Epoxy Coatings Dealers in Nanpura, Surat (8 products available)

Clients can avail from us premium Performance Protective Coatings available under the brand name Multi Crete. Performance Protective Coating (MULTI CREATE) is a two component hydraulic binder based product which is very effective for solving sealing problems on porous substrates. Performance Protective Coating is composed of a "Powder" consisting of hydraulic binder, chemical inert aggregates and waterproofing additives as one part and Resin Emulsion as the second part. The two components are mixed together to obtain a plasticized cement rendering. Once applied, Performance Protective Coatings constitute perfectly leak tight coating resistant to strong water pressure. Performance Protective Coatings work even against the normal negative pressure. The cured coating has the appearance of white, slightly rough rendering. Benefits Reacts in contact with water by crystallization.Bonds strongly to most of the building materials.Can be applied on a damp substrate.Forms micro porous coating which allows breathing of the substrate.Can be applied both indoor-outdoors, horizontal vertical surfaces in uniform thickness. Unaffected by UV light.Does not corrode reinforcing steel.Resists high positive water pressure and normal negative water pressure. Acts by perfectly plugging pores in concrete and masonry. Highly durable even in continuous contact with water. Resistant to water, dilute acid and alkali solutions.Non - dangerous and odorless.Resistant to fungus and microrganism growth. End Uses MULTICRETE is used as a protective performing coating in building - terraces, toilets & bathroom basements. It also acts as protection against corrosion and salt. It is used for sealing under positive water pressures in water reservoirs, water tanks, built up pits of all kinds, agricultural silos, swimming pools, sea water pools etc. Direction For Use Surface Preparation: Surface preparation is very important to get the best results and to avoid failure. The substrate must be clean and free of dirt, grease, sludge, fungus, cement coating blistered and loose plaster etc. Moisture is necessary for the effectiveness of MULTICRETE, therefore the substrate must be dampened with water, However, streaming water must be diverted by creating drains.Do not apply in rain. Before application of MULTI CRETE, seal the crack with any suitable sealant.Sealer / Primer Coat The concrete or cementitious substrates are highly porous. It is necessary to make the substrate less absorptive so that the top coats film thickness remains same. Krishna SEALER is highly elastomeric acrylic emulsion polymer without filled system has extra ordinary penetrating power which seals the porosity. Microcrevices of the substrate. It provides strong adhesion to the substrate and top coating. Due to non-filled system it overcomes the problem of linear stress and strain created in the substrate. Apply one coat of SEALER as a primer coat by brush. Apply the topcoat after one hour but within four hours of drying of SEALER coat. MixingAdd the powder (part 1) in to the liquid (part II) and mix manually until a homogenous semi - liquid without lumps, is obtained. The consistency of the mixture should be enable to give a good and smooth application by brush. ApplicationApply the first coat of MULTICRETE generously in order to plug the pores and shrinkage cavities. Within 24 hours, dampen the surface and then apply the second coat. Apply a third coat in the same way, if necessary. Moisten or wet the surface frequently for three to four days. Cleaning : Tools and equipments to be cleaned with water. Storage & Shelf Life : Store in cool dry place. Shelf life of the unmixed material is one year from the date of manufacture. Packing : 10, 20, 70 kgs duel packs. Precaution Do not apply over hot or dry substrate.Do not apply in rain.

Water Dilutable Expoxy Coating(Hydracrete -ACR) HYDRACRETE -ACR:Is a acrylic emulsion polymer based additive/modifier for cement (portland) based waterproofing and structural protective coating composition. It modifies / enhances the properties of cement such as bonding, impact, flexural and cohesive strength. Similarly it improves the toughness, abrasion, wear and water resistance of cement in plaster and concrete. Eventhough it makes the concrete/plaster waterproof. It retains the water vapour diffusion of the substrate. All these functions make HYDRACRETE - ACR unique and versatile cement compatible polymer so that it can be safely used for structural repairs and rehabilitation jobs. Benefits Easy to use. Cement compatible in all proportions. Bonds strongly to almost all building materials. Resists hydrostatic water pressure and remains unaffected in continuous contact with water. Weather durable - resist UV rays, dilute alkaline and acidic solutions and prevents substrate from erosion and corrosion. Non toxic, nonhazardous-when exposed to fire does not generate toxic fumes. Alllows trapped water vapour to excape and prevents blistering and peeling off problems.

• Packaging Type: Box
• Color: Transparent
• Usage/Application: Car Ceramic Coating

If you want a long-lasting investment for your car, this is something to consider. Paint coatings resist dirt and dust better than traditional protection, so your vehicle will stay cleaner for longer periods of time. Your paint will be extremely easy to wash because dirt wipes away easily – no scrubbing is required if you properly maintain your vehicle. We have available all types of Teflon coating , ceramic coating, glass coating n paint protection treatment for all color cars for all automobile car brands

mdf panels wood coating, WOOD VARNISH, pre coated plywood, Paint

portable sand blasting machines, Devcon Titanium Putty, Flexco Belt Conveyors

nano glass coating, Intensive Interior Cleaning

Interior Wood Coating