Ablaze Export Incorporation Ajwa Road, Vadodara, Gujarat

we offer Vent Valve. Valves are widely used in the chemicals, pharmaceutical and allied industries. They form an essential part of any process plant or system in a wide range of applications, such as flow controls, pressure relief and filtering. Valve bodies are made-up of Borosilicate glass 3.3 with PTFE bellow. So the material comes into contact with these products (Borosilicate glass and PTEF) only. Therefore valves are fully corrosion resistant and chemically inert as they have a glass body. Monitoring of the valve operation can be done visually. The entire valve range is suitable to use at full vacuum.

Material : Borosilicate Glass

Type : Vent Valve

The glass plant and equipments are supported in a rectangular tubular structure. This tubular structure consists of galvanized mild steel tubing with cast iron fittings, which is described in this catalogue. This type of structure provides enough flexibility for future modifications and is strong enough to support a glass plant. S.S powder coated tubings and structure parts can also be supplied on request basis. Following structure fittings are available to use with galvanized iron tubes in order to form a tubular structure of a glass plant. These fittings are made of cast iron and are suitable to the galvanized iron tubes described earlier. These sliding are provided with grub screws to fix it at required position on at galvanized tube. These fittings are specially made to construct a tubular structure, which provides enough flexibility for future modifications without involving any hammering and welding. Since there are various terminologies in common use to determine tube sizes, the following table is given to compare and relate them to the fitting size reference.

Brand Name : Ablaze

We are offering storage tank. They are composed of glass cylindrical kettles or flasks of capacity 200-500, discharges of vessels are consistent by glass piping dn 50/40.

Brand Name : Ablaze

we offer Solid Liquid Extraction Unit. This operation involves preferential solublizing of one or more soluble constituents (solutes) of a solid mixture by a liquid solvent. The unit described here is for a semi-batch operation. The solid to be extracted is put inside a glass fiber bag and placed in an extraction vessel. Solvent from the re-boiler is continuously evaporated, condensed and circulated through a reflux divider by means of piping network and valves. When desired/ steady concentration of solute is achieved in the solution the operation is discontinued. The solution is drained off and collected for further use. After charging fresh solid in fiber bag and solvent in re-boiler, the cycle can be restarted again. The unit is available in vessel sizes of 10, 20, & 50L and is suitable for operation under atmospheric pressure.

Type : Extraction Equipment

Brand Name : Ablaze

We offer sight glass. Sight glass is a device used to check the inline flow of various fluids.sight glass enables between any king of non transparent pipelines to observe the flow of liquid. This can be used both in horizontal as well as vertical pipeline.sight glass is constructed in such a way that it gives a complete view from every angle. since glass is transparent, non-reactive, non-contaminant with most of the chemicals,sight glass in borocilate & quartz construction remains universal engineering item.wetted partin ptfe, viton,butyl polymer in the assembly is equally non-corrosive and allows process variation & thus rugged & leak proof construction. Available sizes 15 dn to 150 dn.

Material : S.S

We offer heat exchanger. Shell and tube heat exchanger provides a versatile alternative to the coil-type heat exchanger described in previous pages. Shell and tube heat exchanger is particularly suitable for applications where large heat transfer area is required in relatively confined spaces. It is equally suitable for heat transfer between two liquids or gases. shell & tube heat exchanger is available in single-pass as well as multi - pass. both versions are available with glass or mild steel shells in combination with glass tubes as standard. Consequently, there are three basic models.

Usage : Heat Transfer

Type : Shell & Tube

Brand Name : Ablaze

  We are offering rotary evaporator. The rotary evaporator principle is the most universal method, as it is an efficient, fast and gentle way to separate liquids. The rotating flask continuously covers a large surface area with a thin film, which is ideal for rapid heat transfer. Fortuitously, the film also ensures uniform heat distribution without local heating. the facility to work the unit under full vacuum further facilities evaporation at as low temperature as possible. These features, combined, renders rotary film evaporator to be ideally suited for evaporation of heat sensitive material. It is equally successful for evaporation of suspension in crystallization processes drying of powder / granule etc. salient features: table top model, sleek, compact with minimum footprint. very specific feature additionally incorporate & found useful in r&d areas such as continuous feed tube. High effective vertical condenser for maximizing recovery rates, provision for reflux distillation through reflux valve as an additional feature, total recovery of product condensate to recovery flask. designed especially for solvent separation-miscible & immiscible, crystallization. control panel located on the front of the unit thereby protecting the user from the hot water bath. heating bath features non-slip handles for safe up down movements of bath. At the time of power failure can also be operated manually. construction of vacuum seal is made of ptfe, which extends its life and reduce down time. indigenously developed vacuum seal mechanism in ptfe giving competitive edge against well-established rotary flask of international or other indian make. ip-55 insulation protection against dust & fumes.

Brand Name : Ablaze

This is a versatile unit and can be used as Reaction Distillation Unit, Fractional Distillation Unit or a combination of both. All features of Reaction Distillation Unit and Fractional Distillation Unit are incorporated. These units are available in vessel sizes of 20, 50, 100, 200L & 300L and is suitable for operation under atmospheric pressure and full vacuum.

Type : Spherical or Cylindrical Reactor

Brand Name : Ablaze

We offer reaction distillation unit. This unit is used for carrying out reactions under stirred condition and with provision for simple reflux distillation. the reaction vessel is mounted in a heating bath and fitted with addition vessel, motor-driven stirrer and provision for condensation with refluxing. the product is sub-cooled and collected in a receiver. The unit is available in vessel sizes of 20, 50, 100 & 200l, 300l and is suitable for operation under atmospheric pressure and full vacuum.

Type : Spherical or Cylindrical Reactor

Brand Name : Ablaze

We offer quick release coupling. quick release coupling always applications where there is need to open or close a couplings as quickly without using tools. Charging materials to reaction or extraction vessels or replacing measurement indicators are typical examples of this. upper flange with slotted bolt -holes, hinged quick release bolts and a lower backing flange, which is fixed on the glass and are separated by means of hinged quick release bolts and wing nuts. Depending upon the frequency of opening, the sealing gasket may need regular renewal.

Application : Easy Removel

Material : Alluminium

Brand Name : Ablaze

We offer ptfe lined stirrer. This unit is suitable to use under corrosive conditions. Only glass & ptfe are exposed to process fluids. Bellow seal can be used under vacuum down to 10mm hg absolute. Mechanical seal can be used under vacuum 1 mm hg absolute or under pressure permitted into glass vessels. we are manufacturing of s.s ptfe lined stirrer (anchor , impeller & paddle type) with mechanical chuck and seal assembly.

Application : Mixing of Material

Material : PTFE

Size : Up to 500LTR.

Brand Name : Ablaze

we offer Ptfe Bellow. PTFE bellow is an important support in the construction of glass plant and pipeline. It can be used to compensate for different thermal movement between glass and associated equipments, absorb vibrations from associated equipments or foundations. In particular, bellow can be used for connecting glass to other material. When bellow is used, the support and restraint of the glass should be such that the force resulting from pressure/vacuum in the pipeline and forces resulting from movement of the bellows do not result in undue stresses in the glass. The maximum operating temperature for PTFE bellow is 200oC. Bellow DN 80 and above should not be used under vacuum. For such application we recommend the use of vacuum bellow as detailed on the following page.

Material : PTFE Lined

Size : 12"

Brand Name : Ablaze

We offer Plant Process Equipment . Ablaze has concept and history of developing and applying process system to chemical industry and helps to improve environment by offering exhaust gas absorption and waste water treatment. Reclamation of chemicals/solvent part in becoming economical viable process. all around the actual synthesis material flows accumulate in the chemical and pharmaceutical industry, which must be cleaned under environmental aspects or still contain resources. At the same time, the requirements of the environmental protection laws also must be adhered to as well as the cost saving preparation and recycling resources. in the scope of our process activities ablaze offers basic and detail engineering services to commissioning in different project levels up to turn key delivery. We use different material of construction such as borosilicate glass, ptfe, fep-pfa lined components, tantalum to arrive at cost effective and environment friendly solution.

Brand Name : Ablaze

We are offering mobile reactor. Mobile vessel is perfect for pilot plant and production use to transport and store products. Cylindrical mobile vessel can be supplied from 30 to 200 liter and spherical vessels from 50 to 200 liter. If required, it can also be graduated.

Material : Borosilicate Glass

Brand Name : Ablaze

We offer mixing reactor. Mixing reactor systems represent a long-term evaluation of equipment and customer requirements. The mixing reactors are preferably used for wide applications in laboratory, pilot plant & for small-scale production. They reduce the need for investment in permanent installations & also reduce the pressure & temperature losses resulting from pipeline installations. These reactors are available with spherical shape & cylindrical shape. These reactors are also available in cylindrical jacketed form. construction of assembly: stirrer drive, non-flameproof or flameproof motor, 192 rpm. Available with suitable condenser (hta m2). Stirrer shape glass impeller stirrer with ptfe blades, vortex stirrer, propeller stirrer & anchor stirrer. Stirring assembly with bellow seal or with mechanical seal. Supporting structure in carbon steel, epoxy coated carbon steel, stainless steel 304 & stainless steel 316. All structures are available in trolley-mounted form. Closing valves are available as a drain valve or flush bottom outlet

Brand Name : Ablaze

The MIXER -SETTLER is a revolutionary new device, which makes phase separation automatic and simple, irrespective of the concentr two phases (interface height). The mixer settler is the name given to a type of EXTRACTOR made up of a number of mixing and chambers connected alternately in series. In the mixing chambers optimum mass transfer is achieved by through mixing of two phases waid of pumps and stirrers. In the simplest case, the MIXER -SETTLER consist of adjustable overflow valve, stirrer drive assembly and zone.

We are offering liquid extraction unit. liquid extraction, sometimes called solvent extraction, is the separation of constituents of a liquid solution by contact with another insoluble liquid. The unit described here is for a semi-batch operation. the liquid to be extracted is poured into an extraction vessel. Solvent is boiled in a reboiler vessel and condensed in an overhead condenser, the condensed liquid collected in a reflux divider and passed through pipework to the extraction vessel. The pipework incorporates valves in order that the solvent can enter the extraction vessel at either the base of the top, depending on the relative densities of the solvent and liquid to be extracted. The solvent and the extracted liquid pass back to the reboiler and the process is repeated until the extraction is complete. The extraction vessel is then drained and the solvent evaporated from the reboiler vessel and collected in the extraction vessel enables the two liquids to be drained from their respective vessels. the unit is available in vessel sizes of 10, 20, & 50l and is suitable for operation under atmospheric pressure.

Type : Extraction Equipment

Brand Name : Ablaze

we offer Line Valve. Valves are widely used in the chemicals, pharmaceutical and allied industries. They form an essential part of any process plant or system in a wide range of applications, such as flow controls, pressure relief and filtering. Valve bodies are made-up of Borosilicate glass 3.3 with PTFE bellow. So the material comes into contact with these products (Borosilicate glass and PTEF) only. Therefore valves are fully corrosion resistant and chemically inert as they have a glass body. Monitoring of the valve operation can be done visually. The entire valve range is suitable to use at full vacuum.

Type : Line Valve

The kilo-lab facility is basically designed to reduce the gap in capacity between laboratory and pilot plant and manufactured in smaller volume high-value added products. This facility is designed to cater to the pre-clinical requirements and needs of the pharmaceutical industry. The unit is constructed separately from the laboratory but close enough to the pilot plant to access all of pilot plant facilities, such as scrubbers and abatement and vacuum. The facility is operated in accordance with iso standards. The main objective is to provide early phase trial materials in minimum lead times with more flexibility at affordable prices compared to other fully gmp units.

Material : Borosilicate Glass

Type : Spherical or Cylindrical Reactor

Brand Name : Ablaze

We are offfering heating cooling oil bath. s.s heating bath is used for electrical or steam heating of glass vessels. Depending upon the temperature requirements, different types of thermic fluids oil or water can be used as heating media. Heating bath is provided with a pair of non flame proof heaters with digital controller box, s.s coil for passing the steam or cooling water, cushioned vessel holding ring, a bottom outlet sealing arrangement, a lid and threaded socket type inlets and outlets.

Brand Name : Ablaze

We are offering glass spherical reactor. in the most of chemicals & pharmaceutical plant vessel are used as reactor, receivers, separator, measuring, feed and etc. Vessels can be operate under full vacuum as per given working pressure rating in our technical information. vessels are available in spherical & cylindrical shape form 5 to 500 liter capacity. all vessels are provided with bottom outlet nozzle for which is a suitable valve can be selected form the range of valves. Cylindrical vessel can be supplied with glass / metal jacketed also.

Brand Name : Ablaze

We are offering Glass Valves. Valves are widely used in the chemicals, pharmaceutical and allied industries. They form an essential part of any process plant or system in a wide range of applications, such as flow controls, pressure relief and filtering. Valve bodies are made-up of Borosilicate glass 3.3 with PTFE bellow. So the material comes into contact with these products (Borosilicate glass and PTEF) only. Therefore valves are fully corrosion resistant and chemically inert as they have a glass body. Monitoring of the valve operation can be done visually. The entire valve range is suitable to use at full vacuum.

Type : Vent Vacuum Valve.

Material : Borosilicate Glass

We are offering glass technical units. Ablaze has concept and history of developing and applying process system to chemical industry and helps to improve environment by offering exhaust gas absorption and waste water treatment. Reclamation of chemicals/solvent part in becoming economical viable process. all around the actual synthesis material flows accumulate in the chemical and pharmaceutical industry, which must be cleaned under environmental aspects or still contain resources. At the same time, the requirements of the environmental protection laws also must be adhered to as well as the cost saving preparation and recycling resources. in the scope of our process activities ablaze offers basic and detail engineering services to commissioning in different project levels up to turn key delivery. We use different material of construction such as borosilicate glass, ptfe, fep-pfa lined components, tantalum to arrive at cost effective and environment friendly solution.

Brand Name : Ablaze

We are offering glass pipe line components. borosilicate glass 3.3 pipeline components are widely used in chemical, pharmaceutical and allied industries together with other applications such as food and drugs, dye production and electroplating industries. This is because of the special properties of borosilicate glass 3.3. 1. Smooth surfaces allow easy cleaning and sterilization and prevent the build–up of solids on the inner walls. 2. With almost universal resistance to corrosion, a long service life is guaranteed and maintenance is kept to a minimum. 3. Their transparency permits visual monitoring of the process at all times. 4. Being inert, the risk of contamination is negligible. all the components are suitable for operation under full vacuum conditions. Non-standard size components can also be supplied on special order.

Material : Borosilicate Glass