Flame Rod for Gas Flames
Get Price Quote
The Flame Rod for Gas Flames is planned to detect visible light emitted by oil flames. These are not appropriate for oil-fired furnaces with the refractory blaze. The resistor is planned and manufactured in fulfillment with set manufacturing standards using qualitative stuff. Flame Rod Manufacturer for Gas Flames have planned them to detect small Ionisation current for the gas flame Economical Flame Sensor small Gas Burners significant to pursue Installation signs for the trustworthy operation. Flame detection systems have been made to add different features. The device of the detection merged with an appropriate flame control mechanism creates a signal. That signal then concerns a physical action, which permits the system to work to run in the presence of a fire or shutting down the method in an arranged way in the flame’s deficiency. Some of the best Flame Rod Manufacturer in Mumbai for Gas Flames planned them as the domestic heating systems makes use of the thermal effect of the flame as a technique of detection. Significant time is necessary for the sensor to heat and at the same time to cool on flame loss. The system’s response time used on the bigger-sized burners may show a dangerous or unacceptable danger. Contact the team of professionals if you are interested in the product range.
Arduino Pack Flame Sensor
Get Price Quote
Best Deals from Flame Sensors
Flame Sensor
Get Price Quote
We are suppliers of burners & boilers spares, monarch nozzle, danfoss nozzles,sequence controllers, suntec pumps, gear pumps, photocells, ignition transformers, flame sensor, duplex filters, ignition electrodes, temperature controllers, sensors, blower fans, burner motores, pressure switch thermic fluid pumps & its spares, blast tubes, boilers coils, solenoidcoils, heaters, level switch,& more.
Flame Sensor
Get Price Quote
We make available Flame Sensor at market leading price of Rs. 90. To make sure supreme quality retaining, we bundle our goods in high-grade packaging supplies that can endure mechanical damages and logistical jostling. Moreover, they are branded to provide product details. We follow strict warehousing rules and thus we keep the extensive range of products safe in our well-structured warehouse, which is supervised by our team of experts.
51304907-100 I/O MODULE FLAME SENSOR
Get Price Quote
1 Box (MOQ)
model no : 51304907-100 r product type : i/o module flame sensor spcii i/o this paddle board connects the smart peripheral controller of a wda history module, the spc card, with the winchester drive interface of wda history module. it is physically connected to the wdi i/o paddle board using a waterfall ribbon cable manufacture : honeywell usage : indutrial automation warranty : 1 year
Brahma Flame Sensor
Get Price Quote
We are offering brahma flame sensor fc11 combustion & control systems, mumbai offering oil and gas burners and spare parts, we import genuine spares and supply all over world at affordable prices.
Flame Sensor
Get Price Quote
We can be contacted for customized packaging solutions. Besides the standard packs, we can sort items in desired quantity and pack them accordingly. Our packaging is premium. Our team experts are capable of maintaining database containing complete transactions made by our customers and thus, you can trust us for the online or offline payments made.
Flame Sensors
300 - 450 Per piece
1 Piece (MOQ)
Photoresistor - as Flame SensorUsed for Boilers, Burners,Ex stock available at office.Made in India product All items shown in image are standard supply.Gst @18 % - Courier Charges extra Minimum order quantity : 01 PiecePayment: AdvanceDelivery: Ex-stock, Immediate
Low electrolyte sensors
1,500 - 2,000 Per Unit
5 Pcs (MOQ)
For sensing electrolyte inside the battery. It gives an indication and give buzzer sound when low level detuct. Ones muted sound will go in off mode but automatically resume after 20 hrs if not attended.
Flame Sensor
Get Price Quote
1 Piece(s) (MOQ)
We are offering flame sensor. Introduction the flame sensor can be used to detect fire or other wavelength at 760 nm ~ 1100 nm light. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source or football. It can make use of fire-fighting robots, soccer robots. flame sensor probe angle of 60 degrees, the special sensitivity of the flame spectrum, two m3 mounting holes to stabilize the module will not spin. the flame sensor's operating temperature is -25 degrees celsius to 85 degrees celsius, in the course of the flame it should be noted that the probe distance from the flame should not be too close inorder to avoid damage. specifications interface:analog supply voltage: +5 v detection range: 20cm (4.8v) ~ 100cm (1v)
Flame Sensors
Get Price Quote
The out put contacts can be used for alarm, annunciation or trip purposes. The front panel has indications for SUPPLY ON. This will turn ON when the supply is given. RELAY ON indicator confairms presence of UV radiation flame. Model UV - FR - 21, has a site adjustable time delay of 2 - 8 seconds and is useful for installations with high flicker situation. UV Flame Amplifiers Relay has been designed to work with Endee make UV Sensor UV - 01. However, it work satisfactorily with UV Sensors rated 220 V AC.rms of various other makes.
Flame Sensor
750 - 1,000 Per Piece
Specifications Automation Grade: Semi-Automatic Material: Plastic Usage: Industry
Honeywell Flame Sensor
7,500 Per Piece
Siemens Photocell Flame Sensor
Get Price Quote
Siemens Landis Photo resistive detectors for use with burner controls, for the supervision of oil flames in the visible light spectrum. The QRB1 series are used primarily in connection with oil burner controls in intermittent operation.
Flame Sensors
Get Price Quote
The integral flame monitoring system is primarily used for standard applications ( e.g. oil or gas flames at a burner in a combustion chamber ) because of its limited adjustment possibilities.
Honeywell Flame Sensor
13,900 Per Piece
1 Piece (MOQ)
Flame Sensor
Get Price Quote
Product Description: DANFOSS Flame sensors and Photocells are used for detection of yellow burning oil flames and Oil Burner Flames. Features
Flame Proof RTD sensor with Indicator
Get Price Quote
Customized Flame Proof RTD sensor CMRI Certified Flame Proof Head SS Tube with cast Aluminum Head SS304-Normal,SS316 –chemical Application Simplex/duplex element Pt 100/500/1000 Optional Process Connection NPT/BSP Temperature Range -200 to 600 º C Temperature Transmitter output 4 -20mA optional Size available customized Length/Dia/Process connection
Uv Flame Sensor
1,500 Per Piece
Flame Sensors
Get Price Quote
Our company is one of the leading Flame Sensors Suppliers in Maharashtra. The Flame Sensors that we offer are developed using scientific equipment and advanced machines. These Flame Sensors are equipped with smart sensing technology to detect flame. The Flame Sensors offered by us detect the flame by picking up its ultra violet flux. We offer these Flame Sensors to the clients in different specifications so as to cater to their diverse needs. Known For : Smart sensing technology Robust structureIntelligently detecting ultra violet fluxLong service life
Uv Cell / Qra2 Flame Sensor
Get Price Quote
1 Piece(s) (MOQ)
We are supplier and trader of all types flame sensor and photocell of siemens and landies & gyr make for all types of industrial burner. available list of flame sensor. qrb 1 qrc 1 qra 2 qra 55 qra 10 qra 3 qri 2 rar 7 rar 9 uv cell.
Flame Sensors
Get Price Quote
Ideal for testing flame detectors,Wide Spectral Output - UV, Visible, Near IR, Mid-IR,Tests many Flame Sensors Types UV, UVIR, UVIR², IR³, IR², IR,Conforms to NFPA 72 Chapter 14 (14.4.3)Selectable Optical Output Type
Flame Sensor
Get Price Quote
D-LE 603 Flame sensor
Get Price Quote
Flame sensor (flame scanner) for the monitoring of gas, oil and coal flames, primarily in multi-burner view applications.
Stainless Steel Flame Sensor
9,000 Per Piece
1 Piece (MOQ)
Flame Sensor
Get Price Quote
SS Flame Scanner
500 Per Piece
Flame Sensor
9,000 Per Piece
1 Piece (MOQ)
Flame Sensor
Get Price Quote
module features:1, Flame sensor can detect flame or Fire at 760 nm wavelength, or ~ 1100 nm range of the light source, it can detect flame from a distance of 20cm, Greater the flame the detecting distance also increases.2, detection angle 60 degrees, the flame spectrum particularly sensitive.3, adjustable sensitivity (shown in blue digital potentiometer adjustment)4, Driving ability, more than 15mA5, Operating Voltage 3.3V-5V6, Output format: Digital switching output (0 and 1) or Analog Output.7, with fixed bolt hole for easy installation8, Small PCB size: 3.2cm x 1.4cm9, Using a wide LM393 voltage comparator Working:1, The flame sensor most sensitive to ordinary light is also a reaction, generally used as fire alarm and other purposes.2, A small panel output interface can be directly connected with the microcontroller IO port.3, The sensor and the flame should maintain a certain distance, so as not to damage the sensor.
Photo Voltaic Flame Sensor
Get Price Quote
