george engineering Chalakudy, Thrissur, Kerala

  • VIBROFORMING TABLE

    VIBROFORMING TABLE

    Request for Price

    In this process high slump concrete(highly flowing concrete) is poured in to the rubber moulds and compacted in vibro forming vibrating tables. The moulds with green concrete are kept for initial strength gaining for 8-12 hours over flat plate. Then the cast concrete tiles are stripped out from the rubber moulds. This wet tiles are then kept in controlled atmosphere for 3 days for further strength gaining. Polyurethane or varnish coatings can be applied for added attractiveness & wear resistance.  

    ...more
    Get Best Price
  • paste mixer

    paste mixer

    Request for Price

    50-100kg mixing pan - with 2hp motor, 750 dia x 350mm height, bottom plate 16mm, side plate 10mm with extra ring 10 mm inserted to bottom section and all blade manufactured with hardened steel plates including gear box

    ...more
    Get Best Price
  • PAN MIXER WITH HYDRAULIC HOPPER

    PAN MIXER WITH HYDRAULIC HOPPER

    Request for Price

    Pan mixers are specially designed, study in construction and easy for maintenance to mix Flyash, Lime, Gypsum, Cement, Sand and Coarse aggregates. The concrete mixed in pan mixer improves the finish and strength due to attrition exerted by the pressure of the CI rollers. The quality of mixing is ensured by inner and outer scrappers and CI rollers. The roller pressure can be adjusted by compressed springs to suit different coarse & fine aggregate sizes. Best quality and tested raw materials are used and hence long life is ensured even at high working rate. Mix - Max pan mixers mixes concrete at very low water - cement ratio suitable for producing pavers, blocks and bricks.

    ...more
    Get Best Price
  • Pan Mixer

    Pan Mixer

    Request for Price

    Pan mixers are specially designed, study in construction and easy for maintenance to mix Flyash, Lime, Gypsum, Cement, Sand and Coarse aggregates. The concrete mixed in pan mixer improves the finish and strength due to attrition exerted by the pressure of the CI rollers. The quality of mixing is ensured by inner and outer scrappers and CI rollers. The roller pressure can be adjusted by compressed springs to suit different coarse & fine aggregate sizes. Best quality and tested raw materials are used and hence long life is ensured even at high working rate. Mix - Max pan mixers mixes concrete at very low water - cement ratio suitable for producing pavers, blocks and bricks.   SPECIFICATIONS: CAPACITY AVAILABLE FROM 200 KG TO 1000KG.

    ...more
    Get Best Price
  • Interlock Wall Block Making Machine

    Interlock Wall Block Making Machine

    Request for Price

    Automatic machine can be easily operated by simple pressing of a push button for each cycle of the mould.The cycle logic is very well designed with a PLC which will operate the first station and subsequently next station will start operating on its own without any time delay..

    ...more
    Get Best Price
  • hydraulic tile making machine

    hydraulic tile making machine

    Request for Price

    This decorative tile making heavy duty hydraulic press is also suitable for making clay tiles. Features include heavy duty high quality steel plate fabrication, mild steel plate fabrication, mild steel assembling body, heavy duty hydraulic cylinder , pumps , valve etc. Tested for up to the pressure between 7000 and 10000 Ibs/sw.inch.

    ...more
    Get Best Price
  • High Density Concrete Block Making Machine

    High Density Concrete Block Making Machine

    Request for Price

    Automatic plc based high Density Concrete Block Making Machine, wooden or steel pallets fed and located by the chain conveyor , on high frequency vibrating table. Mould is filled manually which is over the pallet. The mix is pressed and vibrated on both sides simultaneously, resulting in voids free, high density blocks with excellent texture and finish. The blocks thus formed are voids free, 30% more denser which makes the block less water obsorbtion and manifold increase in stsrength which is not at all achievable in egg laying and hand operated machines

    ...more
    Get Best Price
  • HAND OPERATED DOUBLE CONCRETE BLOCK MAKING MACHINE

    HAND OPERATED DOUBLE CONCRETE BLOCK MAKING MACHINE

    Request for Price

    Hand operated stand type single/double block making machine is movable to any sites for convenience. It can caste blocks on wooden pallets inserted on both side or on one side. With the advantage of toggle mechanism top pressing ram, the knock of the vibrations are bolstered effectively to the blocks with small manual force.

    ...more
    Get Best Price
  • Grinding Machine

    Grinding Machine

    Request for Price

    The easy to use economical disintegrator is suitable for pulverizing the laterite stone and soil for interlock bricks production. Since there is only one revolving part which require no adjustments whatever, it can be operated in any circumstances. Different types of screens and various mesh grids are available and can be fitted in the lower half of the machine to determine the fineness of the output.

    ...more
    Get Best Price
  • EARTH COMPACTOR WITH PETROL ENGINE

    EARTH COMPACTOR WITH PETROL ENGINE

    Request for Price

    Used for compaction of industrial concrete flooring, sub-base road bed, pavement block laying etc. This powerful vibratory plate compactor can be used for many other purposes as it acts like a mini road-roller.

    ...more
    Get Best Price
  • EARTH COMPACTOR WITH MOTOR

    EARTH COMPACTOR WITH MOTOR

    Request for Price

    Used for compaction of industrial concrete flooring, sub-base road bed, pavement block laying etc. This powerful vibratory plate compactor can be used for many other purposes as it acts like a mini road-roller.

    ...more
    Get Best Price
  • Earth Compactor with Diesel Engine

    Earth Compactor with Diesel Engine

    Request for Price

    Used for compaction of industrial concrete flooring, sub-base road bed, pavement block laying etc. This powerful vibratory plate compactor can be used for many other purposes as it acts like a mini road-roller.

    ...more
    Get Best Price
  • CONCRETE MIXER WITH MOTOR

    CONCRETE MIXER WITH MOTOR

    Request for Price

    An excellent companion in construction work, this concrete mixer gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • CONCRETE MIXER WITH DIESEL ENGINE

    CONCRETE MIXER WITH DIESEL ENGINE

    Request for Price

    An excellent companion in construction work, this concrete mixer gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • Concrete Mixer Machine with Hydraulic Hopper

    Concrete Mixer Machine with Hydraulic Hopper

    Request for Price

    An excellent companion in construction work, this concrete mixer with hopper gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • CONCRETE INTERLOCK WALL BLOCK MAKING MACHINE

    CONCRETE INTERLOCK WALL BLOCK MAKING MACHINE

    Request for Price

    This machine has two seperate working stations powered by 10 HP hydraulic power pack.Each station(mould) has seperate hand operated values to activate pressing and lid cylinders.By proper timing of the cylinder operations,through valve, maximum prodcution can be achieved.

    ...more
    Get Best Price
  • CONCRETE INTERLOCK BLOCK MAKING MACHINE

    CONCRETE INTERLOCK BLOCK MAKING MACHINE

    Request for Price

    Automatic machine can be easily operated by simple pressing of a push button for each cycle of the mould.The cycle logic is very well designed with a PLC which will operate the first station and subsequently next station will start operating on its own without any time delay.

    ...more
    Get Best Price
  • CFT CONCRETE MIXER WITH MOTOR

    CFT CONCRETE MIXER WITH MOTOR

    Request for Price

    An excellent companion in construction work, this concrete mixer gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • CFT CONCRETE MIXER WITH HYDRAULIC HOPPER

    CFT CONCRETE MIXER WITH HYDRAULIC HOPPER

    Request for Price

    An excellent companion in construction work, this concrete mixer with hopper gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • CFT CONCRETE MIXER WITH DIESEL ENGINE

    CFT CONCRETE MIXER WITH DIESEL ENGINE

    Request for Price

    An excellent companion in construction work, this concrete mixer gives a homogenous mix by the mixing action causing each part of the mix to be lifted in turn as the drum rotates and at a certain point in each revolutions allowing it to be dropped or directed towards the bottom of the drum where it combines with other part of the mix in continuously changing sequence.

    ...more
    Get Best Price
  • Builders Hoist

    Builders Hoist

    Request for Price

    We are instrumental in manufacturing and supplying a high quality range of Industrial Material Hoist. These products are engineered from finest quality components and advanced technology in compliance with the defined industry norms. long lasting and provides trouble free operation.   SPECIFICATIONS: 1. Very sturdy and user friendly 2. Low maintenance and easy to install 3. Available with Electric motor or Diesel engine

    ...more
    Get Best Price
  • BASE MIXER

    BASE MIXER

    Request for Price

    150kg mixing Pan - with 3hp motor, 1000mm dia x350mm height, bottom plate 16mm, side plate 10mm, with extra ring 10 mm inserted to bottom section and all blade manufactured with hardened steel plates including gear box.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
We are a leading industry in Kerala(S.India) with vast experience in Engineering and Machinery manufacturing field. The company is having a upward growth rate since 1987.
The objects to be pursuded by the firm are:
The manufacturing of Hydraulic pressing machines for mosaic tiles, mosaic polishing machines, marble polishing machines, concrete block making machines, concrete mixers, wood working machines, pulvarizers, bakery machines, fly-ash brick making machines, b Bottle sealing machines, chemical mixing machines, chemical tables, etc.
To undertake the repair, modification, alteration or demolition of all types of machinery.
To prepare, develop and market drawings, models and prototypes of all types of machines required for engineering industry.
To act as stockists, propaganda agents, distributors, promoters, etc of the machines and spares of other manufacturers.
To undertake the contract work for supplying any machinery including the power to obtain or allow sub-contract work.
To deal in construction materials, hardware, paints, varnish, nuts, bolts and locks, etc.
Read More »

Contact Information

George Engineering

  • George Engineering
  • Muringoor, Chalakudy, Thrissur Dt. Kerala, S.India - 680 316
top