Syringe Destroyer Dealers in Solan (2 products available)

We are offering needle burner & syringe destroyer. Advantages:  esteem needle burner syringe destroyer is compact device that fits easily on the desktop.  estn-101estem needle burner syringe destroyer is portable, safe and cost effective system which creates a safe environment for mankind.  after use, the contaminated syringe with needle is inserted in the destroyer which generates a high temperature above 1600 degrees centigrade, thereby completely burning the needle and reducing it to ashes in just 2 seconds.  pulling the cutter handle, cuts off the syringe hub and makes it unusable, which in turn eliminates chances of reusing the same  very high grade imported steel cutter is used which does not rust or becomes blunt even after long usage.  removable discharge tray for easy disposal of needle ash and syringe hubs.  shock proof, fuse protection and negligible power consumption as compared to conventional models, thus saving on power and money.  safeguards you against accidental needle prick injuries, since it eliminates need for recapping because the needles are burnt. table: 1. Size 175mm x 120m x 120mm handy desktop model. 2. Weight 1.7 kg 3. Power 220 voltage ±10%, 50 hertz, and single phase. 4. Protection 26 ampere cartridge fuse. technical specification: 1. Principal of operation: electro - melting type. 2. Housing encloser: it will be moulded type and shock proof and made of following material such as abs plasticsglass filled nylon. Suitable sliding tray made of the same material as that of the enclosure housing with provision of aluminumss material of thickness 0.8 mm (minimum) on the sidewalls as well at the bottom of the tray shall be provided for collection of residue and destroyed syringe tips. Suitable provision to burn the needle and to cut the syringe tips shall be provided in the unit. Note: it shall comply in general to the requirements of is:302 (part-1)1979 to ensure safe and reliable operation in normal use. 3. Manual cutter: it shall have suitably hardened blade of anti-corrosive ss material to be declared by the tenderers. 4. Capacity: the unit shall have adequate capacity to destroy all kinds and following sizes of injection needles: (a) dia. Ranging from 0.4 mm to 1.6 mm (26 swg to 14 swg)with length 12.5 mm to 80.0 mm (for model of 100w rating) (b) dia. Ranging from 0.4 mm to 1.0 mm (26 swg to 18 swg)dia with length 12.5 mm to 80.0 mm (for model of 60w rating) 5. Power "onoff" switch shall be provided along with power "on" indicator. The unit shall be provided with fuse of adequate rating. The item quoted shall be provided with power cord of 3m length and an earthing point. 6. (a). For model rated 100 watts: power requirement: at rated voltage 230v, 50 hz a.c. Supply. Tenderer shall declare the power consumption and destruction time for complete destruction for needle of 1.6 mm dia & length 80 mm of item quoted and the quantity (nos)of this size that can be destroyed in continuous operation of 5 minutes. (b). Model rated 60 watts: at rated voltage 230 v, 50 hz a.c. Supply.