Dentex store Thagarapuvalasa, Visakhapatnam, Andhra Pradesh

Features Adequate working time and setting time Easy to dispense, mix and apply to the restoration No interference with adhesion of a final cement Good shelf life Indications Used to restore tooth preparations : For indirect restorations including crowns Fixed partial dentures Inlays and onlays As well as for temporary cementation

Humidity : 5%- 95%

Features Enhanced formula – will not clog 27-gauge needle Non-drying paste – extended shelf-life pH >12 – disinfects canals, prevents flare-ups

Power : 300 W

Humidity : 5%- 95%

Material : Metal

Color : Sliver, Golden, Blue

Dimension : 7.5cm(L) x 2.7cm(W) x 2.9cm(H)

A comprehensive disposable disk system for fast, efficient, safe finishing and polishing of all direct aesthetic restorative materials. Super-Snap Rainbow Kit Includes a complete range of disks in 4 different colour coded grits (Black, Violet, Green, Red) in 12mm and 8mm diameter with Polystrips that correspond to the colour coded grit of the disks. Super-Snappolystrips are colour coded with matching grit size for easy identification and offer the same outstanding results as Super-Snap Disks for finishing & polishing interproximal areas Super-Snap Mini Kit Includes a complete range of disks in 4 different colour coded grits (Black, Violet, Green, Red) in 12mm and 8mm diameter with Polystrips that correspond to the colour coded grit of the disks Designed as an introductory kit with all the colour coded grits (Black, Violet, Green, Red) in 12 mm and 8 mm diameter The polystrips are colour coded with matching grit size for easy identification and offer the same outstanding results as Super-Snap Disks for finishing & polishing interproximal areas Super-Snap X-Treme, the newest addition to the Super-Snap range, exceeds expectations with a naturally lustrous polish on direct aesthetic restorations.Features The unmounted Super-Snap Disks are designed with soft, safe plastic snap-on mounts for mandrels. Non-metal centre to prevent gouging or discolouration of composite surfaces. Improved mandrel design with christmas tree shaped mount for retention and maximum control. Mini disks provide perfect control when polishing cervical areas. Disks are available in 4 different colour coded grits in 12mm & 8mm diameter: Black – for Contouring Violet – for finishing Green – for polishing Red – for Superpolishing

Thickness : 0.6

Application : By Hand Or By Machine

Width : 9, 12, 15 Mm

Color : black or other colors, Green

Pre-trimmed, belled, and crimped to save placement time. Requires minimal adjustment for fast and easy placement. Primary crowns provide a fast alternative to amalgam or composite.Features Pre-trimmed, belled and crimped for fast and easy placement Accurately duplicates anatomy for better fit and performance Superior longevity compared to multi-surface amalgam fillings Permanent molar selection can be used for long-term cases with economic considerations Crown set is packaged in a unique, stackable tray that provides convenient, easy storage of 3M™ ESPE™ prefabricated crowns Wide array of shapes and sizes High-quality stainless steel Key Features Pre-trimmed, belled and crimped Accurately duplicates anatomy for better fit Superior longevity compared to amalgam fillings Wide array of shapes and sizes

Application : Well Drilling

Warranty : 1 year

Features They are ready to use Maxillary & Mandibular plates - 8 Maxillary & 4 Mandibular. Optimum heat resistance to minimize overheating of the Plate. Easily adaptable on heating and easy to work with. Retain the shape stability and do not warp back on cooling. Optimum mechanical strength to resist breaking during try - in denture. Does not adhere to plaster. Key Features Optimum heat resistance Easily adaptable on heating Retain the shape stability Optimum mechanical strength Directions They are ready to use Maxillary and Mandibular plates - 8 Maxillary and 4 Mandibular. Optimum heat resistance to minimize overheating of the Plate. Easily adaptable on heating and easy to work with. Retain the shape stability and do not warp back on cooling. Optimum mechanical strength to resist breaking during try - in denture. Does not adhere to plaster.

Feature : Manufactured in Various Sizes & Patterns

Thickness : 15mm

Features Vessel or apparatus for condensing gases or vapors. A device for illuminating microscopic objects. Capacitor. A dental tool used to pack filling material in a cavity.

Condition : New

Type : Cylindrical vertical & horizontal single pass to four pass

Material : Metal

Color : Grey

Feature : Rust Proof

Application : For Cutting

Packaging Type : Boxes

Blade Material : Metal

Unique Embrace technology bonds to the moist tooth Margin-free, tooth integrating, eliminates microleakage. Self-etching to dentin. Color stable when cured. Your choice of low or medium viscosityFeatures Bonds in a slightly moist field Self-adhesive properties Self-etching to dentin Eliminates microleakage

Features Fluoride Releasing, Light Cure, Radiopaque Wet-Bonding - Moisture tolerant resin chemistry Contains No Bisphenol A, No Bis-GMA, No Bis-DMA Tooth Integrating - Seals against microleakage Key Features Contains No Bisphenol A, No Bis-GMA, No Bis-DMA Wet-Bonding - Moisture tolerant resin chemistry Tooth Integrating - Seals against microleakage Margin-free - No chipping, pitting, or staining. No Bonding Agents Required - Fewer steps - Saves time and money.

CAS No. : 9009-54-5

Application : Strip and Sheet Wood Flooring Systems, for Bonding Many Types of Wooden Parquet

Features For masking out metals and discolored tooth surfaces Spreads smoothly and easily to a thin film 20-Second Light Cure Advantages of Embrace resin technology Key Features For masking out metals and discolored tooth surfaces Spreads smoothly and easily to a thin film 20-Second Light Cure Advantages of Embrace resin technology Directions Ceramic and metal surfaces should be dry prior to applying Embrace Opaquer. Leave tooth surfaces slightly moist. Slightly moist tooth surfaces exhibit neither dryness nor pooled water. Lightly dry and remove excess water with compressed air or a cotton pellet. Tooth surfaces should be shiny or glossy. Overly wet tooth surfaces will result in decreased bond strength. Prepare surfaces as follows: Microabrade metal and amalgam Microabrade ceramic or etch with Pulpdent Porcelain Etch Gel for two minutes carefully following instructions for use of etch gel. It is not necessary to etch dentin or cut enamel. If desired, apply Embrace First-Coat, Pulpdent DenTASTIC UNO or your preferred adhesive tob the prepared surface. This step is optional. Using a brush or applicator tip, apply Embrace Opaquer into the etched or abraded surface. Light cure. Embrace Opaquer cures with all lights. Curing time for a halogen light with a minimum of 300 mW/cm2 is 20 seconds. More powerful lights will cure faster. Proceed with restoration using your preferred materials.

Packaging Type : Glass bottle + individual box

Material : Metal & Plastic

Color : Grey & Black

Weight : 20-30 gm

Feature : Easy to use

Application : Hospital

Material : Metal & Plastic

Color : Grey & Black

Weight : 20-30 gm

Feature : Easy to use

Application : Hospital

Material : Metal

Size : [2.4/2.7mm (0.09/0.11in)]

Weight : 30-50 gm

Feature : Rust Proof

Feature Stainless steel body Handle convenience Max speed of 0 - 40,000 rpm Offers precision and reliability

Weight : 52 Gms.

Type : Disposable or Reusable Reusable

Features The high quality of RMO® at an economical price Ergonomic design provides consistent feel from one instrument to the next Durable construction Precise tolerances for accurate control at all times High corrosion resistance without chrome plating - no risk of plating peeling off Easy instrument care - all standard sterilization procedures are applicable

Feature : Rust Proof

Weight : 20-30gm

Color : Silver

FeaturesThe jaw is any opposable articulated structure at the entrance of the mouth, typically used for grasping and manipulating food. The term jaws is also broadly applied to the whole of the structures constituting the vault of the mouth

Material : Alloy Steel

Condition : New

Finishing : Polished

Needle Gauge : 30G, 27G, 25G

Needle Length : 1 1/2, 5/8, 1/2

Material : Metal

Length : 10-20 mm

Weight : 10-30 gm

Feature : Rust Proof

Features Specially designed for mixing alloy with mercury. Can also be used in general laboratory applications In everyday kitchen applications and much more Mortar is 1 1/4" interior diameter and 1 3/4" exterior diameter Pestle is 3 5/8" long and 1/2" in diameter at the tip. Made of high quality shock and chemical resistant glass

Speaciality : Good Quality

Diameter : 3 to 6 inch

API Matrix Retainer Ivory API Matrix Retainer Toefflemire API Matrix Retainer Ivory With Lateral Shields

Type : Parker, Hercules, Metaris

Application : Permco, Commercial, HYVA, Metaris