Industrial AIR Conditioning System Dealers in Imran Nagar, Vapi (60 products available)

• AIR FLOW CFM: 200

Humidification plants, DE-HUMIDIFIER EQUIPEED WITH HERMETICALLY SEALED RECIPROCATING OR SCROLL COMPRESSOR.DE-HUMIDIFIER AVAILABLE WITH REFRIGERANTS R22, R134 A, R407C, R404A OR R410A. CONSTRUCTION BODY: M S. POWDER COATED OR FULYY STAINLESS STEEL 304 SHEET & ANGLE. HIGH QUALITY FAN MOTOR WITH LOW NOISE. EQUIPEED WITH ALL ELECTRICAL SAFETY DEVICES LIKE COMPRESSOR OVER HEAT PROTECTION, OVER CURRENT PROTECTION, OVER TEMP PROTECTION , ANTIFREEZE PROTECTION.

Air cutrains for pharmasuticals food product industry for control of room environments and dust control on door opening.  

We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements. Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price.   The baffles are normally plates with a single segmental cut. The cut is usually vertical to allow the condensate to flow along the bottom of the shell to the outlet. Double segmental baffles may be specified to achieve reduced pressure drop. The space between the baffles is determined by considerations such as: The tubes must be supported to avoid tube vibration; Pressure drop depends on vapor velocity, and hence on baffle spacing; The resistance to heat transfer due to the presence of noncondensing gases is inversely proportional to the vapor velocity. High vapor velocities can reduce resistance to heat transfer through the shear effect on the condensate film.   Thus, if adequate pressure drop is available, it may be possible to reduce baffle spacing to obtain increased heat transfer rates. The size of the baffle cut is generally chosen such that the vapor velocity in the baffle window is roughly equal to that in the overlap zone between the baffle plates. The number of tube passes is determined by the required coolant velocity. Plain tubes are generally used, though low-finned tubes can be used to obtain increased heat transfer rates when the condensate resistance to heat transfer with plain tubes is significantly greater than that of the coolant. The vapor vent should be situated at the end of the vapor flow path. It is possible to use other TEMA shell types, such as the J-type, to minimize pressure drop. A possible configuration for low pressure drop is the J-shell with double segmental baffles.

• Material: HDPE, UPVC
• Diameter: 40-50cm
• Shape: Rectangular
• Thickness: 5-10mm
• Length: 150-200cm, 50-100cm
• Color: Shiny Silver

All the wiring ducts are manufactured from high impact, self extinguish, wrap proof rigid PVC with lead free material. PVC material carries UL 94 flammability rating of V0 for excellent flame retardancy, continuous use temperature 50°C (122°F). Wiring ducts includes solid & slotted style, narrow slots/finger design provides more slot to closed fit the spacing of high density terminal block and other hardware. The wiring ducts are available in different sizes. Wiring-Ducts comes in standard colour of grey in 1 meter and 2 meter length. Other colour of wiring ducts are also available on request for an minimum order quantity (MOQ).

The conical shaped diffuser in the turbo head slows down the accept velocity and converts it in to a straight pressurized flow enabling users to reduce inlet pressure requirements for a given flow and velocity. In addition the spiral guide welded to the vortex pipe conveys the inlet down ward away from the inlet nozzle avoiding any flow disturbance and initiating the centrifugal process. Centricleaner operates at consistency range of 1.5 to 2% against normal cleaner range of 0.6 to 1% consistency. Centricleaner bottles are arranged in planetary system with inlet header at the centre, distributing pulp stock evenly to all centricleaning bottles at constant pressure. Accept of all centricleaner bottles also collected in planetary manner at the centre. Rejects collect in closed loop in the reject header directly connected to reject pump feeding to secondary stage cleaner. Deareation system also provided for approach flow cleaner to remove air from pulp stock. Bottom cone of Primary bottles provided with ceramic cone for improved life and for efficient separation of heavy contaminates from pulp stock. Flexi glass with quick release fitment provided between bottom ceramic cone and reject header for easy cleaning of nozzles. Dilution at middle of cone provided to increase centrifugal action at bottom cone increasing efficiency of cleaners. Secondary stage cleaner provided with in built tertiary stage and auto flushing in reject chamber for fiber recovery and efficient disposal of heavy contaminates from the system. Features : Can operate at lower inlet pressure. Inbuilt with spiral guide vanes at inlet nozzle to avoid turbulence losses. Inbuilt with DLR system. (Light reject & air removal system). Higher cleaning efficiency. Less plugging tendency. Uniform turbulent free flows and no cross flows. Minimum payback period. Less Floor area – bottles arranged in planetary design. Longer life of bottles – ceramic bottom cone with dilution nozzle. Ceramic cone provided with HDPE cove to avoid damage during handling. No reject nozzle jamming – Flexi glass reject discharge for easy cleaning. No civil works – reject collected in header avoiding reject tanks. Reduce thickener size up to 50%. Power consumption reduced up to 50% in centricleaning.

• Color: AS PER CUSTOMER
• Type: SHELF
• Material: MS
• Country of Origin: Made in India
• Usage/Application: Refrigerator
•  :  

• Material: Galvanized Iron
• Finishing: Polished
• Shape: Shape, Square
• Color: Silver
• Surface Treatment: Coated, Hot Dip
• Certification: ISI Certified
• Length: 015inches, 15-30inches, As per requirement
• Grade: AISI, ASTM, BS, DIN, GB, JIS
• Feature: Durable, Eco Friendly, Fine Finished, High Strength, Perfect Shape, Quality Tested
• Outer Diameter: 100mm, 20mm, 40mm, 60mm, 80mm, As per requirement
• Type: Galvanized Iron Duct
• Thickness: 0-3mm, 12-15mm, 3-5mm, 5-7mm, 7-9mm, 9-12mm, As per requirement
• Country of Origin: India

• Type: AC MOTOR
• Color: GREY
• Country of Origin: INDIA
• Brand: LAXMI HYDRAULICS
• Material: ALLUMINIUM / CAST IRON
• Warranty: 1 YEAR

LHP MAKE AC INDUCTION MOTOR 

We HEAT-COOL FIN INDUSTRIES manufacture industrial chillers which are known for its efficient working in power, engineering, automotive and many other industries. MCS has the specialization in manufacturing of the refrigerated, vapor compression water chillers for the varied applications. Industrial Chillers System components are from: Emerson Danfoss maneurop Tecumseh Industrial Chillers Refrigeration controls are from: Danfoss Sporlan Alco Industrial Chillers come integrated with the insulated SS 304 water reservoir, recirculating pump and electrical control panel. Chillers wim PLC and microprocessor based control are also available. It is manufactured in accordance of requisite norms and standards.

Controls of air perimeters like temperature, Humidity clean air, and air born bacterial infections in the critical industry like food, drugs or pharmaceuticals need tight control.

We are Supplier of this product.

• Material: Cast Iron
• Elbow: 90 Degree C
• Size Range: 40 nb - 1000 nb
• Wall Thickness: 5-10 mm

• Features: Superior functionality,Durable finish standards,Low maintenance

We are the leading manufacturers, exporters and supplier of this products.

• Efficiency: 80-99.97 %
• Flow Capacity Range: 500-1000 cfm
• Shape: Rectangle
• Size: 610 X 610 X 100 MM
• Frame Material: Aluminium

• Size: 90 x 1000 Mm
• Shape: Tube type
• Color: White, Black
• Material: Epdm, Silicom
• Usage/Application: Air
• Brand: Neotech

We are dealing best Cooling Tower supplying company.

Self contained factory assembled and fully automatic systems in varying size to suit conditions. designed to deliver a spray of HEPA filtered air at approximately 6000 FPM from adjustable nozzels in the celing & opposing walls to departiculate fully gowned personnel just before entering controlled areas.

We offer FRP, PP/FRP duct which have tested for any leakeges or cracks before delivery. These ducting carry forced hot & cold air through it. It comes in any size as per design requirement. It also enhances solvent resistance performance These ducting are designed by our technical panel expets for getting the best results.

• Certification: ISO 9001:2008 Certified
• Color: Black, Blue, Green, Yellow
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic
• Power: 1-3kw, 12-15kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2year
• Presssure: High Pressure, Low Pressure, Medium Pressure

• Country of Origin: Made in India
• Material: Plastic
• Country of Origin: Made in India
• Shape: Circular/Round
• Usage/Application: Industrial

With rich industry experience and knowledge, we have been engaged in offering an exclusive collection of Luminous Ceiling Fans. These fans are manufactured and designed by our vendor using supreme class components keeping in mind exact requirements of clients. The offered fans are available in both decorative and economy models to suit individual needs. In addition to this, our offered fans can be availed by our clients at competitive prices.Features: Safety and durability Stylish designs Low power consumption

We are professionally managed organization, engaged in the design, manufacture and supply of water chilling plant in india.

HVAC Ducting, stainless steel exhaust hood, Dust Extraction System

Humidification Equipment

Garg lab glass industries - we are well known manufacturers & suppliers of quality range of condenser in india.

We are offering Control Valve. Introduction This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat to control fluid flow. It is very versatile offering reduced trim options as well as a variety of special trims for severe high pressure drop applications. This style of valve is easily adapted for use on cryogenic temperatures and for high temperature duties. This valve is preferred for tight shut – off, positioning accuracy, high range ability and simplified maintenance, satisfy the majority of control valve applications throughout the process and power industries in control of Air, Steam, Water, Gas, Chemicals etc. We are one of the eminent Globe Valves manufacturers, exporters and traders, based in India. Technical Specifications DESIGN : ASME B16-34 VALVE SIZE : 15 to 450 mm ( 12" to 18" ) RATING : ANSI 150 to 2500 or Equivalents to BS, DIN, etc. FACE TO FACE ISA S.75.03 1985 up to 600 ISA S.75.16 900 and above END CONNECTION : Flanged, Screwed, Butt Weld, Socket weld. BODY MATERIALS : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy BC, PP, PTFE etc. PTFE Lined PTFE Metal Housed BONNET: Standard upto 250oC Normalizing (Finned) between 250oC to 500oC Extended cold service - 20oC to - 200oC Extended Bellows seals.

Water Cooled Scrolled Chiller, AMC of Central Plant, AMC of Chilling Plant

We are one of the famous company, who are manufacturer of air conditioner parts

Refrigerant Gases, air conditioner stabilizers, Refrigeration Tools