Laboratory Bath Dealers in Thane (62 products available)

• Display Resolution: 0.1?
• The longest time set: 99h 59min
• Temperature Range: RT+5?
• Time for temp. increasing: ≤25minutes(from 20? to 100? )
• Time for temp. decreasing: -
• Temperature Accuracy: ≤±0.5?
• Uniformity : ≤±0.5?
• The Max Temperature: 105?
• Temperature-Segment: -
• Maximum Power: 150W

Designed as per ASTM D-445 IP-71 and ISO-3104 standards, our Low Temperature Kinematic Viscosity Bath has high accuracy and showcases reliable performance. We are distinguished Manufacturer, Supplier and Exporter of Low Temperature Kinematic Viscosity Bath in Maharashtra, India. It has built in stirrer with double walled glass window at front and back sides and fluorescent tube for illumination. Single  and cascade refrigeration systems are used to get low temperature, digital temperature controller is microprocessor based with an accuracy of ± 0.2°C and 0.03º C.

• Type: Ultrasonic Bath
• Application: Lab Use
• Feature: Easy To Operate
• Voltage: 110-220 V
• Condition: New
• Driven Type: Electric
• Tank Capacity: 0-50 Ltrs
• Stainless Steel: Stainless Steel
• Automation Grade: Semi-automatic

In this section most of the routinely required items like Stirrers, Shakers, Shaker incubators, Ultrasonic Cleaning Baths, Precision Water Baths. Although these are commonly used items, you will find some uncommon features in some of them. And there are some products like Mini Cooling System, which are unique and purely a speciality of Spectralab. Ultrasonic Cleaners transform low frequency AC current into high frequency sound waves via pizo electric transducers. Whenever high intensity ultrasound is applied to a solution, which in turn causes cavitation and the formation and violent collapse of minute vaccum bubbles in the solution. In a very short time, it removes the entire dirt from all components, which are immersed in the cleaning solution. Ultrasonic Bath is specially used for precious cleaning of small parts that contain contamination in some hard to reach corners.

• Brand Name: Labtop
• Type: Magnetic Stirrer
• white: green
• Place Of Origin: Mumbai
• Temprature: Upto 550 c

We are offering magnetic stirrer with hot plate. * temperature up to 550*c * brushless dc motor * ceramic plate * led display.

• Brand Name: SA Instruments - Water Bath
• Power: To work on 220/230 Volts A.C. supply.
• Model Number: SA - WB
• Classification: Water Bath Rectangular
• Place of Origin: India
• Usage: medical institutions, research laboratories, agricultural institutions, bio-chemical industries
• Item: Stainlesss Steel

The electrically operated Single walled Rectangular Water Bath are made of thick stainless steel and feature constant water levels maintained inside them. For optimum performance, these also come complete with concentric rings having 75 mm dia, wire plugs and with suitable drainage facility. The bath machine also comprises thermostatic controller that allows better control of temperature levels with removable glass tray and stainless steel platform for drying of sections. Some of the applications these are used in include for sterilizing purposes. These Water Baths also come fitted with heating element for uniform heating throughout the system and finds usage in areas like medical institutions, research laboratories, agricultural institutions, bio-chemical industries as well as in many other industries. Application: * Water Bath Rectangular Single Walled is made of Heavy Gauge Stainless Steel with Concentric rings. * Water Bath Rectangular Single Walled fitted with Heating Element for uniform heating throughout. * To work on 220/230 Volts A.C. supply. * In medical institution and research laboratories. * Agricultural institution. * Bio-Chemical industries and many other industries.

• Condition: New
• Temperature Stability: +- 2 Degree C
• Material: Metal
• Desired Temperature From: 5 - 20°c
• Power Source: Electric
• Finish: Polished

Product Description : We have emerged as a dependable Manufacturer, Supplier of  Ultrasonic Sonicator Bath With Chiller in Mumbai , India . The Ultrasonic Sonicator Bath with Chiller, offered by us, is available in various grades and specifications as per the customer requirement. Ultrasonic Sonicator Bath With Cooling uses hi-tech Ultrasonic technology during the degassing at laboratory & R & D Lab . The Ultrasonic Sonication Bath with Chiller is used in pharma industries. Sonicator generates heat which may be harmful to some applications. Controlling temperature by adding ice chips and repeatedly changing water is no longer necessary. LeelaSonic Degassing Ultrasonic Bath Sonicator Bath with Chiller maintain the bath temp. 5 Deg. C & keep sample cool. Simply set the chiller to a desired temperature from 5 - 20°C and cold / chilled water will be re-circulate in the Ultrasonic Bath and it will keep the Ultrasonic Bath temp. cool / chilled with the help of chiller.   Features of Ultrasonic Sonicator Bath With Chiller : Powerful chiller to keep the samples cool / chilled. Dessolve , disperse & emulsify samples. Degassing the Sample Solution . Application Laboratory Sonicator , Scientific Sonicator , Ultrasonic Sonicator Bath . Micro Controller base Digital Timer & Digital Temp. Controller. With latest MOSFET base technology.

We are one of the reliable Manufacturers, Suppliers of Ultrasonic Sonicator Bath. Sonicator Bath has been designed using MOSFET/IGBT and latest Microcontroller base technology. Ultrasonic Bath is used to fulfill all cleaning needs of the labs. Ultrasonic Sonicator Bath is used in QC, R&D and analytical labs, scientific and pharmaceutical labs. The use of Ultrasonic Sonicator Bath offers gentle yet effective cleaning action ensuring that no contaminants are left from the previous process. Our professionals have achieved dexterity in manufacturing higher capacity degassing sonication Bath. Further we provide customized production facility for our customers.  Features : » Operating frequency 33 ±3 KHz, for all general purpose cleaning, is highly        recommended. Frequency of 50 KHz is also available» Input voltage range of 170V AC - 270V AC, 50 Hz, l Ph.    Diaphragm» Micro controller based timer range 0 to 15 minutes up to 3.5 litres. 30/99 min.    timer are    also available. » Thermostatic heating» Digital Temperature Controller (optional) if required

Double walled in construction. Inner chamber and lid made of Stainless Steel. Outer chamber made of Mild steel with powder coating Glass window is on the front for both sides clear observations while immersion test. The gap between the chambers filled with high grade glass wool to minimize the heat loss. Temperature range from ambient to 100oC and temperature controlled by digital temp. Indicator cum controller with an accuracy of + 0.5oC. A high speed stirrer with a motor of 120 HP is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber. The heating mechanism comprises of set of heaters pertaining to fast heating to operate 230 volts AC only. Designed for immersion equipments and for external circulation to maintain constant temperature. To operated 230 Volts AC only.

Dry bath incubator or dry block heater is a class I medical device, which is used to provide controlled dry heating environment for test tubes containing in Vitro diagnostic specimens or samples for qualitative or quantitative procedure in clinical laboratories. Dry block heater plays a vital role in incubation and activation of cultures, enzyme reactions, coagulation studies, enzyme reactions, inactivation of sera, restriction digests, Polymerase Chain Reactions.  

• Type: Water Bath
• Material: Carbon Steel, Mild Steel, Stainless Steel, Steel
• Shape: Rectangular, Square
• Application: Bath
• Color: Grey, Silver
• Voltage: 220V
• Condition: New, Used
• Driven Type: Electric
• Warranty: 1year

We are the main supplier of this product.

• Temperature: 150°C (302°F)

Koehler KV5000 series kinematic viscosity baths with the optical flow detection system provides automatic viscosity measurements of petroleum and petrochemical products. Includes communication and power ports for each optical detection assembly, and can utilize up to five optical assemblies. Two additional positions are available for manual viscosity measurements, and all positions can be used in the manual mode. The interchangeable Ubbelohde, Cannon®Fenske, and Reverse Flow viscometer tubes are quickly installed and removed from the detection assemblies for cleaning and simple tube changes. Allows automatic viscosity measurements and results calculation without an external PC. Motorized stirrer provides complete circulation without turbulence. Microprocessor PID circuitry assures precise, reliable temperature control within ASTM specified tolerances throughout the operating range. Simple push-button controls and dual digital displays permit easy setting and monitoring of temperature. Two place calibration offset capability is provided. Built-in cooling coil facilitates temperature control at ambient or below ambient temperatures.

• temperature: 150°C (302°F)

Constant temperature bath series with advanced temperature control circuitry and integrated timing features for convenient, accurate glass capillary viscometry determinations. Microprocessor PID circuitry assures precise, reliable temperature control within ASTM specified tolerances throughout the operating range of the bath. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature. Two place calibration offset capability is provided. Baths accommodate seven glass capillary viscometers of various types - see pages 10-13 for complete selection. Viewing the viscometers is made easy by glare-free fluorescent illumination inside the bath and a baffle that provides a background for easy viewing.

• Material: Mild Steel
• Voltage: 210 V
• Automation Grade: Manual

These bath are combination of high heat transfer with excellent in heat capacity & uniformity of behavior. Double walled in construction with inner of heavy gauge S.S. & exterior of G.I. sheet finished in epoxy powder coated shade. Available in construction with inner & exterior with heavy gauge S.S. matt finished in GMP model. High grade glasswool insulation in between the walls to minimize the heat loss. Heating is by immersion heaters. Temperature controlled by Energy Regulator Control or Electronic Digital Temperature Controller cum indicator. Temperature Range : 50°C to 300°C. Working on 230 volts, single phase, 50 Hz.

Our company’s name figures in the list of trusted Manufacturers, Suppliers and Exporters of Plasma Thawing Baths from India. The Plasma Thawing Bath offered by us is a tabletop model for quick thawing of plasma at 37 degrees. Plasma Thawing Bath offered by us has a smooth acrylic tray for accommodating Plasma bags. The outer chamber of the Plasma Thawing Bath is of mild steel duly powder coated.   Details Foamed in place PUF insulation improves temperature stability and energy efficiency Inner chamber is made of SS304 There is an audiovisual alarm if the temperature deviates from preset temperature along with display of set value and process value It has an integrated pump for internal circulation and it maintains precise temperature uniformity throughout the liquid medium

LABTOP Micro controller based Plasma Thawing Bath is a tabletop model, for quick thawing of plasma at 37.0 °C. Temperature is controlled by micro controller based temperature controller.Special Features• Audiovisual alarm if temperature deviates from preset temperature.• Display of Set value & Process value.• Smooth acrylic tray for accommodating Plasma Bags. • Integrated pump for internal circulation maintains precise. Temperature uniformity throughout the liquid medium.• Rounded corners for better water circulation and uniformity.• Foamed - in place PUF insulation improves temperature stability and energy efficiency.• 316 stainless steel constructions resist chemicals.• Calibration & Validation.     CRYOPRECIPITATE BATH Advanced LABTOP Cryo Bath offer a combination of contemporary cabinet design, advanced micro - controller and a range of accessories to suit your specific laboratory or process application. High-strength cabinet constructions with 316 stainless steel interior tanks withstand the most critical applications in demanding laboratory environments. The unit is mounted on castor wheels for ease of mobility.The LABTOP Model LCB-15 Cryoprecipitate Bath is designed to safely and reliably thaw fresh frozen plasma (FFP) for the recovery of cryoprecipiated anti hemophilic factor (AHF).Specially designed trays to ensure safety of Plasma Bags. Thawing temperature is preset at 4 °C and maintained with ±0.2 °C stability. 

• Brand Name: Bioline
• Voltage: 230V AC
• Chamber Volume Litre: 12L
• Heating Power: 1250W
• Protection Fuse: 10A
• Temperature Accuracy: +/-0.2 deg C

Micro controlling Plasma Thawing Bath is a tabletop model for quick thawing of plasma at 37 degree. There is an audiovisual alarm if the temperature deviates from preset temperature along with display of set value and process value. It has a smooth acrylic tray for accommodating plasma bags. Thawing Bath which we manufacture has integrated pump for internal circulation and it maintains precise temperature uniformity throughout the liquid medium. Foamed in place PUF insulation improves temperature stability and energy efficiency. The outer chamber is of mild steel duly powder coated. Inner chamber is made of SS304. One of the leading Blood Bank Thawing Bath Exporters and Suppliers in India we make quality our prime concern and customer our main focus.

• Brand Name: Labman
• Color: Refer Image
• Weight: 5 kg
• Country of Origin: Made in India
• Model Name/Number: LMMS-5LC
• Capacity: 5000 ml
• Speed Range: Upto 1600 rpm
• Size: 300 x 190 x 126 mm

• Material: Stainless Steel
• Voltage: 220 V
• Display: Digital
• Automation Type: Automatic
• Ultrasonic Power: 180 W

We are offering lab water bath. we are engaged in providing lab water bath to our valuable clients. Our laboratory water bath is provided as per the needs of the customers. Used for laboratory and research work, the lab water bath is high on demand in the market. Our lab water bath can be availed at pocket friendly prices from us. why our lab water bath? flawless makehigh functionalitydurable and reliableeconomical used for washing, sterilizing & drying of objects and laboratory glassware

• Brand Name: IKA
• Weight: 0.22 kg
• Voltage: 100-240 V
• Material: Polyester
• Model Name/Number: Mini MR standard
• Capacity: 1 L
• Temperature Range: 5 - 40 Deg C
• Frequency: 50/60 Hz
• Speed Range [Rpm: 0 - 2500 rpm
• Dimensions: 115 x 37 x 129 mm
• Set-Up Plate Dimensions: 115 x 115 mm

• Brand Name: VELP Scientifica
• Power: 115 V
• Type of Hotplate: Hotplates
• Plate Material: Aluminum Alloy
• Plate Dimensions: 155 mm
• Control Type: Analog
• Unit Dimension: 340 x 90 x 246 mm

Features High Temp.oil Bath Excellent control performance SS.316 Inner & Outer Body Header Isolated from oil Temperature Range +300° (Locked) PID Temperature Control Timer 1min to 9999h Sensor Resolution 0.1°c Sensor pt-100 Immersed in oil Selector Switch: Temp.Control + Heater (off) Temp. Indicator Low Maintenance.

Confirms to specifications as per ASTM D-445 & 446, IP-71 standards. Double walled constructions, outer body made of heavy gauge mild steel, painted with powder coated paint, inside made of stainless steel. Glass wool insulation will be provided to prevent heat loss. Leak proof argon arc welded & fine finished joints. Toughened glass windows will be fitted on front and rear sides of the bath. In-built light arrangement will be provided. A stirrer provided for turbulence free agitation & uniform temperature throughout the bath. Temperature will be controlled by digital temperature controller cum indicator and PT-100 sensor.

• Color: Silver, Grey, Black
• Automation Grade: Semi-Automatic, Fully Automatic, Manually Automatic
• Driven Type: Electric
• Type: Extraction Mantle
• Capacity: 250-500 ml, 500-1000 ml
• Voltage: 110V, 220V, 280V
• Material: Stainless Steel, Mild steel, Metal
• Warranty: 1 Year, 2 Year
• Application: Laboratory

Committed to quality, we have established ourselves as a prominent name for Dry Bath Incubator. The Dry Bath Incubator is designed for performing experiments and studies. Dry Bath Incubator, which we offer, is greatly demanded for its precise construction, efficient performance, and longer service life. Features : Precise Micro Controller Temp. range from -5oC to 100oC LCD display Programmable Temperature & Time User Calibration

• Material: Stainless Steel
• Capacity: 500-1000 L
• Finish: Polished
• Max Design Pressure: 0-10 bar