Back Back
Toxic Gas Analyser
TOXIC GAS ANALYSERS TGA-1 accurately measure the concentration of a particular gas in parts per million (ppm) / %. These toxic gas analysers use Electrochemical / NDIR / PID sensors which have an enviable reputation for reliability, stability and rugged design having an electrical output linearly proportional to concentration level of the gas.
...more
SGM-1P Personal Safety Gas Monitor
The PRIMA SGM -1P is A PERSONAL SAFETY GAS MONITOR which is small, lightweight, versatile and as per IS:5780 for Intrinsic Safety monitoring any one gas from the table below. It weighs less than 210 grams and 10 x 7 x 3½ cm in size. It is durable and hardy enough for use in harsh environments meeting the standards of Environmental Tests under IS:13109. Application : A personal Safety Gas Monitor which is small, lightweight, Versatile & as per IS 5780 for safety monitoring. Gases Monitored: CO, H2S, SO2, NO, NO2, Cl2, Br2, NH3, CO2, VOC, O2, O3, H2, A3H3, HCN, PH3, COCl2, HCl, ETO, ClO2 etc.
...more
SGA-1P Personal Safety Gas Detector
The SGA-1P is personal gas alarms which are handheld. The instruments work on a 6 volts disposable dry cell. They have two alarms both audible and visual and low battery indication. SGA-1P are fitted with highly reliable & reputed electrochemical sensors. A belt clip is provided for hands free use. Application : A personal Safety Gas Monitor which is small, lightweight, Versatile & as per IS 5780 for safety monitoring. Gases Monitored: CO, H2S, SO2, NO, NO2, Cl2, Br2, NH3, CO2, VOC, O2, O3, H2, A3H3, HCN, PH3, COCl2, HCl, ETO, ClO2 etc.
...more
PSGM-1-D-AGS Continuous Stack Gas Emission Monitoring System
The PSGM-1-D-AGS –Flue Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO) and Oxygen (O2) in flue gas of Boiler / Furnace / Thermo pack Stack gas emission. SO2, NO, NO2, NOX (NO + NO2), CO, O2 The PSGM-1-D-AGS –Process Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO), Chlorine (CL2), Hydrochoric Acid gas (HCL), Hydrogen Cynide (HCN), Hydrogen Fluoride (HF), Hydrogen Sulphide (H2S), Ammonia (NH3) and other gases on request of Process / Scrubber / Incinerator Stack emission. SO2, NO, NO2, CO, CL2, HCL, HCN, HF, H2S, NH3 etc. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and denitration.
...more
PSGM-1-D-AGS (CEMS-L-IS) Continuous Stack Gas Emission Monitoring System
PSGM-1-D-AGS (CEMS-L-IS) is a flameproof tunable laser gas analyzer for industrial online analysis and environmental on-line monitoring, which can in-situ analyze O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various complex conditions. It consists of transmitter, receiver and connection box. The transmitter drives the tunable diode to emit laser of certain wavelengths, which passes through the environment to be measured, then reaches the receiver. The receiver performs photoelectricity conversion, signal processing and spectrum data analysis to obtain the measuring result. The connection box contains I/O interface, making the connection of power cable and signal cable convenient. Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
...more
PSGM-1-D-AGS (CEMS-HW-PF) Continuous Stack Gas Emission Monitoring System
PSGM-1-D-AGS series HW-PF online monitoring gas analyzer is an on-site installation Platform mounted gas analyzer which is developed after years reaching and design on online gas analysis instruments. It can monitor gas parameters, including concentration of SO2, NOx, O2, Dust, Humidity, Temperature, Pressure, Flow and etc. It is widely applied to tail gas emission monitoring and process analysis in many fields, including coal-fired power plant, waster-to-energy plant, cement factory, glass factory, lime factory, ceramics factory, sinter, coke oven, DeSOx process and DeNOx process. PSGM-1-D-AGS series HW-PF online monitoring gas analyzer adopts 150° C. high temperature heat tracing for whole process, on-site filtering and sampling, on-site analysis and measuring technology. All paths contacting with gas are made of 316L stainless steel & PTFE. This gas analyzer has many transcendent features, such as low detection limit, accurate measuring result, easy to calibrate and compare, with simple construction and without any moving parts. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
...more
PSGM-1-D-AGS (CEMS-C) Continuous Stack Gas Emission Monitoring System
PSGM-1-D-AGS (CEMS-C) Continuous Emissions Monitoring system can monitor gases, including SO2, NOx, O2, dust, humidity, temperature, pressure, flow parameters, etc. In addition, also can monitor gases for a particular occasion such as HCI, HF, CO, CO2, NH3, H2S, Cl2, VOC, etc. PRIMA is the only high and new technology Indian company witha full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet flue gas analyzer, dust monitor, temperature pressure flow, humidity meter, HCI analyzer, HF analyzer, pretreatment system, monitoring software, etc. Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de nitration.
...more
Personal Air Sampler
THE PERSONAL AIR SAMPLER Model PAS25 consists of a mini pump driven by a D.C. motor working on a 6 volt rechargeable battery. These work continuously for up to 10 hours between charging. If required, the air sampler can be used, while charging by 220 V AC mains supply. The screw arrangement allows variation of flow rates between 0.5 and 2.5 litres/minute. A flow meter is mounted on the face of the box. Pulsation dampers are internally fitted on the inlet and outlet gas circuit to smoothen the air flow. The pump unit is fitted into a M.S. case of compact size. The sampler unit can be kept on a flat surface for stability at the breathing zone level of the worker to take STEL(15 mins.)/ TWA-TLV (8 hour) measurements. The air sampler is supplied with battery charger in a carrying case.
...more
PE-SPMMS-C91 (SM-1) Continuous PM Dust Opacity Emission Monitoring System
The SM-1 ON-LINE STACK OPACITY / SMOKE MONITOR is a Microprocessor based, PHOTOOBSCURITY monitor designed for the continuous monitoring of % OBSCURATION and calculated concentration in mg/m3,in chimneys and stacks. The LIGHT SOURCE and PHOTO DETECTOR are mounted across the stack thusmonitoring smoke emissions in terms of % obscuration in the stack.This provides an aid to plant efficiency and safe guards you against illegal pollution ofthe atmosphere caused by excessive smoke and particulate matter discharge.The complete instrument comprises of the light source unit, the detector unit, thesignal processing unit and optionally an automatic air purge system.It is supplied with adjustable mounting fixtures.Special menu aids installer in aligning of detector with light source. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
...more
PE-SPMMS-C91 (LBS) Continuous PM Dust Opacity Emission Monitoring System
PE-SPMMS-C91 (LBS) is an on-line dust monitoring device using the mainstream technology of laser back-scattered light principle with imported core components. Mainly used for continuous monitoring of various sources emissions of particulate matter concentrations. It can be either equipped with CEMS, or connected with dust monitoring network by a shared set of data acquisition and processing background. It is available for the monitoring and control of soot emission, flue gas DeSOx and removal of dust for power generation boilers, industrial furnaces, industrial boilers in the thermal power, iron and steel metallurgy, petrochemical, chemical, cement production, ceramics, waste incineration, etc. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
...more
PE-SPMMS-C91 Continuous PM Dust Opacity Emission Monitoring System
works on in-situ methodology. continuous spm monitoring system is designed & built ontriboelectric effect. this is a phenomenon which occurs when moving solid particulate matterscomes into contact with the sensor. this phenomenon being essentially molecular, the process isvery repeatable. this method of sensing yields very accurate and highly reliable results, since thesignal generated is directly proportional to the mass flow rate. in fact triboelectric technology is theonly one available around the world which senses solid flows directly. radioactive, laser and opticalmethods are indirect as they are based on the principles of absorption of one or the other form ofenergy. the spmms-c91 range of dust monitors uses tribo-electric technology – dc sensor.this type is fundamental sensor of mass flow and can be calibrated directly in units of gm/sec orkg/hr. dc sensors have a linear response to mass flow over a wide range of gas velocities.these devices provide a simple low-cost mass flow measurement that, unlike mass concentrationmeasurement, requires no further normalization to deliver an absolute measurement ofenvironmental impact. signal generation is proportional to mass flow of solids / solid particulatematter across the sensor. mass flow, however, is an absolute standard. it provides a measurement of total mass emission froma source and used as a direct assessment of environmental impact. it is valid for any type ofprocess, combustion or non-combustion and may be considered as being the most relevantreporting method. the dc tribo-electric probes system is proportional to mass flow. the probe is linearly proportionalto mass flow and thus offers a simple low-cost solution to dust emission monitoring, by providing measurement of the environmental impact of any emission source. application : boiler, furnace, thermo pack, process, wetscrubber, waste incinerator. apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
...more
oxygen meter
The prima oxygen meter model om-a is an intrinsically safe instrument which measures % oxygen in workplace atmosphere. the instrument display is driven by the electrochemical sensor output, which is of the order of 1.5 milliamps in air with voltage of 0.8 volts in open circuit. These weak output values make the sensor intrinsically safe per iec. there is no battery power required to drive the galvanometer and therefore no spark can be generated whatsoever. it has an analog display. Application : a personal safety gas monitor which is small, lightweight, versatile & as per is 5780 for safety monitoring. gases monitored: co, h2s, so2, no, no2, cl2, br2, nh3, co2, voc, o2, o3, h2, a3h3, hcn, ph3, cocl2, hcl, eto, clo2 etc.
...more
oxygen analyser
the prima model oa is microprocessor based trace oxygen analysers offer all the desired features of an highly advanced instrument at affordable prices. application : a personal safety gas monitor which is small, lightweight, versatile & as per is 5780 for safety monitoring. gases monitored: co, h2s, so2, no, no2, cl2, br2, nh3, co2, voc, o2, o3, h2, a3h3, hcn, ph3, cocl2, hcl, eto, clo2 etc.
...more
MGM-4P Personal Safety Multi Gas Monitor
PRIMA MGM-4P is a microprocessor based, handheld, convenient & portable multi gas monitor designed for the monitoring of four gases, % OXYGEN, ppm CARBONMONOXIDE, ppm HYDROGEN SULPHIDE & % LEL of a COMBUSTIBLE GAS. It is fitted with highly reliable and reputed sensors. The instrument works on disposable dry batteries, optionally a rechargeable battery can be provided. The instrument is capable of SAMPLING, VIEWING and DATALOGGING of INSTANTANEOUS VALUE, STEL AND TWA readings. Logged data can be downloaded to a computer for printing or storage along with the date and time of the readings. Two Alarms, both audible and visual are provided. Application : A personal Safety Gas Monitor which is small, lightweight, Versatile & as per IS 5780 for safety monitoring. Gases Monitored: CO, H2S, SO2, NO, NO2, Cl2, Br2, NH3, CO2, VOC, O2, O3, H2, A3H3, HCN, PH3, COCl2, HCl, ETO, ClO2 etc.
...more
Loop Powered Transmitter
Often it is more cost effective to replace a sensing head with one which is pre-calibrated at a testing station, thus reducing disruption of the measuring system. Prima offers such an industry standard 4-20 mA transmitter consisting of an electrochemical sensor, its associated circuitry and in a weather-proof / flame proof (DGMS/CMRI approved) housing. Application : A personal Safety Gas Monitor which is small, lightweight, Versatile & as per IS 5780 for safety monitoring. Gases Monitored: CO, H2S, SO2, NO, NO2, Cl2, Br2, NH3, CO2, VOC, O2, O3, H2, A3H3, HCN, PH3, COCl2, HCl, ETO, ClO2 etc.
...more
Flue Gas Monitor
PRIMA FGM model is microprocessor and architecture ensure simplicity in use, trouble-free performance, cost effectiveness and reliability. FGM incorporates microprocessor key controls which are fully menu driven. Stored data can be viewed or downloaded to a computer or printed out by an external printer. A built in pump draws flue-gas through the integrated temperature cum gas probe. The instrument works on an inbuilt rechargeable battery.
...more
Explosive Gas Detector
The PRIMA Model EGD is a portable easy to use, compact, durable, COMBUSTIBLE GAS ANALYSER with a 0 to 100 % LEL range. It Measures combustible gas in diffusion Mode. With an option of Inbuilt Pump which draws the sample gas through the probe when the momentary type pump switch is depressed. Two settable alarms both visual & audible are provided. Flame flash back arrestors to the inlet and outlet of the gas circuit are incorporated. The sensing head is certified for use in hazardous locations. Application : A personal Safety Gas Monitor which is small, lightweight, Versatile & as per IS 5780 for safety monitoring. Gases Monitored: CO, H2S, SO2, NO, NO2, Cl2, Br2, NH3, CO2, VOC, O2, O3, H2, A3H3, HCN, PH3, COCl2, HCl, ETO, ClO2 etc.
...more
AAPQMS-19C Ambient Air Quality & Environment Monitor
AAPQMS-19C works on Laser scattering principle which allows immediate and continuous measurement of fine particle present in the air both with respect to their number, their dimensions and their concentration in µg/m3. The system is designed for Continuous Monitoring Application to be installed open to sky at the prescribed monitoring location in the plant.The Microprocessor & PLC based technology helps the system to perform accurately & efficiently. An instantaneous reading of the level of pollutants is displayed at the location of system installed. It offers a facility for interfacing to a computer for Real Time & Date Remote Data Acquisition & Monitoring. On screen, continuous display of concentration with real date & time in tabulation with over range identification and graphical representation of each measurement. High resolution readings at low cost, RTD based Continuous Monitoring, No Pre-heating time required, Non corrosive components are some of the key features of this system.
...more
gas detection system
Stack gas emission monitoring system (cems)rnstack spm/dust/pm emission monitoring system (cems)rnambient air quality monitoring system (caaqm)rnmultiper gas detection systemrnfuel gas analyserrnportable/continious gas analyser & detectorsrngeneral perpose air samplerrnoxygen analyser.
...more
ph mete
Digital Dew Point Meter
Digital Conductivity Meter
Toc Analyzer
Online TOC Analyzer
Raw materials form the basis of any product and thus we obtain them after checking against varied quality parameters. Moreover, we procure raw materials only from reliable sources. Owing to our cordial associations with the renowned logistics companies, we are capable of delivering the orders on time.
...more
Online pH Meter
Online COD BOD Analyzer
Gas Analyzer
Online Flue Gas Analyzer
Oxygen Gas Analyzer
Reviews & Ratings
Write a ReviewOpening Hours
Share your Correspondence Details to receive messages from Prima Equipment
