent filter plenum is provided with filter integrity sample ports.   The equipment’s conveyor belt is monitored and alarm status is activated if it operates outside the belt speed set points.   Provision for ports to allow introduction of validation thermocouples in each zone.   The tunnel is provided with fully integrated ampoule / vial flow control logic to allow automatic stops and restarts of the equipment.   All filter modules have differential pressure gauges to monitor pressure.   Pressure switches with high and low alarms   When the tunnel is not in use it can be operated in night-mode to save energy while preventing contamination. ation Tunnel

Salient Features     Each independent filter plenum is provided with filter integrity sample ports.   The equipment’s conveyor belt is monitored and alarm status is activated if it operates outside the belt speed set points.   Provision for ports to allow introduction of validation thermocouples in each zone.   The tunnel is provided with fully integrated ampoule / vial flow control logic to allow automatic stops and restarts of the equipment.   All filter modules have differential pressure gauges to monitor pressure.   Pressure switches with high and low alarms   When the tunnel is not in use it can be operated in night-mode to save energy while preventing contamination.

          Sterile Preparation Vessel is uses for preparation of injectables uses for human injection medicines. Complete equipments made in Stainless Steel 316L as per cGMP requirements. Vessel designed as per ASME code, cGEP guidelines and cGMP standards.     Salient Features     Complete vessel design as per ASME Code.   Instrumentation & connections comply with BPE & EHEDG guideline.   Vessel design & fittings / Stirrer are designed for CIP / SIP.   Complete aseptic design with Magnetic mixer & high shear Magnetic emulsifier.   Zero dead leg aseptic design Flush bottom outlet diaphragm valve with SIP able.   Sampling valve zero dead leg type with CIP/SIP able.   Volume monitoring by Load Cell.   PH Sensor / Conductivity Sensor provided on demand for online check Product PH & Conductivity.

Description             Sterile Manufacturing Vessel is made as per WHO & USFDA standards to manufacture sterile solutions. This is a completely closed vessel with agitator mounted on top dome. This vessel available with different accessories for different applications i.e. standard stirrer/magnetic stirrer as required by the customers.     Salient Features     Design as per ASME code.   No stagnant point, internal surfaces are 0.28 Ra finish.   All contact parts/surfaces made out of SS 316/SS 316L quality.   Electro polished from inside.   The vessel will be jacketed, insulated and cladded by SS 304 sheet.   Spray ball for CIP/SIP system.   Flush bottom valve.   Steam/Electrical heating.   If required, Load cell/capacitance type level indicator will be provided to measure the volume inside the tank.

Sterile Liquid Filling Machine is made in pleasing matt finished stainless steel materials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel. The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. Features     Suitable for the filling Volume of 2ml to 250ml.   Piston pump/Peristaltic pump aseptic filling.   Filling accuracy of ±0.5% to ±1%.   No cross contamination.   Easy to validate filling system for small/large batch production.   All Contact Parts Made from Stainless Steel 316L & framework by Stainless Steel 304.   Variable A.C. frequency drive for speed adjustment.   Digital Vial Counter for counting production output.   In-feed Turn Table/ Unscrambler for automatic feeding of objects.   On-line Mechanism.   “No Vial - No Filling” System.   “No Vial - Machine Stop” System.   IQ/OQ documentation can be provided.   PLC system with Graphical User Interface. (Optional) Process Operation     The incoming dry vial (sterilized & siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of Stainless Steel 316L construction and both, glass as well as Stainless Steel syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for ''No Vial-No Filling'' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation. Stoppering unit consist of Starwheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by starwheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to starwheel and move in rotary direction along with starwheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded. Then vial further move on conveyor and collected on out feed starwheel for next sealing operation.

This machine is most suitable for counting & packaging of capsules or tablets respectively. The machine design is very unique & extremely functional and equipment is very simple to operate. Feed disc need to be changed to suit the shape & size of product. Feed disc can be order with different numbers & sizes of pockets & can be interchanged quickly.  

  Semi-automatic Capsule Filling Machine gives output of 25,000 to 30,000 capsules per hour and suitable for filling capsules of all sizes with powder, pellets & granules. It is comparable to the best because of its outstanding mechanical & functional features. This innovative design & precision manufacturing meets the requirements of cGMP. Machine is most ideal choice in Semi Automatic Capsule Filling Machine available in the market.  FeaturesCompact GMP modelHigher production output up to 30,000 capsules per hour.Loader gets disengaged automatically after one complete rotation of loading ring.PLC controlled digital display of all operations.Augur with four speeds to fill different type of powder & pellets.Modified design of drug hopper reduces time for dismantling and unloading powder.Auto-drug hopper in-feed mechanisms reduce weight variations & improve productivity.  

Automatic Rotary Vial Washing Machine is specially designed to wash Vial with minimum contact of machine parts with Vials. Machine with specially designed Gripper system holds the Vial from Neck and invert the Vial till the washing operation completed and again after washing release the Vial on outfeed feedworm system in vertical position ensures positive wash of Vials. Machine is suitable to wash 2ml to 100 ml Vials with the help of change parts, Vial feeds through feedworm to infeed Star Wheel and specially designed Gripper hold the Vial from neck and invert the Vial and move it further on rotary moving system for washing process. Features     Complete cGMP model.   Higher production output capacity of 240 Vials per Minute.   All contact parts with the internal surface of Container and the wash media are made from AISI 316L Stainless Steel.   Non contact parts are made from engineering plastic, AISI SS 304 or other FDA approved material.   All finishes, welding joints are processed, treated & equipment selected in accordance with cGMP standards.   Machine provides 3 water washes & 3 Air washes.   Complete flexibility with user for washing cycle.   18 Jets for 6 internal washing zones.   15 Cassette of Grippers each having 2 Grippers.   Suitable for 2ml to 100ml Vials.   Washing sequence can be made as per customer’s requirements.   3 Pumps and 3 Tanks of 25 liters each. (Optional)   Each washing zone with independent circuit to avoid contamination.   Automatic Infeed and Exit of containers.   Machine is equipped with PLC system & printing facility with passwords.   Container unit counter with display in the control panel   Machine can use as a sole machine or inline.   Digital speed indicator for current output Process Operation     Vials feed from the Infeed tray are received on an Infeed Feedworm then moves on Infeed starwheel. The Grippers picks up the Vial from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed Vials are again inverted to neck upward position and feed to output star wheel. Washed Vials received from output starwheel can be collected on Output Tray or can be pushed to tunnel. A separate pumping station (optional) gives the right quantum of water at the desired pressure. In the absent of separate pumping station we can provide the re-circulation & siliconization system on request  

Adinath offer superior quality Rotary Bottle Washing Machines, which are based on Geneva mechanism. This Rotary Bottle Washing Machine is available in sturdy and accurate configuration and offer superior functionality in the pharmaceutical industries. Our bottle washing machines are offered in safe packaging to avoid any damage during the transportation. Apart from the pharmaceuticals, this machine uses in Food, Chemical, Cosmetic & Beverage industry for washing glass bottles. Features     The specially designed cups are provided on the platform to accommodate any size of Bottle from 100 ml to 500 ml.   Easy loading and unloading with two rows.   Individual solenoid valve for each washing sequence.   Pumps and tanks are mounted on parable stand for easy maintenance.   Compact GMP model.   Geneva mechanism.   Four internal, one external and one air wash.   Washing Sequences and positioning of washing stations can be interchanged as required for liquid oral & injectable.   Stationary nozzles eliminate contamination of water cycles.

Rapid Mixer and Granulator designed for optimum performance. cGMP complaint with special attention given to clearing Validation. Rapid Mixer Granulator is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections. Features     Complete GMP model.   All contact parts made from Stainless Steel 316 with Non contact parts made from Stainless Steel 304.   MS structure is fully covered with Stainless Steel 304 covers/claddings.   All contact parts are mirror polished to 220 Grit and external surfaces to matt finish of 180 Grit.   Homogeneous binder distribution.   Short batch time and reduce cleaning time.   Maximize CIP effectiveness.   Air purge sealing system for main stirrer shaft and granulator shaft.   All internal contact parts are polished to the mirror finish.   PLC based operating panel for precise control of process & automation.   A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.   The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.   Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.   All moving parts of the machine are totally enclosed to eliminate accident.   The machine can not be started unless and until the mixer cover is properly closed.   Flush wall type discharge valve eliminates pockets at the port of discharge 

Automatic Prefilled Syringe Filling Machine is suitable for the filling prefilled syringe uses in pharma applications. Machine is compact and provides higher production output. Machine is suitable for application in pharmaceuticals, biotech and Biopharmaceutical industry. Process Operation     Syringes loaded on Stainless Steel in-feed hopper. Prefilled syringe tray can directly loaded on to the machine. Syringes move from infeed station to the filling station filling is done by electronic pump. After desired volume filling syringe transfer on stoppering station stoppering is done on well designed manner. Duly filled & stoppered syringes delivered on outfeed collection tray without hand touch.

Pharmaceutical Powder Mixer is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Features     The conical shape at both ends enables uniform mixing and easy discharge.   All contact parts are made out of Stainless Steel 304 or 316 quality material as required by customer.   Maximum care has been taken to ensure safe operation of the unit.   Manual rotating facility with hand wheel for inching. The same will be provided with Stainless Steel cover & limit switch. (In 200 Kgs. & above model)   Two nos. of safety road will be provided at back side. ( One LH side & one RH side )   Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.   One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.   Cone will be mirror polished from the inside & outside & structure will be matt polished.   All moving parts covered with SS304 covers.   Safety guards made from SS304 pipes provided in front of the m/c with limit switch.   Panel fabricated from SS304 material with facility of three phase indication, D.O.L. starter, digital timer & Amp. Meter.   As per customer requirement machine will be provided with left side drive or with right side drive.   The conical shape at both ends enables uniform mixing and easy discharge.   All contact parts are made out of SS304/316(as per customer requirement) quality material.   Maximum care has been taken to ensure safe operation of the unit.   Worm reduction gear use for speed reduction.   Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.   Inside & outside of the cone will be polished to the mirror finished.   General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.   All safety guards & covers made out of SS304 in GMP Model.   Hand wheel will be provided for manual tilting of cone.   Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

  Description     We are manufacturer of pharmaceutical machinery parts. We manufacture spare parts for any type of pharmaceutical machine whether is mechanical based or electronic based. Our range of parts consists Stainless Steel parts, Mild Steel Parts, Nylon Parts, Aliminium Parts. We manufacture spare parts for below machinery in pharmaceutical industry:   Ampoule Filling Sealing Machine   Ampoule Washing Machine   Ampoule Labelling Machine   Vial Washing Machine   Vial Filling Stoppering Machine   Sterile Powder Filling Machine   Vial Cap Sealing Machine   Vial Labelling Machine   Oral Liquid Filling Machine   Dry Syrup Filling Machine   Auger Powder Filling Machine   Cream Manufacturing Plant   Syrup Preparation Plant   Water for Injection Plant   Capsule Filling Machine   Capsule Inspection Machine   Capsule Polishing Machine   Tablet Dies & Punches   Salient Features     Compact GMP model.   The unit is made compact & versatile as per current norms.   All contact parts made from high quality Stainless Steel 316.   Machine body is elegantly matt finished from Stainless Steel 304.   Slat conveyor belt made from Stainless Steel 304.   “No Syringe - No Filling” system to avoid wastage of costly liquid.   High filling accuracy of ± 1% in single dosing.   Latest design picks up system.   All three operations on one platform, hence less space requirement.

Salient Features     Available in S.S./M.S. model.   Available as per your require speed, length, height & width.   Structure is made of S.S. 304/M.S. 32mm square pipe with matt finish/painted.   Table top is made of S.S.304 16 gauge sheet with matt finish.   Conveyor Belt is supplied with 3 speed pulley.   Special Self-aligning bearing ensure smooth and trouble free rotation of the Roller.   Conveyor belt is used as PVC coated canvas belt/endless rubberized belt.   The Reduction Gear Box provides jerk less & noiseless performance for long time.  

Description     Onion Skin Ampoule Filling Machine built on principle of slant travel of ampoules while filling and sealing, to take care of vide variation of ampoule neck dimensions & thicknesses of available standard ampoules. The Filling unit built on Stainless Steel Square pipe frame and totally encompassed with Stainless Steel coverings, in pleasing matt finish. Further, the large opening available at the bottom side for ease of absolute cleaning. The pendant type electrical control panel is lifted from machine for ease of operation and safety.     Features     Compact model.   All contact parts made from high quality Stainless Steel 316 & other Non-contact parts made from Stainless Steel 304.   “No Ampoule – No Filling” system.   Ampoule neck centering during gas flushing and filling operations.   Possibility of nitrogen gas flushing before, during and after filling.   Full accessibility allows easy maintenance.   Machine equipped with pre-warming station.   Minimum change over time, little maintenance & easy cleaning.

  Octagonal Blender is very effective performing of dry blending, mixing, lubrication and homogenizing of the powder and granules. The material loading and unloading by detachable container for easy and dust free operation. For fast and effective mixing baffles are provided. Hand wheel fitted on gear box for easy positioning and control panel fitted with timer for setting of mixing time. Also fitted with safety around hard with limit switch for safety operation. Available model in capacity 5 ltrs to 8000 ltrs. Features     The octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules, result in good quality.   Simple design requires minimum maintenance.   General structure & safety guards made out of mild steel & coloured in Standard Model and made out of SS 304 & polished to the matt finish in GMP Model.   Maximum care has been taken to ensure safe operation of the unit.   Manual rotating facility with hand wheel for inching.   Bigger size batch at low power consumption   Suitable for dry mixing of products in granule form.   Easy for loading and unloading of material.   Easy for cleaning.   All contact parts are made out of SS 304 / SS 316 or SS 316 L quality material, as per customer requirement. Process Operation     Octagonal Blender is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. The Octagonal Blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.   In Octagonal Blender the granules comes from all sides due to the octagonal shape of the product container, hence requirement of RPM is less. Suitable mainly for Crystalline & Granular type material. This type of material gets sufficient continuous movement due to their shape if container have only slow movement and will results in good quality of blending / lubrication of granules.

Multijet Ampoule & Vial Washing Machine is a simple, compact, versatile and a reliable ampoule & vial Washing machine, with the latest GMP demand. The machine is enclosed in stainless steel construction with flexibility to wash 1ml to 20ml ampoules and 2ml to 100ml glass vials with the help of suitable change parts. The standard unit is having mechanical motorized cam operated valve system for observing total six washing in one cycle. Alternatively timer operated solenoid valve system or microprocessor controlled timer sequences can be in-corporate upon specific customer request. Multijet Ampoule & Vial Washing Machine is widely use in medium & small scale injectable organizations. Salient Features       Positive & pressurized jets through washing needle for pressure cleaning at minimum usages for washing media.     Sound design concept of pressure tank for reverses & continuous supply of washes medias.     Both internal & external washing ensuring absolutely & continuous ampoule / vial after sequential washing.     Acrylic top cover for clear view of washing events taking place in the machine     On-line poly carbonates housing with P.P. replaceable filter cartridge of 5 OR 10 micron of water for best possible washing.     All contact parts of washing media are of S.S.     In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point when cover is pushed down. The dump loading procedure may be used, if ampoules/vials are received in ready to dump boxes, which will have exactly into the same number of ampoule/vial and the pitch, as loading tray. Alternatively, each ampoule/vial has to be arranged into the tray. The loading tray/s is placed directly into the machine & the handle bar is lowered for ampoule/vial for automatic centering of washing needles into the ampoule/vial mouths. The top cover is also lowered & switch is operated for automatic sequent

Production Rate : 30 to 110 Vials/Min.

  Multi Mill is a self contained portable unit useful for high speed granulating, pulverising, mixing, shredding and chopping of wide range of wet and dry materials without special attachments.   As compared to the four common principles of size reduction i.e. grinding, compression, impact and shearing, which often do not produce controlled size reduction, this machine utilizes the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction.   Flow path of material in vertical rotor machine is streamlined. During comminution, material entering the chamber travels to the periphery and passes through the screen tangentially and radially, avoiding chocking and temperature rise.   Features     GMP Model with all contact Parts made of Stainless Steel 316 quality material.   All contact parts can be easily and quickly dismantled and cleaned.   Castores provided for the ease of mobility.   Sieves availble in sizes of 0.5 to 12 mm hole dia.   12 nos. beaters with knife edges,impact edges & 02 nos. scrapper blades.   AC Frequency Drive and Beltless drive & online granulation model available.   Suitable for dry and wet granules.   Process Operation     Multi Mill is designed to utilize the principle of variable force swing beaters having both knife and impact edges rotating within a selected screen to control the particle reduction. Material fed in to the processing chamber moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in to the container kept below the processing chamber.

Rotor Diameter :