Megatrend Fabcon Private Limited GIDC Industrial Area, Vadodara, Gujarat

Yoga mats are useful for preventing skin and body of people who exercise regularly. Allows body to be uniform and in a relaxed position during aerobics and exercises.   Features Of Yoga Mats   Yoga mats are nowadays made from foam to give more durability, long term usage and more holding capacity compared to normal cloth and cardboard-paper mats. Textured neoprene is water resistant and helps to stabilize hands and feet in different postures. Half inch or Quarter inch memory foam aids in support while providing comfort to practice. The surface and stability of floor is still felt, but a comfort layer relieves pressure points (knees, elbows, hips, bones, etc.) this allows advancing in postures aiding in more complete practice. A non skid proof EVA material stabilizes the mats preventing, slipping and sliding on studio floors.   Benefits Of Swimming Pads   Helps alleviate pain from tendonitis, carpal tunnel, knee, back, hip and joint injuries. Improves practice through added comfort, support and a unique design. Helps protect wrists, knees, ankles, elbows and head. Stabilizes the body and prevents from slipping. Modern and extremely durable design for a classic yoga mat. Perfect for beginners as well as advanced yoga students.

It is higher density closed cell foam. It provides impact resistance and superior and rigid protection.   Features Of Swimming Pads   The pads are made from polyurethane foam so it is durable, safe and non-toxic. It possesses excellent UV resistance. Very good thermal insulation properties. Ranges vary from soft and flexible to hard and resilient. Light weight, non-corrosive and energy absorbing. Moisture and chemical resistant. Low water absorption values. Reasonably less in cost.   Benefits Of Swimming Pads   High strength to weight ratio. Pleasing aesthetics and texture. Low odour Broad range of colours. Material of choice for new applications.

Spacer Tape is a specialized load bearing PVC foam tape, designed to act as a spacing element between the IG (insulated glass) unit and frame during the assembly of structural glazing fabrications. Main Application Recommended for use as a spacing element in structurally glazed fabrications. Spacer Tape forms an effective short-term bond between the frame and the IG unit during assembly and creates a gap of the correct dimensions for the structural silicone, which is used as the primary bond.   Application Instructions   Surface preparation Surfaces should be clean, dry and free from all contamination. The surfaces should be cleaned using an appropriate cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services should be consulted and advice obtained with regard to the choice of primer for specific purposes   Application   Unwind the tape and apply the open face directly to the frame. Cut to the required length forming tight butt joints at the corners. Press the tape firmly onto the surface by hand or by using a seam roller. Remove the protective liner immediately before glazing. Carefully position the IG unit onto the tape and apply pressure to consolidate the bond. The structural silicone can now be applied.

Single-sided adhesive foam tapes allow bonding to a surface or joining of two adjacent or overlapping materials. Single sided foam tapes are usually coated with acrylic or rubber adhesive. Applications include control panel doors, AHU�s, Ducts etc. usually comes in 10 Meter length, in required width and required foam, EPDM/Neoprene/XLPE/PU etc. This product provides good firmness and thickness which enables durable, long term performance for gasketing, sealing and cushioning. It possesses excellent chemical resistance, good weather ability and water-seal tightness. Resists low compression stress and will not deform the structure after application as it conforms rough surfaces and gaps. The use of gaskets provides excellent vibration dampening and high impact absorption. It provides resistance against UV attack and provides resilience to withstand high temperatures. These properties are achieved by selecting right type of foam and adhesive.

Self-Adhesive plain foams for duct insulation (EPDM / Nitrile/ XLPE/ EP etc): Insulation foam needs to be fixed on metal ducts in central A.C. system. Insulation fixing on site is a challenging task. The process involves cutting the foam in to required length and width, application of solvent based adhesive on both the surfaces (foam and duct) with the help of brush and then fixing the same on duct after the solvent gets dried. Modern countries use self-adhesive baked foams for duct insulation. The same result in saving in labour cost, speedy execution of work, reduces risk of fire due to use of highly flammable solvent based adhesive and human fatigueless. Workmanship of the job is better as the adhesive is uniformly coated on entire surface. The adhesive backed foams are also very useful in insulation of perforated metal false ceiling For large size HVAC project the same is very useful as you get assured delivery and consistent quality of material in large quantity. The same is possible due to mechanized coating process and higher productivity at site. The same can be offered in two formats: a. Pre-cut insulation foam pieces duly adhesive baked in accurate dimensions as per duct design. (Saves on wastage, improves productivity but cut piece sizes needs to perfectly determined)b. Standard roll duly adhesive baked.

Why Returnable Packaging? Leading companies in a wide variety of industries across the globe implement reusable packaging for the economic, social and environmental value that re-use provides across the entire supply chain. Reusable hand-held con�tainers, bulk containers and other transport packaging items are used for the efficient stor-age, handling and distribution of products throughout the supply chain Reusable packaging products are manufactured and designed for multiple trips and extended life due to its durability. These products typically replace single-use transport packaging due to their reusable nature offering a rapid return on investment, lower cost-per-trip than single-use packaging products. At Megatrend Fabcon Private Limited we have an excellent infrastructure and modern equipments to produce various products such as universal boxes, telescopic boxes, trays, postal boxes, crates, bins, separator sheet, etc. All reusable products from PP are made by us. These products are available in wide range of colours, sizes and profiles depending on the customer requirements and specifications. We give brief details of the various options as given below:Our contribution to Reusable Packaging Applications

Various customized partitions are available in products offered by us to increase the storage space area within products to store multiple items

Pouches made from foam provides effective solution for cushioning, surface protection, abrasion resistance, blocking and bracing during shipment and transportation. Possess high tear resistance and compression strength. Flexible recyclable polyethylene foam which is easy to use, crushproof and non-abrasive. Foam fabrication in various shapes, colours and sizes can be provided.

Packaging Fitments These are fabricated foam inserts for providing surface protection against impact. It possesses excellent abrasion resistance and is available in single expandable fitment design to cover wide range of models without affecting cushioning characteristics. Develop anti-static fitments and foam covers to prevent development of static charge. This protective layer prevents moisture, oxygen and other material deposition on metal surface. Innovation in cushion packaging that protects the products from rusting and corrosion. Combined protective packaging with printed film is available for better strength and resistance against scratches. Cushion packaging with foam fitments can be provided with efficiency which results in improved performance in following applications such as monitors, television frames, electronic goods, industrial and automotive components, etc

A mouse pad also referred mouse mat is a surface for placing and moving a computer mouse. A mouse pad enhances usability of mouse compared to position directly on table by providing a surface to allow tracking of LED or ball to measure movement accurately and without jitter. Some mouse pads increase ergonomics by providing a padded wrist rest. Types Of Mouse Pads With Features 1. Different types of mouse pads are textured as per requirement of mouse comfort Vinyl board cover is prominent because of its natural adhesion property. Once steel ball was replaced by silicone rubber surface, popular fabric surface mouse pad was found to be most appropriate. It helps to keep rubberized roller ball surface cleaner by providing better tracking, speed and accuracy than just a surface. Pad surfaces accumulate dirt which is deposited on internal rollers that picked off ball movement. Dirty rollers cause erratic pointer movement on screen. Benefits Of Mouse Pad The use of mouse pads with precision surfaces eliminates spot jitter effects. Higher speed, more precision and user comfort. Keeping table desk surface from being scratched and worn by continuous rubbing mouse motion. Reduction of collection of debris under the mouse, resulting in reduced jitter of pointer on display. Modern mouse can function with acceptably high accuracy by provision of various foam pads.

Fiber- glass cloth laminated foams In certain HVAC projects, insulation foam with glass fiber cloth lamination is required, basically to improve the mechanical strength of the insulation and prevent scratching of foam by birds or human to maintain the integrity of foam. Reinforced glass fiber will be unaffected by water, solvents and paints. Special surface treatment is also available for UV protection, which allows high strength bonds without compromising strength of glass fiber fillers. Light weight and robust material provides better acoustic insulation and it is available in natural or black colour. It provides immense bulk strength and durability to the foam.

The Inter Locking mats are made using high density Eva foam with soft core in the middle to offer maximum protection and reduce the jerk or strain . Interlocking soft foam mats are properly tested on well-defined quality parameters to maintain high level of excellence and quality. Available in multiple designs and patterns, interlocking floor mats provide maximum comfort to the users. The range of inter locking stable mats is durable, soft and eye-catching. We use vibrant color printing in these inter locking mats to make them more stylish. We also provide customization facilities to fulfill the needs of clients. Inter Locking Mats Are: Easy to install - put together a floor in minutes with easy interlocking edges. Nontoxic - Made from EVA foam, tested free of formamides, BPA, phthalates. No latex or fire retardants. Cushioned - Comfortable to stand on, protects kids that are learning to walk. Quality - We have been selling top quality foam mats since 1994. Quick Shipping - Orders placed before 1PM EST M-F generally ship the same day.

What Is It And Where Can I Use It? (Description And Applications)   Megatrend Fabcon Pvt. Ltd. is one of the leading manufacturers in the field of customized self-adhesive products, providing a variety of closed-cell and open-cell foam materials to practically every industry. The applications include gap sealing, cushioning, protection, insulation and noise absorption. The different formats in which foam products can be supplied include tape rolls, pads, disks, sheets, washers, kiss-cut gaskets, die-cut profiles, etc. to suit special applications.   Some Examples Of The Frequently Processed Foams Are:   Cross-linked PE foam Elastomeric nitrile foam Irradiated cross-linked polyolefin foam Open-cell PU foam

What Is It And Where Can I Use It? (Description And Applications)   Foam Dots and washers are single-sided adhesive coated foam products incorporating a peel-able acrylic adhesive and high density foam for the protection and verity of uses including surface protection and washes in plumbing applications. The low tack pressure sensitive peelable acrylic adhesive allows clean removal from glass, metal and PVC surfaces leaving no adhesive residue or ghosting marks. The adhesive is UV and temperature resistant and will offer consistent bonding strengths and clean peel after prolonged periods in contact with the glass surfaces. The product is available in various grades for thickness and density of closed cell XLPE foam. This foam has been developed to offer excellent compression resistance and recovery even after high loading weights have been applied. Specifically designed for the separation and protection of sheets of flat glass, sealed units and automotive glass in transit and storage, it is also used to aid protection during installation. It is suitable to use with painted and pressed metal panels or similar surfaces.

Protects fragile items while transport and storage as cushions serve the purpose of providing absorption against shock and vibrations. We can offer different types of foams as per the requirement of customer such as EPE (Expanded Poly Ethylene), XLPE (Cross-Linked Poly Ethylene), PU (Poly Urethane), antistatic and conductive foams cushions.

Foam is cut through material and adhesive, but not through fabrication liner is called kiss-cutting. Kiss-cut parts are used for easy removal of single parts on customer assembly line systems. Material can be processed at high rates of speed. Kiss-cut components possess ability to custom laminate various material substrates together thus saving time and are relatively quick and easy to apply. Depth of the cut can be controlled very precisely. Useful method for high volume applications as process is carried out in combination with other processes. Per piece part cost is less in this process. Multiple numbers of components can be placed on release liner with help of adhesive. Applications include acoustical insulation, electronics and electrical industry, HVAC and industrial sealing, automotive industry, etc

FOAM CAPS FOR ADVERTISING BRAND & PROMOTION   Foam Cap is made from High Quality Crosslinked PE Foam in Varity of attractive colours & designs. This kind of caps can be made in design as per customers need. This is a very good promotional item at very low cost. Due to excellent visibility can help in promoting brand in any major event or gathering of children.   Soft Foam,   Light Weight Flexible Attractive Colors Tailor-made Designs

Nitrile / EPDM foam Insulation tapes During insulation foam fixing on ducts or on pipe, a small gap is created at every joint, to prevent energy loss from the gap, 2 /3  wide self-adhesive Nitrile or EPDM foam tape, in 3 mm Thickness, is widely used by HVAC contractors. It is also used to wrap it on Cold or hot piping and fittings. It is excellent for preventing condensation on chilled water and refrigeration piping system. This self adhesive tape firmly adheres on all metals due to use of high performance acrylic pressure sensitive adhesive..

The natural foam toys are available in various shapes and multiple colors making it attractive. Attributes such as softness and flexibility make it relatively safe, tactile and bendable so children enjoy playing and learning with these toys. These toys possess strength and durability.   Features   Water durable - Closed-cell foam, non water-absorbing and moisture proof Rot resistant - Sea-water, oil, acid and alkali durable, antibacterial, safe and non-polluting Easy processing - Continuous, easy hot press shaping, casting, gluing and joining. Shock proof - Good flexibility, anti-hardening, excellent shockproof and cushion capability. Sound Insulation  Closed cell foam, good sound insulation property.  Heat preservation - Excellent heat insulation, anti-cold non-frosting and insulation enduring capabilities.   Benefits   Boost creativity and improves thinking skills. Develop maths and science skills thereby significantly increase childrens IQ level. Open ended play with endless possibilities Enhance childrens natural abilities. Allow children develop deep understandings of mathematical and geometric principles. Encourages interaction and quality time between child and parent.

Foam Tapes (Double-Side) Double-sided adhesive foam tapes having adhesive on both sides allow joining of two items back-to-back. Double sided foam tapes made from medium density cross linked PE/EVA foam or EPDM foam. Foam is used as base material and high performance adhesive coating on both side is done and is provided with release paper or film. Applications include structural glazing, industrial equipments, etc.

This is a foam board for adding dimensions to P.O.P. and standees. Its unique core produces tightly closed edges with a pillowed dimensional effect. It provides other interesting effects within an image such as embossing and debossing. Features Of Display Standees   Amazingly light weight. Possesses crushable core. Ultra smooth surfaces. Double-clay coating. Available in variety of sizes.     Benefits Of Display Standees   Strong, durable and 100% recyclable. Printable and reusable. Customizable and labour saving. Easy to assemble and weight bearing. Eco-friendly.

These cut sheets have high coefficient of friction and thus provides protection against scratches and maintains superior flexibility. It is strong, durable, and reusable. low density and light in weight. Available in custom fabricated shapes, sizes and colours.

CD/DVD spiders are self adhesive Foam Dots which are used to attach CD's and DVD's to promotional items, literature or even the office wall. High Quality Self Adhesive Backing Means They Can Be Applied To Many Surfaces And Are Ideal For All Your Needs. Superior Adhesion Soft Foam Easy to remove from release paper Attractive colors Specifications :  

Diameter : 15,5 mm

Thickness : 4 mm

Material : Special Polyethylene

Type : Plate Polyethylene

Aluminum Foil backed foam with or without adhesive backing. Aluminum foil laminated foam provides good thermal resistance and adds mechanical strength to insulation system. Aluminum foil works as a resistance to dust, oils, solvents and fluids and is also useful for preventing piecing of foam by birds on site. Easy to cut and maintains long service life by providing additional strength. It also regulates the room temperature and do not absorb liquids. The joins and edges can be sealed with matching self adhesive aluminum foil. The same can be provided in self adhesive foam also.