Rock Bolt Dealers (37 products available)

• Country of Origin: India

all type hydraulic rock breaker machine spare parts available. jcb breaker,atlas copco breaker, furukawa breaker, daemo breaker, soosan breaker, general breaker, fine rock breaker, npk breaker, volvo breaker, hammer breaker, krupp breaker, indus rock breaker, dowin rock breaker, vainav rock breaker  spare parts available we produce all kinds of hydraulic rock breaker spare parts, such as chisels, through bolt, wear bushes, pistons, diaphragm, front head, back head, rod pin/biscuit lock, nitrogen gas charging kit, nitrogen gas cylinder, seal kits, control valve, accumulator and etc. our products match for all type rock breakers

• Application: Auto Spare Part
• Material: Stainless Sttel , Mild Steel
• Condition: New
• Surface finish: Color zinc plated
• Length: 300mm (min.) and 2200mm (max.)
• Diameter: 25mm (min.) and 400mm (max.)

Feature: Hydraulic Chisel Bushes (Upper and Lower) Retainer Bar / Tool Pin Trough Bolt Piston Front Head Seal Kit Other Spare and Accessories

Rockbolts provide a conventional means of strengthening underground openings and stabilizing cut slopes in rock. It is therefore important to check that installed Rockbolts will not fail through over loading. The Instrumented Rockbolts comprise a hollow ribbed steel bar fitted with upto four internal extensometer rods. The extensometer rods are secured at anchor points to the body of the Rockbolt at predetermined positions. The extensometer rods extend from each anchor point to the measuring head. Any extensional and/or compressional force initiated by loading at locations along the length of the Rockbolt cause the displacement of adjacent rod extensometer anchor points. Consequently a change in the position of a particular anchor point causes a movement of the attatched extensometer rod which move independently of the other anchor points. Movement of one or more of extensometer rods in relation to the measuring head is monitored by inserting a dial depth gauge into the appropriate aperture in the measuring  eadDetails Product Code - EKE 851, EKE 852,EKE 853 EKE 851 -  Rockbolt, 25 mm dia. x 1.5 m long EKE 852 - Rockbolt, 25 mm dia, x 3 m long EKE 853 - Rockbolt, 25 mm dia, x 6 m long EKE 854 - ENKAY - SIL Instrumented Rockbolt, 25 mm dia, 3 m long EKE 855 - ENKAY - SIL Instrumented Rockbolt, 25 mm dia, 6 m long EKE 860 - Dial Depth Gauge, 0.001 x 5 mm The Instrumented Rockbolt is used to measure change in the magnitude of loads distributed along the length of the bolt as a function of time.ApplicationsMeasurement of Rockbolt loads To monitor the behaviour of jointed roof and floor strata during various mining/tunnelling stages To determine the magnitude of loads on roof supports Instrumented Rockbolt

Rock bolting is a primary means of rock reinforcement used to stabilize excavated rock in underground mines and tunneling. Rock bolts are systematically arranged in such a manner as to transfer the load from the unstable surface or exterior of the rock, to the stronger interior part of the rock.

• Size: Diameter: 16mm 18mm 20mm 22mm
• Brand Name: Goodgood Manufacturer
• Material: Steel
• Place of Origin: India
• MOQ: 1 Ton

We are offering rock bolt. The rock bolt is a unique and highly advanced bolt that can absorb rock movements with excellent predictability. It is designed to dissipate and control large amounts of energy liberated from the rock mass deformation process. Thread rock bolt is used together with dome plate and net for reliable ground support in mines, tunnels, slopes, or wherever.

• Brand Name: Arc
• Material: Fiberglass
• Surface Finishing: Polished
• Shape: Round
• Color: Black
• Design: Threaded
• Bolt Shape: Threaded round
• Application: Mines
• Size: 15-30mm
• Certification: ISI Certified, ISO 9001:2008 Certified
• Grade: ASTM
• Feature: Dimensional, High Quality
• Technics: Resin
• Packaging Type: Sea worthy
• Type: Bolts
• Diameter: 20-30mm
• Thickness: 25mm dia
• Country of Origin: India

• Brand Name: JB Engineering
• Material: Mild Steel, M S/HT
• Color: Silver, Black, Epoxy Coated Black/ Zinc/Green Epoxy Coated
• Type: Ms Bolt Nut, Clients Specifications
• Country of Origin: India
• Shape: Round, Threaded Bars
• Surface Treatment: Zinc Coated/ Epoxy Coated
• Application: Civil Construction/ Slope Protection
• Size: 40-50mm, 30-40mm, 20-30mm, 10-20mm, 0-10mm, As Per Clients Specifications
• Grade: FE-500/550/670/950/1050
• Feature: Slope Protection
• Packaging Type: Export Worthy Packing
• Certificate: MTC/3rd Party Certificates
• Diameter: 12mm To 50mm
• Code: JB-10
• Finish: Smooth
• Surface: Clients Specifications
• Quantity Per Pack: As Per Requirements

• Features:: Anchor Fasteners (Facade Anchor)
• Usage/Application:: Facade Anchor
• Type of Heads:: Round-head
• Plating:: Silver
• Condition:: New

>> Rock Bolts / Expansion Rock Anchor Bolts / Resin Anchor Bolt   We are offering our client an excellent quality range of Rock Bolts. These Rock Bolts are made from very high quality raw material which ensures high durability at its user end. These Rock Bolts are in high demand in the market. Mild steel rock bolts used to stabilize stones for drilling of tunnels.The rock bolt is a unique and highly advanced bolt that can absorb rock movements with excellent predictability. It is designed to dissipate and control large amounts of energy liberated from the rock mass deformation process.Thread Rock Bolt is used together with dome plate and net for reliable ground support in mines, tunnels, slopes, or wherever.FEATURES :(1) In the longitudinal direction, rock body has equal tensile strength ,that is about 40% higher than the reverse-twist bolt in the same specification .(2) Extend the support area , not only be used by end anchoring ,but also be used by fully anchoring ,that has a better support efficiency .(3)Low price, widely used in coal mines, railways, hydropower and other types of roadway projects.All-Thread Rebar Rock Bolt :1.Material: steel2.Function : used as rock bolt for strata support3.Diameter : 16mm 18mm 20mm 22mm

• Material: Stainless Steel, Mild Steel, Carbon Steel
• Diameter : 25mm, 32mm, 38 mm
• Customisation: Yes
• polished: Yes
• Finishing: Color Coated
• Application: slope protection or stabilisation
• Drilling Capacity : 51 mm

A rock bolt is a long anchor bolt, for stabilizing rock excavations, which may be used in tunnels or rock cuts. It transfers load from the unstable exterior to the confined (and much stronger) interior of the rock mass. Srons Engineers are the largest manufacturers, suppliers and exporters of all types of Rock Bolts in India.R thread self-drilling rock anchorR type self-drilling rock anchor consist of a hollow threaded (Rope thread) rod with a sacrificial drill bit, plate, nut, and an extension coupling. The coupling offers a flexibility to easily adjust the rod length to the site requirements, it is especially widely used in a confined workspace with limited head room.T thread self-drilling rock anchorT type self-drilling rock anchor consist of a hollow threaded (trapezoidal thread) rod with a sacrificial drill bit, plate, nut, and an extension coupling. The coupling offers a flexibility to easily adjust the rod length to the site requirements, it is especially widely used in a confined workspace with limited head room. Prestressed rock anchorPrestressed rock anchor consists of a hollow threaded (rope thread) rod with a expansion shell type anchor head, plate, nut, and an extension coupling.    

Rock bolting is a primary means of rock reinforcement used to stabilize excavated rock in underground mines and tunneling. Rock bolts are systematically arranged in such a manner as to transfer the load from the unstable surface or exterior of the rock, to the stronger interior part of the rock.Self-Drilling Rock Bolt is a rock-bolting system based ona fully coarse threaded hollow bar.It is especially recommended for the following applications :- Roof and wall bolting.- All ground conditions. Self Drilling Rock Bolts do not require to pre-drill a hole, therefore making it usable even in soft rock conditions.- Installation with grout. The hollow steel anchor rod also acts as a grouting pipe to ease set up. For non-grouting applications, please refer to Mechanical Anchor or Expandable Friction bolt.- Temporary or permanent applications. With optional epoxy coating available for permanent applications.

We are a leading best quality FRP Rock bolts Manufactures India

• Type: Rock Bolt
• Material: Alloy Steel, FRP, Metal, Mild Steel, Stainless Steel
• Thickness: 0-2 Mm, 2-4 Mm, 4-6 Mm
• Length: 0-50 Mm, 100-200 Mm, 200-400 Mm, 50-100 Mm
• Type: Anchor Bolt
• Color: Shiny-silver, Silver
• Pattern: Plain
• Condition: New
• Finishing: Galvanized Finished

• Material: Mild Steel
• Type: Tensioner Bolt
• Size: 3feet length
• Usage/Application: For Hydraulic Rock Breaker
• Head Shape: Hex

FiReP® SPINMAX® is a self drilling rock bolt with advanced torque and pressure resistance. The high load bearing capacity of the threaded profile allows strong jointing with drill bits, nuts and also couplers. Due to it’s cuttability SPINMAX® FRP Self-Drilling Rockbolt is an economical alternative and also offers enormous advantages for modern rapid heating methods in tunneling. Furthermore the cuttability protects the machinery and avoids obstructions while drifting or enlarging tunnels. The bolt has a high radial pressure resistance for injections with resins or grout and is corrosion resistant for permanent support. The SPINMAX® offers a high tensile strength and can carry high loads. Its low weight with high torsional strength makes the bolt well suited for works in loose rock up to a maximum hardness of 60 – 70 MPa. Advantage Offers various distinct advantages including super high torque resistance, high end loading, easy handling and carries a R32 standard thread profile Application Key applications include face stabilization, forepoling, slope stabilization, ground support in soft rock and systematic rock bolting

• Type: Rock Bolt
• Material: Metal
• Thickness: 15-75MM
• Length: customized
• Type: Anchor Bolt
• Color: Black
• Pattern: thread
• Condition: New

Product Introduction Prestressed threaded bar (or PT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension and anchorage and the like, and is a novel material for developing prestressed concrete component. Fully threaded steel bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight. The continuous external thread is hot rolled. The shape of thread bar is shown as following figure. The main dimension ranges from ⌀15 mm-⌀50 mm and the grade ranges from 500/630Mpa to 1200/1330Mpa.

• Brand Name: CANCO FASTENERS
• Material: Steel
• Type: Anchor Bolt
• Model Number: ISO 9001 2000
• Capacity: Strong
• Port: Mumbai
• Standard: DIN
• Supply Ability: 100 Ton/Tons per Month

• Material: Steel
• Brand Name: CANCO FASTENERS
• Type: Anchor Bolt
• Diameter: M6
• Port: Mumbai
• Packaging Details: As per requirements.
• Place of Origin: Delhi, India
• Standard: DIN

We are the main supplier of this product.

Rock Bolts, Picket Steel Angle, vinyl fencing, fence posts, Stone Gabions

rock bolt, Anchor Bolt

Rock Bolts, Mining Equipments, mine car, mining pp wire mesh, Rebars

Srons engineers are indian manufacturers exporters distributors of rock bolts, self drilling anchor bolt systems, sda bolts, threaded rods, hollow bars, fully threaded bars, coil rods, hollow rods, tie rods, high tensile thread bars, ms thread rods, plain washers, flat washers, spring washers, spring lock washers, hex nuts fasteners, hex bolts fasteners, strut support systems, spring channel nuts, tunnel bolts, minining bolts, tunnel rock bolts, mining rock bolts, coil mining fasteners, tunnel fasteners, mining fasteners, sas 670 800 bars, din 125 washer, din 127 spring lock washers etc in india punjab ludhiana. Our products are available in material like stainless steel and mild steel and finish of products like hot dip galvanized & zinc finish. We are exporting our products to uk, usa, australia, canada, uae, belgium, denmark, dubai, france, germany, ireland, italy, netherland, new zealand, norway, saudi arabia, sri lanka, sweden, bangladesh etc.

A rock bolt is a long anchor bolt, for stabilizing rock excavations, which may be tunnels or rock cuts. It transfers load from the unstable exterior, to the confined (and much stronger) interior of the rock mass.

Rock Bolts, Industrial Fasteners, Hot Dip Galvanized Fasteners

Self Drilling Rock Bolts, Shear Connector Stud with ferrule, soil nails

FRP Rock Bolt, FRP Pole, FRP Epoxy Rods, Frp Blower