Multiplexer Dealers (190 products available)

We are offering Digant Technologies Alarm multiplexer can be used where alarms generated from the power plant are to be monitored by telecom tower companies and telecom operators

Offeirng Alarm Multiplexer. SOLUTIONS :: Multiplexer for extending Single Alarm to Multiple Customers In recent times many telecom infrastructure companies are offering common passive infrastructure to more than one cellular operators. This decreases the cost of capital and maintenance. However, this introduces a problem in case the alarms generated inside the shelter are to be monitored by more than one cellular company. To tackle this problem we have developed an Alarm Extender that extends one alarm to multiple NMS, each one being electrically isolated. Since the outputs are isolated, even if there is a problem it remains limited to only one operator. Also even if NMS are incompatible (some work on -5 Volt DC, some work on 3.5 Volt DC) the alarm system can handle the same. This system was successfully used for underground stations of Delhi Metro where multiple operators are sharing the same infrastructure. Please note that a separate power source gives supply to this system and it does not effect any of the existing systems and can be connected to existing alarms without an any modification. MODELS : (a) 4 Inputs, 8 Outputs. (b) 4 Inputs, 16 Outputs. (c) 8 Inputs, 16 Outputs. (d) Models can also be customised on request. INPUT VOLTAGE : 48 V DC./ 24 V DC

• Voltage: 230V
• Country of Origin: Made in India
• Indication Type: LED light
• Frequency: 50Hz
• Power: AC

• Type: Multiplexer
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation
• Voltage: 220V, 48VDC
• Condition: New
• Channels: Multi Channel, Single Channel
• Brand Name: Spaceage
• Country of Origin: India

we offer bts alarm multiplexers. Multiplexer for extending single alarm to multiple customers in recent times many telecom infrastructure companies are offering common passive infrastructure to more than one cellular operator. This decreases the cost of capital and maintenance. However, this introduces a problem in case the alarms generated inside the shelter are to be monitored by more than one cellular company. To tackle this problem we have developed an alarm extender that extends one alarm to multiple nms, each one being electrically isolated. Since the outputs are isolated, even if there is a problem it remains limited to only one operator. Also even if nms are incompatible (some work on -5 volt dc, some work on 3.5 volt dc) the alarm system can handle the same. Please note that a separate power source gives supply to this system and it does not affect any of the existing systems and can be connected to existing alarms without any modification. The system draws negligible current on account. While this saves energy, it also ensures that the nms contacts in various equipments are not stressed. The response time is of the order of milliseconds. The system is not affected by any shortopen of one or more of inputs or outputs. There are different models such as 16:64, 18:72 or may customize based on: a) no. Of inputs b) input voltage c) cost and size

• Type: Low Level Analog Input Multiplexer
• Weight: 3 Kg
• Warranty: 1yrs
• Brand Name: Honeywell
• Part No: 51309223-125
• Usage: Industrial Use
• No Of Inputs: 16

Product Type : Low Level Analog Input Multiplexer TC FTA MU-TAMT03 Part No : 51309223-125 Model : MU-TAMT03 16 Inputs LLMUX FTA RTD(2) CJR : Local Brand Name : Honeywell

• Country of Origin: India
• Type: Camera Multiplexer
• Application: PoE Camera
• Feature: Compact Design, Shear Strength
• Voltage: 220V
• Channels: Multi Channel
• Ports: G.SHDSL, VDSL2

• Speed: 100 Mbps
• Power Consumption: 5V DC, 350mA
• Channel Type: 4 Channel
• Multiplexer Type: 41 MUX
• Humidity: 85% Rh, Non-Condensing
• Max Data Rate: 3Gbps

Allows RS232 ports to be extended from an upstream site to remote locations using one or more leased lines.  Automatically corrects any errors in user port data caused during transmission on the leased line.  Several cost-effective topologies possible. A single CYGNUS 711 unit at the upstream site can be shared by several remote sites.  Topologies providing alternate paths can be configured, to provide continued connectivity to remote sites even if a leased line fails. Ordering time option for 4, 8 or 16 RS232 Terminal Ports (for connecting user devices), and 2 or 4 V.35 Network Ports (for connecting to leased lines via external modems).  RS232 port speed from 1.2 kbps to 115.2 kbps. Leased line speed from 64 kbps to 2 Mbps.  Very robust RS232 ports with built-in 1500 V AC isolation, which reduces the chances of RS232 port failure even at sites with poor quality power supply, poor earthing, or high levels of electrical noise and surges.  Easy set up and installation. Standard topologies can be set just by setting DIP switches. Extensive set of status indicators., including Activity indicators for each Terminal Port and each Network Port.  Ideal for replacing older Multiplexers in Railway’s PRS/UTS network, and for extending Terminal Server ports from upstream sites to new booking offices for connecting Dumb Terminals there.

• Application: Optical Networking
• Feature: Compact Design,Durable,Fine Finished,Reliable Operation,Shear Strength
• Voltage: 110V,220V
• Color: Black,Brown,Grey,Blue
• Weight:  100gm ,150gm ,200gm ,250gm ,300gm 350gm,400gm ,450gm ,500gm
• Condition: New,Used

FDM Multiplexing - This has two DSB-SC balanced modulators and two channel OP-AMP based linear multiplexer wired as Frequency Division Multiplexer (FDM). Every DSB-SC Balanced modulator circuit has IC 1496 wired with RC components to provide the DSB-SC Balanced AM output for the applied modulating and carrier input signal. The modulating inputs are processed through two DSB-SC Balanced modulators for the applied respective carrier inputs to provide two DSB-SC outputs which is then applied as an input to linear FDM modulator circuit to output two channel frequency division multiplexed outputs. FDM Demultiplexing - This has two channel FDM Demodulator and two DSB-SC Balanced Demodulators with low pass filter wired as FDM Demultiplexer. Every DSB-SC demodulator has IC 1496 wired with RC components and filter network to provide the demodulated outputs for both channel inputs. The applied two channel FDM input is separated by FDM demodulator and then these signals are processed through DSB-SC balanced demodulators to recover the multiplexed signals. on board Sine wave (modulating & carrier) signal generators (4Nos) with variable  frequency upto 100KHz and amplitude. FDM Channels two analog, facility to control the modulating inputs and carrier inputs of both the channel, maximum modulating frequency 10KHz, maximum carrier frequency 100KHz, Bandwidth 3KHz, Built-in fixed DC ±12V/1A Power supply and maximum test points.  Objectives : To study the concept of Frequency Division Multiplexer (FDM). To study  the operation of two channel  FDM. To study the DSB-SC Balanced Modulation. To observe and note the DSB-SC outputs for the applied modulating and carrier inputs. To observe and note change in FDM output w.r.t. change in channel inputs.  To study the concept of Frequency Division Demultiplexing. To study the operation of FDM Demodulator. To study the DSB-SC Balanced Demodulation. To observe and note the demodulated outputs for the applied FDM inputs. To observe and note the change in demodulated outputs w.r.t. channel modulating inputs. Accessories Included : Set of Patch Cords, Operating Manual.

• Weight: 1.8 KG.
• No of Channel: 8 separate channel with individual adjustment of delay and gain control.
• Display: LCD Display 16 * 2 Alphanumeric for indication of parameter value.
• Gain: Adjustment from -10dB to 30dB in step of 1db increment for each channel.
• Delay: Adjustment from 0 to 99mm in step of 1mm increment for each channel.
• Memory: 10 calibration set-up can be store/recall.
• Operating Mode: Factory set T+R / T-R internally selected.
• Channel Status Indication: 8 LED's for indication of on/off status of channel.
• Keyboard: Sealed membrane keyboard with direct access key for channel selection.
• Battery: Li-Ion battery pack 14.4VDC, 4Ah, gives 8 hours continuous operation from fully charged battery. Full charging is done within 4.5 hours.
• Operating temperature: 0 to 55 C.
• Dimensions: 152 x 255 x 70(HxWxD).

• Application: Optical Networking
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation, Shear Strength
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Type: Add Drop Multiplexe

• Type: Add Drop Multiplexer
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS
• Application: Optical Networking

• Features: Fully transparent video and data link Four 10 bit video channel

The Prizm™ Mini 4 Series combines the best of our proven MiniMux 2 and Video 3 technologies to provide an elegant solution for high density applications. The Mini 4 motherboard is a fully integrated fiber optic digital multiplexer modem that is capable of supporting up to two Mini 4 MiniMux 2 daughterboards. Other boards in the Mini 4 series provide stand-alone solutions for interfaces such as serial data, Gigabit Ethernet and HD-SDI and Sonar.

• Type: Multiplexer
• Application: Optical Networking
• Weight: 100gm, 150gm, 200gm, 250gm, 300gm, 350gm, 400gm, 450gm, 500gm
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation, Shear Strength
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS, VDSL2

• Weight: 125 gm approx.
• Power: + 24 V DC ± 10%, 100mA max
• LED’s: 4 LED’s for status indication
• Communication Ports: 3 Communication ports
• Temperature: Operating : 0o to 50oC Storage : -20o to 80oC
• Humidity: 10% to 90% (Non condensing)
• Mounting: DIN rail or back panel mounting
• Dimensions (DIN rail): 105mm(L) X 40mm (D) X 51mm(W)
• Certifications: CE
• Immunity to ESD: Level 3 as per IEC 1000-4-2
• Immunity to Transients: Level 3 as per IEC 1000-4-4
• Immunity to Radiated RF: Level 3 as per IEC 1000-4-3
• Immunity to Conducted RF: Level 3 as per IEC1000-4-6
• Emissions: EN55011 CISPR A

• Type: Add Drop Multiplexer
• Weight: 100gm, 150gm, 200gm, 250gm, 300gm, 350gm
• Feature: Compact Design, Durable, Reliable Operation
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS, VDSL2

• Application: Optical Networking
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation, Shear Strength
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS, VDSL2
• Type: Add Drop Multiplexer

• Feature: Compact Design,Durable,Fine Finished,Reliable Operation,Shear Strength
• Voltage: 110V,220V
• Color: Black,Brown,Grey,Blue
• Weight:  100gm ,150gm ,200gm ,250gm ,300gm 350gm,400gm ,450gm ,500gm
• Condition: New,Used
• Application: Optical Networking

• Voltage: 110V,220V
• Color: Black,Brown,Grey,Blue
• Weight:  100gm ,150gm ,200gm ,250gm ,300gm 350gm,400gm ,450gm ,500gm
• Condition: New,Used
• Application: Optical Networking
• Feature: Compact Design,Durable,Fine Finished,Reliable Operation,Shear Strength

We are offering fiber multiplexer. Frm220-gfom04 4xe1/t1+ gbe fiber multiplexer

We offer Versatile Multiplexer.

• Type: Multiplexer
• Brand Name: TOUCH CONTROLS
• MODEL: 921R000100

touch controls signal multiplexer 921r000100 model: 921r000100 type: signal multiplexer condition: used & working qty: 1 pc available ref: al17  .

• Type: Add Drop Multiplexer
• Application: Optical Networking
• Weight: 100gm, 150gm, 200gm, 250gm, 300gm, 350gm, 400gm, 450gm, 500gm
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS
• Voltage: 110V ,220V

• Application: Optical Networking
• Weight: 500gm, 450gm 
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation, Shear Strength
• Voltage: 110V, 220V
• Condition: New, Used
• Color: Black, Brown, Grey, Blue

• Type: Multiplexer
• Application: Optical Networking
• Weight: 100gm, 150gm, 200gm, 250gm, 300gm, 350gm, 400gm, 450gm, 500gm
• Feature: Compact Design, Durable, Fine Finished, Shear Strength
• Voltage: 110V, 220V
• Condition: New, Used
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Ports: ADSL2+, G.SHDSL, POTS, VDSL2

• Color: White
• Brand Name: CTC
• Multiplexer Type: 41 MUX
• Channel Type: 4 Channel
• Speed: 100 Mbps
• Power Source: Electric
• Material: MS
• Model: FMUX04E

• Application: Optical Networking
• Feature: Compact Design, Durable, Fine Finished, Reliable Operation, Shear Strength
• Voltage: 110V, 220V
• Channels: Double Channel, Multi Channel, Single Channel, Tripple Channel
• Type: Add Drop Multiplexer
• Condition: New, Used

• Weight:  100gm ,150gm ,200gm ,250gm ,300gm 350gm,400gm ,450gm ,500gm
• Condition: New,Used
• Application: Optical Networking
• Feature: Compact Design,Durable,Fine Finished,Reliable Operation,Shear Strength
• Voltage: 110V,220V
• Color: Black,Brown,Grey,Blue
• Finishing: Polished,Color Coated

• Condition: New,Used
• Application: Optical Networking
• Feature: Compact Design,Durable,Fine Finished,Reliable Operation,Shear Strength
• Voltage: 110V,220V
• Color: Black,Brown,Grey,Blue
• Weight:  100gm ,150gm ,200gm ,250gm ,300gm 350gm,400gm ,450gm ,500gm