Gas Pressure Regulator Dealers in Ahmedabad (10 products available)

The gas governors are conformity with EN 88 standard (2009/142/CE gas regulation). The governors are suitable to systems' installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems. TECHNICAL FEATURES Compensation diaphragm, operating diaphragm and safety diaphragm: an external breather outlet pipe is not necessary as the incorporated safety diaphragm ensures that, in the event of breakage of the operating diaphragm, no gas leakage (over 30 dm3/h) is possible inside the room (in compliance with par. 3.3.2. EN88 specifications). INSTALLATION Install the governor with the diaphragm positioned horizontally (on horizontal pipes). Be careful to follow always the direction of gas flow indicated by the arrow on the governor.Suitable tools must be used for the governor fitting on the inlet and outlet hubs. Never effect leverage on the sleeve of the upper cover when fitting the governor. For all models with the filter inside, the governor is best fitted at a comfortable height from the ground so as to facilitate the filter cleaning (fit always a suitable gas filter upstream the governor).Make sure that the pipes are clean and aligned so the governor is not under stress. Do not remove the perforated diaphragm breather cap (3) and do not obstruct the hole, otherwise the governor will not work. Install the governor so avoiding contact with plastered walls. Make sure that the governor is suitable to the intended use.  

We are the leading manufacturers, exporters and supplier of this products.

We are offering gas pressure regulator, gas filter. Energy combustion, ahmedabad a local source of all types of tecnogas make products. we are distributor of all types of tecnogas make gas pressure regulator rg series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 2 bar and 5 bar gas filter fm series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 6 bar slum shut off valve mvb series size:-2" and 3" safety relief valve mvs series size:-1" gas solenoid valve evp series size:-2" and 3" and all other products are available like pressure switch,pressure gauge attachment, diaphragm etc.

extra high pressure gas regulator extra high pressure gas regulator inlet pressure 400 bar (kg) outlet pressure 280 bar (kg) president brand stainless steel metal gas regulator only one manufacturer in india .extra high pressure buster regulator or gas hydraulic compressor regulator – approved by m/s hindustan aeronautics ltd. Nasik

"Flow-Tek" FT-LPRV- Gas Back Pressure Regulator is the ideal valve for low-pressure gas regulation. The FT LPRV works in conjugation with the in a low-pressure tank blanketing valve system.LPRV can be used to vent gas from the tank to prevent the blanketing pressure from rising to a level that could damage the tank while maintaining a small, constant flow to keep the blanket fresh. During filling, It opens to allow gas to escape as the vapor space in the tank grows smaller. To size properly, find the rate of fill so that a regulator can be chosen based on it's ability to relieve the required amount of gas while sustaining desired blanketing pressure. The Mark 508 will also work well in any other type of low back-pressure gas application.   APPLICABLE STANDARD   Design Standard : MFG. STANDARD Face to Face : MFG .STANDARD End Connection : Flanged End to suit ANSI / DIN / BS / JIS / IS etc. Testing Standard : API 598 / CONTROL VALVE ANSI-FCI-70-2-2006 STD

Material : CS BODY

Color : Red

Pressure : 19 KG MAX

Gas : LPG

Brand : VANAZ

Regulator Type : High Pressure Regulator

Usage/Application : Industrial

Material : Alloy

Country of Origin : Made in India

Gas : CNG

Automation Grade : Manual

Max Inlet Pressure : 260 Bar

Voltage : 12 V DC

Power Consumption : 17W

MAXIMUM INLET : 3000 PSI

OUTLET RANGES : 0 - 25 BAR

These regulators are intended for primary pressure control of non-corrosive gases at a maximum inlet pressure of 3000 psi.