Testing Equipment Dealers in Adarsh Nagar, Roorkee (58 products available)

• Application: Laboratory Experiment
• Brand Name: SES
• Color: Grey
• Measurement Range: 0-2KGauss to 0-20KGauss
• Model: DGM-HH-01
• Material: Electronics
• Condition: New

• Country of Origin: India
• Grade: Crust tester
• Display Type: Digital
• Voltage: 220 V
• Frequency: 50 Hz
• Material: Mild Steel

• Brand Name: SES
• Application: Laboratory
• Color: Grey
• Usage/Application: Laboratory Experiment
• Model: DGM-103
• Material: Electronics
• Condition: New

• Type: Tensile Strength Tester
• Application: Strength Testing
• Color: Grey
• Voltage: 220V
• Condition: New
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year
• Certification: ISO 9001:2008 Certified
• Weigth: 60-80kg
• Automation Grade: Fully Automatic

• Type: Soil Testing Equipment
• Certification: GST, MSME, IEC
• Application: SOIL TESTING
• Weight: 10-50kg, 50-10kg
• Color: Grey, DARK GREEN
• Voltage: NONE
• Power: NONE
• Driven Type: Hydraulic, Mechanical
• Warranty: 1year, 2years
• Country of Origin: India
• Brand Name: SASA
• Frame Material: M.S
• Commodity: MECHANICAL
• Color: DARK GREEN, GREY
• Usage: SOIL SURVEY
• Name: SLUMP TEST APPARATUS

We are a renowned Manufacturer and Supplier of Ring Crush Tester. The Ring Crush Tester is used to determine the compression strength of a material. With the help of various accessories, the instrument can be used for measuring the compression strength of liner & fluting as well as of corrugated board. The Ring Crush Tester is easy to use. A test piece is placed at the center of the lower platen. When the operators pushes the start button, the lower platen moves upwards according to a preset speed until the test piece is crushed between the upper & lower platens. When this cycle is completed, the lower platen automatically returns to its home position. The maximum measured force exerted during the test is automatically presented on the built in display & value is hold until next Test Start.   Details Model : SGT-G030 You can test from The Ring Crush Tester as RCT, FCT, ECT, CLT, CCT, etc.

We are considered to be one of the reliable manufacturers, exporters and suppliers of the High & Low Test Chamber based in Roorkey, Uttarakhand. This chamber can be cooled using air or water and free from Chlorofluorocarbon better known as CFC. We guarantee that the performance of this chamber meets the required standards set by the industry. The test space capacity of the offered chamber ranges from 50 litres to 8000 litres.

• Brand Name: Quality Engineering Corporation
• Application: Determination of workability of concrete
• Place of Origin: Roorkee
• Features: Required low maintenance, Offer hassle free performance
• Size: Different

We are offering a precision-engineered Slump Test Apparatus to buyers in the domestic market. Our Slump Test Apparatuses are constructed as per ISS-7320. They are used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. They offer hassle free performance and requires low maintenance for a long period of time. We are a well-established Slump Test Apparatus Manufacturer and Supplier from Uttarakhand, India. Buy them from us in various technical grades and at highly affordable prices. Also, we can entertain bulk queries from all over India. Details : The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts. A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base. A graduated tamping rod is used both for compacting the specimen as well as measuring the slump of concrete.

• Resolution: PH0.01pH mV 1mV
• Accuracy: pH+-0.01pH +-1 digit mV+- 1mV+-1digit
• Power Supply: 230 V +/- 10P Hz AC
• Weight: 2000 gms
• Range: pH 0-14pH mV 0to +-1999 mv
• Dimension: 95x215x190 mm
• Slope Correction: 80 to 120% (optional)
• Indication: 4 Digit LED (12.5 mm high)
• Ambient Temp: 10degC to 50degC
• Input Resistance: 1012 Ohms

• Features: High functionality , Simply use, Highly durable.
• Size: 20 x 25 Cm

We offer Plat Load Testing Apparatus, which is extremely acknowledged for its low maintenance, durability and dependability. Dimensional accuracy, sturdy construction and easy operation are some of the salient attributes that make our Plat Load Testing Apparatus highly popular among buyers. We manufacture Plat Load Testing Apparatus using premium raw material that ensures its durability. We are one of the prominent Manufacturers, Exporters and Suppliers of Plat Load Testing Apparatus from Uttarakhand, India.

• Type: Bursting Strength Tester
• Color: Blue
• Voltage: 220V
• Condition: New
• Application: Strength Testing
• Driven Type: Electric, Mechanical, Pneumatic
• Warranty: 1year
• Weigth: 0-20kg
• Automation Grade: Manual

Bursting Strength Tester  For Paper, Paper Board & Corrugated Board (with manual Pneumatic Type). With Single Clamping System  for paper, paperboard and corrugated board with a single equipment.

We are offering digital brusting strngth tester. This instrument is used to test the bursting strength of the materials. The materials that can be tested by using this instrument are paper, paper board, solid fiber board, corrugated boards and boxes. We manufacture this instrument by maintaining standards. These are made according to the specifications of the clients. It is easy to use and user friendly. It provides fast and accurate results when tested. technical specification capacity: 35kg /cm2 opening in upper clamp: 30.5 mm diameter opening in lower clamp: 38.1 mm diameter rate of fluid displacement: 95 cc/ minute test fluid: glycerin gear box: worm reduction type.

Soil Moisture & Temperature Recorder Automatic soil moisture suction & Soil Temperature Reorder is a complete system for monitoring, logging and graphing 7 point Soil moisture & 1 point Soil Temperature readings. Automatically reads the sensors, 12v battery powered monitor, Battery Charging through solar panel, reading frequency from every minute to every day and adjustable to suit you, 8 sensor capacity, includes temperature probe, in-field display of current reading, download the history to a computer through packable data shuttle, monitor current values. Data is saved in Excel format and can be exported.

• Material: MS Steel
• Brand Name: Sapphire
• Country of Origin: Made in India
• Usage/Application: Determination of the consistency of freshly mixed concrete
• Size: 20x10x30 cm

• Range: 50Kg/cm2
• Least Count:: 0.1Kg/cm2

It is measured by giving a hydraulic pressure through a rubber diaphragm on a circular area of the specimen of CBF under test conditions. Force requires to burst or complete rupture of the board is measured through a Digital Indicator. The bursting strength value is expressed in terms of kgscm2. The bursting strength defines the materials quality compare to the others. The value of the bursting strength will give the indication that how much weight may be carried in the box.

• Features: Ruggedness, Perfect finish, Easy to use

• Height: 30cm
• Internal Dimensions: 20 cm
• Steel Rod Dia: 16mm
• Steel Rod Length: 600mm

We are prominently engaged in providing Marshall Test Apparatus to the customers. This Marshall Test Apparatus method covers the measurement of the resistance to plastic flow of cylindrical specimens of Bituminous paying mixtures loaded on the lateral surface by means of the Marshall Apparatus. This Marshall Test Apparatus method is for used with hot mixtures containing asphalt or far and aggregate up to 25mm maximum size. Apparatus : Specimen Mould Assembly : Mould cylinders 4" (100mm) in diameter by 3 (76mm) in height, base plates, and extension collars shall confirm to the code. Three mould cylinders are recommendedSpecimen Extractor : A specimen extractor to remove the compacted specimen from the specimen moulds recommended. A suitable bar is required to transfer load from the extension collar through a circular steel plate (100mm dia x 12mm thick) supporting a steel rod of 25mm)Compaction Hammer : The compaction hammer shall have a flat, circular tamping face and a 103 B (4.5 kgs) sliding weight with a free fall of 18 inch, two compaction hammers are recommendedCompaction Pedestal : The compaction pedestal shall consists of a 8" x 8" wooden post capped with a 12" x 12" x 1" steel plate. The wooden post shall be oak, yellow pine or other wood having a dry weight of 42 to 48 LBS per cuft. The wooden post shall be secured by four angle iron brackets to a solid concrete slab. The steel cap shall be installed properly so that the post is plumb/straight and cap is levelSpecimen Holder : The specimen holder shall consists of a semi circular base and a circular ring to hold the specimen mould in place during compaction of the specimen, the top section shall be flanged to fit over the collar of the specimen mould and shall be provided in the base for mounting on the compaction pedestal. The specimen mould holder shall be mounted on the pedestal steel cap so that the center of the mould is over the postBreaking Head : The breaking head assembly shall consist of upper and lower cylindrical segment or test heads having an inside radius or curvature of 2" accurately machines. The lower segment shall be mounted on a base having two perpendicular guide rods or posts extending upward. Guide sleeves in the upper segment shall be in such a position as to direct the two segments together without appreciable binding or loss of motion on the guide rodsLoading Frame : The loading frame consists of a power operated screw jack mounted in a steel testing frame and shall produce a uniform vertical movement of 2" per minute the upward and downward movements are automatically controlled by Micro Switches. The testing (load) frame is also provided with a hand wheel (crank) for initialing adjustment or for applying loads in case of power failuresProving Ring Assembly : Own Proving Ring of 3000 kg capacity and sensitivity of 10 - 15 between and 2000 kg shall be equipped with micrometer dial. The micrometer shall be graduated in mms (0.002mm) Proving Ring attachments are required for fastening the Proving Ring to the testing frame and transmitting the load to the breaking head, suitable threads are provided in either side of the loading bosses of the Proving Ring for required fixing Miscellaneous Equipments : Oven or Hot Plate : Oven or Hot Bath should be provided for heating aggregate bituminous material specimen moulds, compaction base etc, and other equipments required or mixing and moulding temperatures. It should recommended that the required temperature with 5F controlled so as to maintain the required temperature within 51 (2.8C) suitable shields, baffle plates or sand baths shall be used on the surfaces of the hot plates so minimize localized over-heating or exposure to cool air in winterMixing Apparatus : Mechanical mixing is recommended. Any type of mechanical mixer may be used provided it can be maintained at the required mixing temperature and will produce a well coated, homogeneous mixture of the required amount in the allow-able time. A metal pan or bowl of sufficient capacity and hand mixing may also be used. Generally, specimen is prepared from the mixer of the hot plant or hot mix laid at siteWater Bath : The Water Bath shall be at least 15cm deep and shall be thermostatically controlled so as to maintain the bath at 140-188F (60oC) the tank shall have a perforated bottom or be equipped with a shelf for supporting specimen 5cm above the bottom of the bathContainers for heating bituminous material, either grill type tins, breakers pouring posts, or saucepans may be usedMixing tool-either steel trowel (Garden type) or spatula, for spreading and hand mixingThermometers of determining temperature of aggregates, bitumen and bituminous mixture. Armored glass thermometers or dial type with Metal stem are recommended. A range of 9.9 to 400/500 F (2 to 24oC) with sensitivity of 5F (2.8C) requiredThermometers for Water Bath with a range of 6F to 158F (20 to 70C) sensitive to 0.4F i.e. 0.2oCBalance 5 kg capacity, sensitive to 0.1gm for weighing molded specimensBalance 5 kg capacity, sensitive to 0.1gm for batching mixturesRubber gloves for removing specimens from water bathMarketing pencils for identifying specimensScoop flat bottom for batching aggregatesSpoon (large) for placing mixtures in specimen moulds Test Specimen : Number If Specimen : Prepare at least three specimens for each combination of aggregates and bitumen contentsPreparation Of Aggregates : Dry aggregates to constant weight at 221 to 231 F (105 to 110 C) and prepare the aggregates by dry sieving into the desired size fractions. The following size fractions are recommended 25mm- 20mm, 20mm to 12.5mm, 12.5mm to 4.75mm and passing 2.36mmDetermination Of Mixing : At compacting temperatures. The temperatures to which the asphalt must be heated to produce viscosity's of 85 to 10 sec saybolt favol and 140-15 sec saybolt farol shall be established as the mixing temperature and compaction temperature, respectively the corresponding viscosity's Farol shall be Englar specific viscosities of 25-3 for mixing and 40-5 for compactingPreparation Of Mixtures : Weight into separate pans for each test specimen, the amount to each size fraction required to produce a batch that will result in compact specimen 2.5"-3" in height (about 1200 G) place the pans on the hot plate or in the oven and that to a temperature of approximately 50 (27.8C) above the mixing bowl and with the heated aggregate and dry thoroughly, from a created in the dry blended aggregate and weight the required amount of a bituminous material into the mixture. At this point the temperature of the aggregate and bituminous material shall be within the limits of the mixing temperature established in paragraph below mix the aggregate and bituminous material rapidly until completely coatedCompaction Of Specimen : Thoroughly clean the specimen moiled assembly and the fact of the hot plate to temperature between 200 and 300 F (93.3 and 148.9C) place a piece of filter paper or paper toweling cut to size in the bottom of the mould before the mixtures is introduced. Place the entire batch in the mould space the mixture vigorously with a heated spatula or trowel to a slightly rounded shape. Temperature of the mixture immediately prior to a compaction shall be within the limits of the compacting temperature established a underPlace the collar and mould assembly on the compaction pedestal in the mould hold and unless otherwise specified, supply 50 blows with a compaction hammer with a free fall of 18 inch. Hold the axis of the compaction hammer perpendicular to the base of the mould assembly during compaction. Remove the base plate and collar and reverse the assembly of the mould. Apply the same number of compaction blows to the face of the reversed specimen. After compaction place the sample extractor plate on the end of the specimen. Place assembly with the extension collar down in the testing machine. Apply pressure by the load transfer bar and force the specimen into the extension collar. Lift the collar from the end of the specimen. Carefully transfer the specimen to smooth flat surface and allow it to stand overnight at room temperature. Weight measure and test the specimen. Table fans may be used. Mixtures that lack sufficient cohesion to result in the required cylindrical shape on removal from the mould immediately after compaction may be cooled, until rapidly cohesion has developed to result in the proper cylinder shape Procdure : Bring the specimens to the desired temperature by immersing them in Water Bath and place the lower segment of the Breaking Head and place the complete assembly in position on the testing machine. Place the dial gauge in position over the support and adjust the gauge at zero while holding in firmly against the upper segmentApply load to the specimen by means of the constant rate of movement of the load jack or testing machine head at 2 in per minute head of 2 inch indicated by the dial. Record the maximum reached load decreased as indicated by the dial. Record the maximum load sautéed on the testing machine or converted from the indicated flow. Recovery of test specimen from the Water Bath to the maximum load determination shall not exceed 30 secondsKeep the test sample in the Water Bath for 30 to 40 minutes, keep the samples in temperature at 140-188F for asphalt specimens and 100 to 118 F (37.8C) for tar specimen as in alternative the specimens may be brought to desired temperature by placing in an oven for minimum of 2 hours. Maintain the oven temperature at 140-188 F (60-70C) for asphalt specimen 100-108F (37.81C) for tar specimen. Thoroughly clean the guide rods and the inside surfaces for the test heads, proper to making the test and laborite the guide rods so that the upper test head slides freely over them. Remove the specimen from the water (for repeat test) and place in the breaking need assembly. Three samples (specimens) to be tested for each varying type mixtures Report (Result) : The report shall include the following information for each specimen tested : Weights of the test specimen. Average of three (3) to be takenMaximum load in kgs corrected when requiredFlow value in hundredth of a millimeterMixing temperatureCompacting temperature and testing temperature

We are one of the reliable Suppliers of Conductivity Meter, based in Roorkee, Uttarakhand. Based on advanced technology, Conductivity Meter offers accurate and precise measurement of electrical conductivity in water and other fluids. Conductivity Meter is available in different specifications to cater diverse demands of the clients.   Main Features : The portable conductivity meter provides fast, accurate readings, with digital readability and the convenience of a remote probe separately. Multi-measuring ranges : 199.9 uS, 1.999 mS, 19.99 mS. Data hold functions for stored the desired value on display. Large LCD display for low power consumption & clear read-out even in bright ambient light condition. Used the durable, long-lasting components, including a strong, lightweight ABS-plastic housing case

AMC of Environmrntal Chamber, Insttallation & Commissioning

Digital Gauss Meter, Standard Capacitors Box (Type -1100 B)

We offer digital multi meter.

pulp testing instruments, Paper Testing Instruments, Gsm Scale

Soil Testing Equipment, geographical instrument, scientific instrument

Dust Chamber, Altitude Chamber, Ozone Chamber, Bump / Shock Test Machine

ph conductivity tester, water level measuring tape, pocket altimeter