Sight Glass Valve Dealers in Vadodara (10 products available)

A wide variety of Glass valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation. All the glass valves are suitable for operation under full vacuum conditions and a maximum temperature of 200º C. Borosilicate Glass Valves are available from DN 15 to DN 50. Bigger size Glass valves are available on request.

Type : Vent Vacuum Valve.

Material : Borosilicate Glass

We are offering Glass Valves. Valves are widely used in the chemicals, pharmaceutical and allied industries. They form an essential part of any process plant or system in a wide range of applications, such as flow controls, pressure relief and filtering. Valve bodies are made-up of Borosilicate glass 3.3 with PTFE bellow. So the material comes into contact with these products (Borosilicate glass and PTEF) only. Therefore valves are fully corrosion resistant and chemically inert as they have a glass body. Monitoring of the valve operation can be done visually. The entire valve range is suitable to use at full vacuum.

Country of Origin : India

Type : Sight Glass Valve

Material : Borosilicate Glass

Certification : ISO 9001:2008 Certified

Application : Pipe Fittings

Color : Blue

Feature : Investment Casting

Condition : New

Pressure : High Pressure, Low Pressure, Medium Pressure

In the process industry double window sight glass are used as an accessory in the pipeline or inlet or outlet of equipments to view the process fluid flow. Traditional double window sight glasses have the glass fitted between two flanges. Due to the inherent principle of tightening of flanges (opposite bolts are tightened one after the other), the glass by default remains stressed by unbalanced tightening torque from the fitting stage itself. This results into breakage during fitting or reduced life due to thermal expansion on an already stressed glass. Also in the traditional way of holding the glass, both the soft gaskets on both sides of the glass remains exposed to atmosphere resulting into the process fluid leaking out to atmosphere on the instant of the inside gasket failure. Capnut housing provided in the Indoanushka make MULTIVIEW for housing the glass enables a leak proof tightened housing without unevenly stressing the glass as the tightening is obtained by threading on the cap onto the nut and therefore the glass gets uniformly and gradually tightened resulting into negligible or no pre-stresses.
In this kind of a capnut housing arrangement, the inside gasket for the glass soft seating has no scope of getting exposed to atmosphere. In fact it results into the washer being placed inside a mould. Therefore even in situations of the gasket disintegrating it casts itself inside the housing thereby it results into a lifelong leak free situation.
MULTIVIEW double window sight glasses are provided with clear view (visible diameter of the glass) of equal to or more than the size of the double window sight glass. In fact if required a clear view of one or two sizes higher that the size of the double window sight glass can be provided, therefore enabling the user to have as much a large view he requires.

We Offer Glass Valve. Line valve, drain valve, vent valve, angle valve up to 1/2" to 4".

Design Standard : MANUFACTURER'S STANDARD

Shell Design : ANSI B 16.34

Face To Face Dimensions : MFR'S STANDRAD

Flange Connection Rating : ANSI B 16.5 150# / DIN PN 10

Testing Standard : BS EN 12266-1

Connection : FLANGED, RF

A wide variety of Glass valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation.

Sight Glass Valve, Diaphragm Valves, Lined Valve, manual valve

Sight Glass Valve, Lined Flexible Teflon Hose Pipe, PTFE Coating