KUSAM ELECTRICAL INDUSTRIES LTD. Sewri, Mumbai, Maharashtra

Resolution : 1% * Accuracy : ± 1% * Data hold * Measuring Range : 5%~40% * Power : 9V Alkaline or NiCd battery * Dimensions : 126(L) x 70(W) x 29(H)(mm)

Brand Name : Kusam Meco

Type : Waterproof Pen Tester

Condition : New

PD-28 is a high voltage probe used to measure both AC & DC voltage with your multimeter. They consist of 2 kinds of contact tips. One is a round needle tip for normal use & the other is a special flat spring type for CRT anode, a test clip for the ground, a set of test leads for multimeter & a high quality enclosure which has very high insulation properties.

We are offering vehicle tracking system. General description "kusam-meco" km-vtu-01 is suitable for many applications such as vehicle security, fleet management, bpo's etc. With the superior sensitivity gps module on broad, the "kusam-meco" con easily get a fix even in urban canyan condition, unlimited number of vehicles can be tracked & six individual zones can be monitored at the same time on the same screen. "kusam-meco" km-vtu-01 can track the vehicles using gprs as well as sms. Sms can be sent using panic button to pre-defined numbers in case of emergency from the vehicle.

Feature : Small size, light weight and ABS plastic housing which is ergronomically designed for easy use by user,Menu driven simple operation,Measurement maximum 8 km in selectable ranges, Tests any type of copper telecom and signal cables,Range, VOP and Gain are s

Dual display Temperature & Humidity * Accurate NTC sensor * Measures temperature in °C°F * Dew point and Wet bulb Function * MAX MIN MAX-MIN AVG & HOLD function * Portability and simplicity one-hand operation * Quick response R.H. sensor * Display Back-light * Auto Power Off * External probe * CE-Mark approval

Simultaneous display of both temperature and wind speed, Measurement Units : Knots, mph, Kmh, ms, ftmin.Moving 216 second average with Min Max Average, Memory of maximum, minimum and average record for both temperature and wind speed.Air velocity average for multiple points.2 meters coiled cable and mounting nut for long extension.

Accuracy : 230C ±50C

Weight : 390g

Feature : • Three phase coil / Average / Maximum Temperature• Over-Temperature alarm / fans / trip• Set time for fan to automatically operate / manual operation• Drive two industrial fans directly• Fuse protection.• Broken-sensor alarm won’t cause mis

The new Kusam-Meco Temperature Calibrator is an ideal calibrator for calibrating Thermocouples, Temperature Indicators, Temperature Transmitters & SCADA Systems. It has a large 5 digit LCD display with high resolution & accuracy.

Power : 9V

3½ digits display. * resolution 0.1 db. * maxmin hold function. * acdc signal output. * time weighting : fast, slow * rs-232 interface, 14000 records data logger (km-929) * low battery indication. * applicable standards : iec 651 type ii.

Standard Sound rigging values are 94dB and 114dB.12” microphone adapters provided.With low battery indictor.

We offer Single Phase Power Clamp Meter. * Light Weight & Stylish ; 45mm Large jaws opening * 1000A AC Clamp-on + Multimeter ranges * 600V ACDC input protection on all functions * AC True RMS voltage and current functions * + Dual display Power Factor (PF) & A-Lags-V Phase-Shift indication. * Automatic selection of DCV, ACV & ACA measurements (Auto V.A) * Fast PEAK-rms Hold (65ms to 90%) for In-rush ACA & ACV readings * PC-Comm (optical isolated PC interface capability) * Software kit for Win 9598ME2000XP (optional purchase) * Data HOLD * 5Hz ~ 500Hz line Frequency measurements * DCV & ACV 0.1V to 600.0V * ACA 0.01A to 1000A non-invasive current measurements * Ohm 0.1Ω to 999.9Ω * Fast Audible Continuity * Battery cover with Probe holders * Rugged Fire-retarded casing; Soft carrying pouch * Transient Protection 6KV 1.250µs lightning Surge. * LVD EN61010-2-032 CAT III 600V * EMC EN61326(19971998A1) EN61000-4-2(19952000A2) EN61000-4-3(2002)

Fast, accurate, & versatile. Long life expectancy.Toggle between three levels of sensitivity down to 0.1ozyear.Only 30 seconds between start up and detecting.Finds leaks even with refrigerant in the air surrounding the leak.Peak reading indicator with manual reset to clear.

Meets to DN-IEC 688. • Easy Installation & Space saving. • Simultaneous detect & display : - Individual Phase to neutral Voltage - Individual Phase Current - Individual Phase watt. - Frequency - Phase to Phase Voltages. - - Power Factor - - Total Watt - - Total Var - - Watt Hour (10 digit)

Feature : • Natural diffusion sampling method and high-sensitivity sensor, with high sensitivity and repeatability.• CSTN colorful LCD, large & clear.• Compact design, easy carrying.• High strength engineering plastics and compound,anti-slippery rubber; hig

When connecting any 3 phase equipment to the 3 phase power, the first step is to check the phase sequence of the 3 phase power supply. This instrument is a handy and essential instrument for checking the phase sequence in 3 phase Circuits. When connecting motors, energy meters, watt meters, Power factor meters, Power factor controllers, Power meters etc, it is very important to connect the equipments in proper phase sequence, otherwise the instrument equipment can be damaged or give incorrect readings. The instrument can also be used to check for open phase( one phase only). It is used to measure the Phase sequence (R,Y,B) & Open phase Condition through LED and Buzzer.

Digital intelligent MCU paper moisture Meter works on 3 types of paper (carton, copperplate paper, writing paper) by using the spring contact precise measuring.

Power : 9V battery

* 3½ digits Display. * Resolution 0.1 dB. * MAXMIN Hold Function. * ACDC Signal output. * Time Weighting : Fast, Slow * RS-232 interface, 14000 Records Data logger (KM-929) * Low battery indication. * Applicable standards : IEC 651 Type II.

AC; AC+DC True RMS Digital Multimeter with PC Interface . DC Voltage 0.01mV to 999.9V; AC & AC+DC Voltage (50Hz - 20 KHz) : 0.01mV-999.9V,. Capacitance: 0.01nF-25mF, Power Supply Single 9V Battery.