Primer Paint Dealers in Valsad (4 products available)

Neo has extensive range of primers based on Epoxy / PU / Synthetic Resins. NEO PRIME GUARD grades are quality Epoxy based primers while NEO SHIELD PRIME grades are PU primers. These are used as a primer. They exhibit excellent adhesion properties and will stick to bare metal, Paints, primers, and fillers. They are used as a anti corrosive / protective primers. Neo offers multiple grades loaded with special additives, pigments for meeting specific requirements. Surface Preparation: Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. Application Method: Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.

• Brand Name: Deep
• Matt Finish: Quick Drying

We are deep red oxide metal primer.

synthetic cement primer, Synthetic Enamel

Primers, Decorative Paints, Industrial Paints, anticorrosive paints