Phase Angle Meters Dealers (14 products available)

phase angle meters

Get Price Quote

• Range: 600V.AC
• Input Voltage Range: 50 to 500V.AC
• Auxilliary Power: 230V AC

Digital Phase Angle meter shows phase angle between any two phases of VoltageCurrent Phase of VoltageCurrent can be selected True rms readngs. Inbuilt Voltmeter, Display : 4½ Digit, 12.5mm Bright Red LED., Range : 600V.AC, Resolution : 0.1V, Inbuilt Amp Meter, Display : 4½ Digit, 12.5mm Bright Red LED., Range : 20 A.AC, Resolution : 0.001A, Phase Angle Meter (between any two phases of VoltageCurrent , or between the phases of VoltageCurrent).

Digital Phase Angle Meter

12,000 Per Piece

1 Piece (MOQ)

• Operating Temperature: 0 Deg C to 70 Deg C
• Brand: Cabs Electra
• Input Impedance: 0.002 ohm for current circuit 1 Meg. ohm for voltage circuit
• Control Power: 230 Volt AC +- 10%, 50/60 Hz, 3VA
• Voltage Input: 250 V Max
• Current Input: 7A Max continuous at any current terminal
• CT secondary: 5 Amp or 1Amp (on order)
• Frequency Range: 40-100 Hz
• Storage Temperature: - 20 Deg C to 85 Deg C
• Relative Humidity: 95%
• Dielectric: 2 KV for 1 minute.

Phase Angle Meter

Get Price Quote

• Frequency: 45 to 65Hz
• Usage: Industrial
• Brand: Prestige Electronics
• Display: 4 Digits Red LED
• Range: 0 to 360.0 Degrees
• Resolution: 0.1 Degrees
• Accuracy: 0.5 % +- 1digit (100% -10%), + 0.5% (10% 2%) + 1.5% (> 2%)
• Input Voltage Range: 50 to 500V.AC
• Input Current Range: 100mA to 20A

Phase Angle Meter

Get Price Quote

Phase Angle Meter is a compact direct reading instrument suitable for reading phase angle between voltage-voltage, voltage-current and current-current. In voltage range of 60 of 440 and current range of 1 to 5 Amps. Available in digital and analog read-out it operates on 230V/50Hz

Phase Angle Meter

Get Price Quote

• Application: Industrial
• Brand Name: Megger

Phase Angle Regulator

Get Price Quote

• Application: Thermocouple Calibration Bath ,High / Low temperature Furnace, Heat treatment Oven , molding Machine, Hot Air oven , Heat / cool Chamber, Hot bench, Portable oven etc…

The Tempsen Solid State Relay accept DC voltage ( 4-32 VDC) , Variable current ( 4-20 mA), AC Voltage( 12-230VAC), Variable ohms ( 0-470 K). The SSRPPC soft start , no noise Long life work , use proper heat sink avoid rejection. The SSR work ON OFF mode function only controlled by controller suitable for heater application, the phase angle regulator (PPC)regulate the Voltage suitable for Power variable application that is controlled by pid controller provided Variable current (4-20mA)output suitable for high accuracy heat control The instrument is housed In a compact PVC case . maximum Load capacity 100A single phase , three phase optional

Digital Phase Angle Meter

10,450 Per unit

• Color: Grey
• Display Type: Digital
• Weight: 3 KG
• Weight: SI/DPA
• Usage/Application: Industrial
• I Deal In: New Only
• Features: Handy single phase table top device, LED display
• Auxiliary supply: 230V, 50Hz
• Potential circuit: 110 / 440V AC.
• Current circuit: 1A / 5Amps AC
• Range: Overall size
• 300 x 100 x 150 mm: 3 Kg

Digital 3 Phase Angle Meter

Get Price Quote

• Power: 230V.AC +- 15%, 50Hz
• Frequency: 45 To 65Hz
• Application: Industrial
• Range: 0 to 360.0 Degrees
• Input Voltage Range: 50 to 500V.AC
• Brand Name: Prestige Electronics

FAD 2 - Digital Phase Angle Meter

Get Price Quote

FAD 2 - Digital Phase Angle Meter, Transformer Oil Testing and Oil Analysis

phase angle meters

Get Price Quote

phase angle meters

Digital Phase Angle Meter

Get Price Quote

Digital Phase Angle Meter, Digital Watt Hour Meters, digital preset timer

Digital Phase Angle Meter

Get Price Quote

Digital Phase Angle Meter, grounding system, Fault Passage Indicators

Digital Phase Angle Meter Pme -20-ph

Get Price Quote

Digital Phase Angle Meter Pme -20-ph

Digital Phase Angle Meter

Get Price Quote

Digital Phase Angle Meter, high voltage probe, high voltage switches