Back Back
Submersible Sewage Pump
submersible sewage pumps are of close couple compact design and have pump below and motor above construction hence sump cleaning is possible to the minimum level. These are powered by squirrel cage induction dry motors suitable for operation at 400440 volts, 3 phase, 50 Hz, A.C. Supply; bearing of these pumps are grease packed. Being a Submersible pump, it saves a lot of cost of construction compared to other conventional pumps and also provides noise free operation. Pumps are fitted with high efficiency non-clog or free flow impellerM for smooth and economical pumping operation. Since they work under pumping liquid, suction is always flooded, hence no need of priming or suction pipe. Pumps are fitted with doubleM mechanical seals to separate motor chamber from oil chamber and oil chamber from liquid being pumped. Pumps are provided with special safety devices like moisture detection sensor and thermister protection against high winding temperature. That can also be provided with special lowering arrangement for easy access of the pump for maintenance.
...more
Submersible Motors
Fully floodable, vertical, close-coupled single-stage submersible motor pumps, with or without level control, for a maximum Head of 30 m. Applications: automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and reservoirs.
...more
Submersible Dewatering Pumps
Fully floodable, vertical, close-coupled single-stage submersible motor pumps, with or without level control, for a maximum Head of 30 m. Applications: automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and reservoirs.
...more
Submerged centrifugal
Vertical or horizontal, single-stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, for wet installation or dry installation, stationary and transportable version. Irrigation and pumping stations, handling of clean water, of cooling water in power stations and industrial plants, industrial water supply systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
...more
Sewage Pump
Wet-installed submersible motor pump with non-clogging impeller, singlestage, single-entry, for installation in Sewage plants. Handling of all types of abrasive or aggressive waste water in water and waste water engineering as well as industry, especially untreated sewage containing long fibres and solid substances, fluids containing gas / air, as well as raw, activated and digested sludge; sea water desalination.
...more
Portable Submersible Pump
‘MBH’ Portable submersible pumps are of close coupled compact design and have pump below and motor above construction hence sump cleaning is possible to the minimum level. These are powered by squirrel cage induction dry motor suitable for operation at 230 Volts &400 440 Volts, 1 Phase 3 Phase , 50 Hz., A.C. Supply. Being a submersible pump it saves a lot of cost of construction as compare to other conventional pumps & also provides noise free operation. Pumps are fitted with high efficiency free flow impeller for smooth and economical pumping operation. Since these pumps work under pumping liquid suction and are always flooded hence there is no need of priming or suction pipe. Pumps are fitted with double mechanical seal to separate motor chamber from oil chamber and oil chamber from liquid being pumped. Only single phase pumps are provided with float for water level control.
...more
Portable Submersible
Fully floodable, vertical, close-coupled single-stage submersible motor pumps, with or without level control, for a maximum Head of 30 m. Applications: automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and reservoirs.
...more
Polder Pump
MBH Polder pumps are portable pumping units which have pump below and motor above construction. These are powered by squirrel cage induction motor suitable for 400440 Volts, 3 phase, 50 Hz, AC supply which is totally enclosed. The motor windings are water and oil resistant and ingress of water or moisture inside the motor due to seal failure or other reason will not render the pump inoperative. The pump motor unit of close coupled construction and the double casing design provides effective water cooling of the motor by flowing water around the motor casing. The motor is sealed by special mechanical seal so that the pumping water does not enter the motor chamber and damage the motor. All parts are made from specially selected material and processed to ensure long life under arduous operating condition.
...more
Mud Pump
maximum flow rate266 m³h, minimum flow raten 17 m³h, maximum head34 m,, speed of rotation 3500 2900 1400 950 revolutionsmin, drive frequency 50 hz 60 hz, type of driveelectric motor, casing materialss 316 ss 410 ss 304 cast iron cast steel nodular cast iron bronze chrome nickel steel..
...more
mono block
Close-coupled, horizontal, single-stage annular casing pump, with ratings and main dimensions to IS standards. Mainly used for Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, fire-fighting systems, swimming pools, handling of condensate, hot water, cooling water, fire-fighting water, oil, drinking water, cleaning agents, service water.
...more
Horizontal Split Casing Pump
MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance, MBH Horizontal Split Casing Pumps allow easy access to facilitate maintenance and inspection of rotor assembly without disturbing pipe connectors and prime mover. These MBH Horizontal Split Casing Pumps give higher efficiencies, stable head and non over loading power characteristics with better suction capabilities, The Pumps are available in standard cast iron construction.
...more
construction pump
Irrigation and pumping stations, handling of clean water, of cooling water in power stations and industrial plants, industrial water supply systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
...more
commercial pump
Handling of all types of abrasive or aggressive waste water in water and waste water engineering as well as industry, especially untreated sewage containing long fibres and solid substances, fluids containing gas air, as well as raw, activated and digested sludge; sea water desalination.
...more
Centrifugal Water Pump
Vertical, single-stage or two stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, for wet installation, stationary and transportable version. These pumps are oil cooled and very low maintenance compared to the standard centrifugal surface pumps.Pumping stations, handling of raw and clean water, of cooling water in power stations and industrial plants, industrial water supply systems, water pollution and flood control systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
...more
Borewell Pumps
Borehole diameter (inch)3, 4, 5, 6, 7, Maximum head490 m, Maximum flow rate400 m³h, Maximum drive rating110 HP 83 kW, Speed of rotation2900 min, Impeller materialSS 304 Custom requirements are entertained, Stage casing materialCI SS 304 Bronze Custom requirements are entertained.
...more
borewell
Multistage centrifugal pump made of Graded CI or Moc of your choice, for well diameters of 75 mm (4 inches) and above, available with single-phase a.c. motor or three-phase motor with motor lead. Domestic water supply, irrigation and spray irrigation systems, lowering of ground water levels, fire-fighting systems, cooling circuits, fountains, pressure boosting and air-conditioning systems.
...more
bore well motor
Borehole diameter (inch):3, 4, 5, 6, 7, 8, 9, 10,12,Maximum head:490 m,Maximum flow rate:400 m³h,Maximum drive rating:110 HP 83 kW,Impeller material:SS 304 Custom requirements are entertained, Shaft material:SS 410 Custom requirements are entertained.
...more
Back Pullout
Horizontal, radially split volute casing pump in back pull-out design to single-stage, single-entry, with radial impeller. Also available in variant MOC's and impeller designs like semi-open impeller. These pumps are used in handling of aggressive liquids in the chemical and petrochemical industries as well as in refinery and fire-fighting systems, handling of brine.
...more
Dewatering
Vertical, single-stage or two stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, for wet installation, stationary and transportable version. These pumps are oil cooled and very low maintenance compared to the standard centrifugal surface pumps. Pumping stations, handling of raw and clean water, of cooling water in power stations and industrial plants, industrial water supply systems, water pollution and flood control systems, aquaculture. Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.
...more
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from MBH PUMPS (GUJ) PVT. LTD.
