Laboratory Equipment Dealers in Azad Nagar, Roorkee (47 products available)

• Size: Standard
• Shape: Round
• Certification: ISI Certified
• Application: Laboratory, Mining
• Color: Brown
• Finishing: Polished

• Type: Apparatus
• Application: Steam Distillation, Water Distillation
• Weight: 10-20kg
• Color: Available in Many Colors
• Voltage: 110V
• Capacity: 20L/Hr
• Power: 0-100W
• Driven Type: Electric
• Warranty: 1 Year

We manufacture, export and supply precision engineered Behaviour of Column and Struts Apparatus. It is laboratory equipment widely acclaimed for its quality, reliability and durability. This apparatus consists of four spring steel columns which are put along a vertical wooden board. These four columns have different end conditions. The conditions are: both ends pinned, both ends fixed, one end pinned and other fixed and one end fixed and other end free. Further, our apparatus is made available with a supporting stand and a set of weights for efficient usage.

We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. Both of our online and offline payment processing methods are secure for transaction offering you a reliable assistance. We thus accept all kinds of cash payments as well as bank transfers.   Features: Two Hinged Arch Apparatus Curved Member Apparatus Unsymmetrical Bending Apparatus Elastically Coupled Beam Apparatus Apparatus for Verification of Clerk’s Elastic Properties of Deflected Beam Apparatus   Behavior of Column And Struts Apparatus : Both Ends Pinned Both Ends Fixed One End Pinned And Other Fixed One End Fixed And Other End Free Three Hinged Arch Apparatus Redundant Joint Apparatus Begg’s Deformeter Set Apparatus Portal Frame Apparatus Maxwell Reciprocal Theorem Apparatus Deflection of Truss Apparatus

As a prominent Manufacturer and Supplier, we bring forth quality range of Automobile Lab Equipment. We offer Automobile Lab Equipment in various grades and specifications as per the industrial standards. We can provide the diffrent kind of Automobile engineering Equipment with their models:- AU01 : Battery ChargerAU02 : Battery HydrometerAU03 : Brake CylinderAU04 : Cam ShaftAU05 : Carburettors Solex Type & Mikuni Type AU06 : Cooling SystemAU07 : Connecting RodAU08 : Crank Shaft AU09 : Demonstration Car Chassis/Educational Car ModelAU10 : Diesel Engine (4 Stroke Single Cylinder)AU11 : Cut Section Model of 4 Stroke 4 cylinder Diesel EngineAU12 : Differential GearDifferential Gear AssemblyDifferential and Rear Axle AssemblyAU13 : DistributorAU14 : Dynamo (Generator)AU15 : Electrical Equipment Board of a Car (Motor Layout car wiring)AU16 : Electrical Fuel PumpAU17 : Fuel InjectorAU18 : Fuel Injector Pump (Diaphragm fuel pump)AU19 : Fuel Supply of a Petrol EngineAU20 : Fuel Supply of a Diesel EngineAU21 : Actual Cut section Model of Fuel Supply System of Four Cylinder Diesel Engine AU22 : Gear BoxAU23 : Gear Box with ClutchAU24 : Sectionized 4/5 Speed Gear Box with Gear Operating Lever (Constant Mesh)AU25 : Gear Box (Synchro Mesh)AU26 : Automatic Gear Box of a Car AU27 : Gear Lubricating PumpAU28 : Hydraulic BrakeAU29 : Model is with Two Brake Drums and a Master CylinderAU30 : Model is with a Master Cylinder and with four Brake Drums AU31 : I.C. InjectorAU32 : Ignition CoilAU33 : Ignition System of AutomobileAU34 : Electronic Ignition System of an AutomobileAU35 : Lubricating SystemAU36 : MagnetoAU37 : Master CylinderAU38 : Mechanical Brake System AU39 : Mechanical Fuel Pump AU40 : Motor Car SteeringAU41 : Piston with RingsAU42 : RadiatorAU43 : Self StarterAU44 : Shock AbsorberAU45 : Spark PlugAU46 : SpeedometerAU47 : Steering Gear UnitAU48 : Rear Suspension SystemAU49 : Front Suspension SystemAU50 : Tractor ModelAU51 : Tractor Differential ModelAU52 : Tractor Steering ModelAU53 : Two Stroke Scooter EngineAU54 : Water PumpAU55 : Clutch ModelAU56 : Scooter CarburettorAU57 : Cut Section Model of 4 Stroke 4 Cylinder Petrol EngineAU58 : Power Brake (Actual Working)AU59 : Air Brake (Actual Working)AU60 : Actual Working Model of Power Steering of a CarAU61 : Cut Section Model of Four Stroke Single Cylinder Petrol Engine AU62 : Disc Brake Actual Working

• Type: California Bearing Ratio Apparatus

• Driven Type: Electric
• Color: Grey, Light White
• Condition: New
• Power: 1-3kw
• Application: Medical Use
• Voltage: 220V
• Type: Medical Equipment
• Warranty: 1yrs
• Country of Origin: India
• Lighting Source: High Bright LED

We offer Plat Load Testing Apparatus, which is extremely acknowledged for its low maintenance, durability and dependability. Dimensional accuracy, sturdy construction and easy operation are some of the salient attributes that make our Plat Load Testing Apparatus highly popular among buyers. We manufacture Plat Load Testing Apparatus using premium raw material that ensures its durability. We are one of the prominent Manufacturers, Exporters and Suppliers of Plat Load Testing Apparatus from Uttarakhand, India.

• Type: Muffle Furnace
• Material: Aluminum
• Certification: CE Certified
• Weight: 100-300kg
• Color: Available in Many Colors
• Application: Heating Process
• Power: 1-3kw

• Type: Soil Testing Equipment
• Certification: GST, MSME, IEC
• Application: SOIL TESTING
• Weight: 10-50kg, 50-10kg
• Color: Grey, DARK GREEN
• Voltage: NONE
• Power: NONE
• Driven Type: Hydraulic, Mechanical
• Warranty: 1year, 2years
• Country of Origin: India
• Brand Name: SASA
• Frame Material: M.S
• Commodity: MECHANICAL
• Color: DARK GREEN, GREY
• Usage: SOIL SURVEY
• Name: SLUMP TEST APPARATUS

• Heat Capacity: 14000 J/K
• Measuring Range: 10

We are chiefly engaged in manufacturing, exporting and supplying Thermal Conductivity Apparatus of the best quality. Our Thermal Conductivity Apparatus is specially designed and developed to measure and display the thermal conductivity of insulating materials. This apparatus uses guarded hot plate method as per guidelines of latest Indian Standards IS-3346 & broadly confirms to British standard ASTM177 as well. This Thermal Conductivity Apparatus is automatic, programmable and designed with latest integrated circuit technology. Further adding, our Thermal Conductivity Apparatus displays the �K� value directly in engineering units without much of expertise and adjustments. Made available in different specifications, our Thermal Conductivity Apparatus is very affordable. Comprises Of Data logger cum differential temperature controllerHigh performance D.C. power suppliesAuxiliary cold plate temperature controllerCold plateGuarded hot plate chamberWindow based software to collect all data and compute K-Value

The Vicat Needle Apparatus instrument is used for determining the normal consistency and setting times of cement and 'A' Class limes.  

It ‘s for the study of shock – motivated brightness discrimination response in small animals, i.e., Rats. Three removable sunmica lined chambers arranged in Y- shape connected to a central chamber. Each arm has a working dimension of approx. 30 x 15 x 15cms., with chamber light, cue light, grill charge indicator, rat presence indicator, removable central dividing door and hinged top. The central portion containing wire – grill. Separate stimulus and control unit with approx. 5 meter long leads. The control unit has a replica of the Y-Maze with facility of indication of the conditions of each chamber. A pre-programmed rotary switch, which controls the experimental procedure, including cue light visual stimulus and shock stimulus, facilitates conduct of an experiment without disturbing the animal. Operates off 220 Volts A.C. only.  

• Material: Iron and Aluminium
• Condition: New
• Application: Laboratory
• Color: Red, White, Blue
• Automation Grade: Manual
• Packaging: Corrugated Box,

Flow through Fluidized Bed, Flow through Packed Bed, Heleshaw Apparatus, Impact of Jet Apparatus, Laminar Flow Apparatus, Apparatus for Study of Laminar and Turbulent Flow in Pipes Apparatus for Measuring Discharge through Weirs.

We are prominently engaged in providing Marshall Test Apparatus to the customers. This Marshall Test Apparatus method covers the measurement of the resistance to plastic flow of cylindrical specimens of Bituminous paying mixtures loaded on the lateral surface by means of the Marshall Apparatus. This Marshall Test Apparatus method is for used with hot mixtures containing asphalt or far and aggregate up to 25mm maximum size. Apparatus : Specimen Mould Assembly : Mould cylinders 4" (100mm) in diameter by 3 (76mm) in height, base plates, and extension collars shall confirm to the code. Three mould cylinders are recommendedSpecimen Extractor : A specimen extractor to remove the compacted specimen from the specimen moulds recommended. A suitable bar is required to transfer load from the extension collar through a circular steel plate (100mm dia x 12mm thick) supporting a steel rod of 25mm)Compaction Hammer : The compaction hammer shall have a flat, circular tamping face and a 103 B (4.5 kgs) sliding weight with a free fall of 18 inch, two compaction hammers are recommendedCompaction Pedestal : The compaction pedestal shall consists of a 8" x 8" wooden post capped with a 12" x 12" x 1" steel plate. The wooden post shall be oak, yellow pine or other wood having a dry weight of 42 to 48 LBS per cuft. The wooden post shall be secured by four angle iron brackets to a solid concrete slab. The steel cap shall be installed properly so that the post is plumb/straight and cap is levelSpecimen Holder : The specimen holder shall consists of a semi circular base and a circular ring to hold the specimen mould in place during compaction of the specimen, the top section shall be flanged to fit over the collar of the specimen mould and shall be provided in the base for mounting on the compaction pedestal. The specimen mould holder shall be mounted on the pedestal steel cap so that the center of the mould is over the postBreaking Head : The breaking head assembly shall consist of upper and lower cylindrical segment or test heads having an inside radius or curvature of 2" accurately machines. The lower segment shall be mounted on a base having two perpendicular guide rods or posts extending upward. Guide sleeves in the upper segment shall be in such a position as to direct the two segments together without appreciable binding or loss of motion on the guide rodsLoading Frame : The loading frame consists of a power operated screw jack mounted in a steel testing frame and shall produce a uniform vertical movement of 2" per minute the upward and downward movements are automatically controlled by Micro Switches. The testing (load) frame is also provided with a hand wheel (crank) for initialing adjustment or for applying loads in case of power failuresProving Ring Assembly : Own Proving Ring of 3000 kg capacity and sensitivity of 10 - 15 between and 2000 kg shall be equipped with micrometer dial. The micrometer shall be graduated in mms (0.002mm) Proving Ring attachments are required for fastening the Proving Ring to the testing frame and transmitting the load to the breaking head, suitable threads are provided in either side of the loading bosses of the Proving Ring for required fixing Miscellaneous Equipments : Oven or Hot Plate : Oven or Hot Bath should be provided for heating aggregate bituminous material specimen moulds, compaction base etc, and other equipments required or mixing and moulding temperatures. It should recommended that the required temperature with 5F controlled so as to maintain the required temperature within 51 (2.8C) suitable shields, baffle plates or sand baths shall be used on the surfaces of the hot plates so minimize localized over-heating or exposure to cool air in winterMixing Apparatus : Mechanical mixing is recommended. Any type of mechanical mixer may be used provided it can be maintained at the required mixing temperature and will produce a well coated, homogeneous mixture of the required amount in the allow-able time. A metal pan or bowl of sufficient capacity and hand mixing may also be used. Generally, specimen is prepared from the mixer of the hot plant or hot mix laid at siteWater Bath : The Water Bath shall be at least 15cm deep and shall be thermostatically controlled so as to maintain the bath at 140-188F (60oC) the tank shall have a perforated bottom or be equipped with a shelf for supporting specimen 5cm above the bottom of the bathContainers for heating bituminous material, either grill type tins, breakers pouring posts, or saucepans may be usedMixing tool-either steel trowel (Garden type) or spatula, for spreading and hand mixingThermometers of determining temperature of aggregates, bitumen and bituminous mixture. Armored glass thermometers or dial type with Metal stem are recommended. A range of 9.9 to 400/500 F (2 to 24oC) with sensitivity of 5F (2.8C) requiredThermometers for Water Bath with a range of 6F to 158F (20 to 70C) sensitive to 0.4F i.e. 0.2oCBalance 5 kg capacity, sensitive to 0.1gm for weighing molded specimensBalance 5 kg capacity, sensitive to 0.1gm for batching mixturesRubber gloves for removing specimens from water bathMarketing pencils for identifying specimensScoop flat bottom for batching aggregatesSpoon (large) for placing mixtures in specimen moulds Test Specimen : Number If Specimen : Prepare at least three specimens for each combination of aggregates and bitumen contentsPreparation Of Aggregates : Dry aggregates to constant weight at 221 to 231 F (105 to 110 C) and prepare the aggregates by dry sieving into the desired size fractions. The following size fractions are recommended 25mm- 20mm, 20mm to 12.5mm, 12.5mm to 4.75mm and passing 2.36mmDetermination Of Mixing : At compacting temperatures. The temperatures to which the asphalt must be heated to produce viscosity's of 85 to 10 sec saybolt favol and 140-15 sec saybolt farol shall be established as the mixing temperature and compaction temperature, respectively the corresponding viscosity's Farol shall be Englar specific viscosities of 25-3 for mixing and 40-5 for compactingPreparation Of Mixtures : Weight into separate pans for each test specimen, the amount to each size fraction required to produce a batch that will result in compact specimen 2.5"-3" in height (about 1200 G) place the pans on the hot plate or in the oven and that to a temperature of approximately 50 (27.8C) above the mixing bowl and with the heated aggregate and dry thoroughly, from a created in the dry blended aggregate and weight the required amount of a bituminous material into the mixture. At this point the temperature of the aggregate and bituminous material shall be within the limits of the mixing temperature established in paragraph below mix the aggregate and bituminous material rapidly until completely coatedCompaction Of Specimen : Thoroughly clean the specimen moiled assembly and the fact of the hot plate to temperature between 200 and 300 F (93.3 and 148.9C) place a piece of filter paper or paper toweling cut to size in the bottom of the mould before the mixtures is introduced. Place the entire batch in the mould space the mixture vigorously with a heated spatula or trowel to a slightly rounded shape. Temperature of the mixture immediately prior to a compaction shall be within the limits of the compacting temperature established a underPlace the collar and mould assembly on the compaction pedestal in the mould hold and unless otherwise specified, supply 50 blows with a compaction hammer with a free fall of 18 inch. Hold the axis of the compaction hammer perpendicular to the base of the mould assembly during compaction. Remove the base plate and collar and reverse the assembly of the mould. Apply the same number of compaction blows to the face of the reversed specimen. After compaction place the sample extractor plate on the end of the specimen. Place assembly with the extension collar down in the testing machine. Apply pressure by the load transfer bar and force the specimen into the extension collar. Lift the collar from the end of the specimen. Carefully transfer the specimen to smooth flat surface and allow it to stand overnight at room temperature. Weight measure and test the specimen. Table fans may be used. Mixtures that lack sufficient cohesion to result in the required cylindrical shape on removal from the mould immediately after compaction may be cooled, until rapidly cohesion has developed to result in the proper cylinder shape Procdure : Bring the specimens to the desired temperature by immersing them in Water Bath and place the lower segment of the Breaking Head and place the complete assembly in position on the testing machine. Place the dial gauge in position over the support and adjust the gauge at zero while holding in firmly against the upper segmentApply load to the specimen by means of the constant rate of movement of the load jack or testing machine head at 2 in per minute head of 2 inch indicated by the dial. Record the maximum reached load decreased as indicated by the dial. Record the maximum load sautéed on the testing machine or converted from the indicated flow. Recovery of test specimen from the Water Bath to the maximum load determination shall not exceed 30 secondsKeep the test sample in the Water Bath for 30 to 40 minutes, keep the samples in temperature at 140-188F for asphalt specimens and 100 to 118 F (37.8C) for tar specimen as in alternative the specimens may be brought to desired temperature by placing in an oven for minimum of 2 hours. Maintain the oven temperature at 140-188 F (60-70C) for asphalt specimen 100-108F (37.81C) for tar specimen. Thoroughly clean the guide rods and the inside surfaces for the test heads, proper to making the test and laborite the guide rods so that the upper test head slides freely over them. Remove the specimen from the water (for repeat test) and place in the breaking need assembly. Three samples (specimens) to be tested for each varying type mixtures Report (Result) : The report shall include the following information for each specimen tested : Weights of the test specimen. Average of three (3) to be takenMaximum load in kgs corrected when requiredFlow value in hundredth of a millimeterMixing temperatureCompacting temperature and testing temperature

The apparatus consist of a metallic frame bearing a freely mocable rod with a cap at top

• Features: Easy to use, Accurate results, Flawlessness

we are offering reynolds apparatus in fluid mechanics laboratory equipments for the used in engineering colleges and institutes...

educational laboratory equipment, Standard Capacitors Box (Type -1100 B)

We are a prominent Manufacturer and Supplier of Laboratory CBR Apparatus in Roorkee. The Laboratory CBR Apparatus which we offer is Hand Operated. The Laboratory CBR Apparatus is made as per the industrial quality standard. To manufacture the Laboratory CBR Apparatus, we use modern machines and latest techniques. Our Laboratory CBR Apparatus finds great application in physical and chemical laboratories. About Laboratory CBR Apparatus : As per I.S. 2720 Part XVI Used for determination laboratory C.B.R.Consists Of :Load frame hand operated capacity 50 Kn (5000 kg)Mould 150 mm internal diameter x 175 mmHigh penetration pistonsCircular metal spacer discAnnular metal weight 2.5 kg Slotted metal weight 2.5 kg. Perforated PlateMetal tripod for dial

Akero Pipe Friction Apparatus

Research Equipment, brass handicraft, Scientific Instruments

Heat Transfer Lab Equipment, Surveying Instruments, Concrete lab instruments

Global Engineering & Technology is is one of the premier organizations involved in manufacturing and supplying of a wide range of Scientific Instruments in India.

Scientific Instruments, Chalk, drawing instruments, plastic stationery items