Real Switchgears & Cables Pvt. Ltd Bhosari, Pune, Maharashtra

Thermal overload relays are protection devices required in various motor starter combinations. L&T’s range of contactor is complimented with L&T’s range of thermal overload relays. Our relays are available for various DOL/ Star delta combinations. They have built in sensitive mechanism which protects the motor from overload and single phasing. Features of our thermal overload relays: Type RTX & MN-suitable for MNX contactors: Ratings: RTX Relay 0.23A-41A MN Relay 0.2A-570A Inbuilt single phasing protection Suitable for direct/separate mounting Built-in ‘START’ and ‘OFF / RESET’ push buttons Auto and manual reset modes Ambient temperature compensation: -5 C to +55 C Electrically separate NO contact Conformance to IEC 60947-4-1 and IS/IEC 60947-4-1 Type RTO- suitable for MO contactors: Ratings: 0.23A - 110A Phase failure sensitive Visual status indication Sealable transparent cover Auto/manual reset function Ambient temperature compensated Conforms to IEC 60947-4-1 & IS/IEC 60947-4-1

Time delay is independent of normal voltage and temperature fluctuations Black pointer gives clear indication of the time set on the calibrated dial while the red one indicates the time left to complete the cycle Automatic reset on de-energisation of the clutch coil Base mounting or flush mounting versions No-volt feature available

S-D-F range covers ratings from 32A to 800A. S-D-F’s range is available in both open execution & Sheet steel enclosure version (Suitable for 14x51 Cylindrical, DIN, BS type fuse-link) S-D-F range provides users with a high level of safety & Convenience. The complete range conforms to IS/ IEC60947-3 standards. It also carries the CE marking signifying compliance to stringent European safety norms. S-D-F's superior features translate into better safety & convenience for the users. Fuse barriers & Terminal shrouds provide protection against accidental direct contact. Terminal shrouds also protect against phase to phase short circuit through an external conducting path. Double isolation of fuses when S-D-F is in OFF position makes replacement of fuses risk-free. Positive ON / OFF indication ensures that the handle indicates OFF position only when main contacts are actually open. Large ground clearance eliminates possibility of phase to ground flash over. Built-in padlocking arrangement provided to lock the unit in OFF position prevents inadvertent operation of the unit. Versatile handle Door interlock (defeatable) Padlock up to 3 locks Choice of operating quadrant Flexibility (± 3mm mismatch operational quadrant) The Switch-Disconnector-Fuse provides complete Flexibility in mounting; Unit can be mounted at any angle in a vertical plane.

L&T Agriculture Submersible Flat Cables are made of bright, plain multi-strand annealed copper conductor, as per class 5 of IS:8130:1984. These cables are used for Agricultural submersible pump set applications and are available in 3 core - 500 meter & 1000 meter drums. Voltage Grade 1.1 kV (1100 V) conforming to IS:694:1990. L&T XLPE Agricultural Flat Cables - These wires are made of cross-linked polyethylene material with high continuous conductor temperature - 90 C and high intermittent overloading - 130 C. Since it has better corrosion resistance, it is suitable for alkaline hard water areas. Changeover S-D, which can be commissioned in electrical panels are of open execution type and provide IP20 protection from front.  

In an endeavor to bring light to areas facing perpetual power shortages, L&T has developed a unique solar-powered portable lantern D.VA popularly referred to as ‘Diva,’ which is capable of emitting uninterrupted light for up to 10 hours at maximum brightness and as much as 40 hours in night mode, when fully charged. Conceived indigenously by the design team of L&T Electrical and Automation, this rechargeable off-the-grid innovative device offers several significant advantages over conventional solar lanterns. D.VA can be charged through dual modes. Users can either harness sunlight and charge the device through solar panels of 5W rating, or use a regular mains (AC supply) charging adaptor in low or no sunlight conditions. Life span of the solar panels typically ranges between 20 and 25 years, while its high bright LEDs have rated life of up to 50,000 hours. Even with a power consumption as low as 2W, the uniquely designed metalized reflector of D.VA produces an output equivalent to a traditional 25W incandescent bulb or a 5W CFL. Also, its 360-degree uniform illumination is glare free and soothing to the eyes. It is also equipped with salient features such as mobile charging and smart 4 LED battery status indicator. This rechargeable off-the-grid innovative device is the recipient of India Design Council’s India Design Mark award (IMark) for good design.

AC Switch Range : 6 Amps - 400 Amps Touch Proof / Rear Termination / Screwless Terminal switches Mountings : Standard front panel / Rear / 22.5 mm / Din rail / Mix & Match Safety feature : Center Key Lock, Pad lockable, Door Interlock. Custom built switching configuration. DC Switch Range : 16 Amps to 500 Amps upto 250 Volts DC

Type A - Snap fit cover Type B - Non slip cover & Positive locking Wide range of sizes from (15 x 15 mm) upto (150 x 150 mm) Various slotting styles - Standard, Thin, Oblong, Circular etc. Various Colour options & Custom built profiles can be offered WFlame retardant UL V0 material RoHS & Halogen Free Ducts are also available

L&T offers a complete solution for your control panel accessory requirements. Timers and supply monitoring devices find their use in a wide variety of applications in the industry. L&T's reliable Timing devices and Supply monitors from GIC over the past four decades have provided the best solutions to its customers. Remote control units play a crucial role on factory shop floor for operational safety and reliability. Reliable push buttons and indicators from ESBEE, have been trusted by users across industries for over 4 decades. CAM operated rotary switches from Salzer are used to perform make and break operation in a sequential way by rotating the switch to different positions. The versatility in terms of mounting options, knobs and colours are offered. We manufacture a wide range of Digital Panel meters at our Mysore Campus which is equipped with latest test facilities. The comprehensive range of single function, multifunction and energy meters is suitable for industries and commercial establishments.

L&T’s Supernova series motor protection circuit breaker (MPCB) integrates functions of a MCCB and thermal overload relay into a highly compact single unit. Equipped with a wide range current adjustment dial (with maximum/minimum ratio of 1.4 to 1.6), the MPCB easily adjusts to match the rated current of the motor, for optimum protection. MPCB provides protection against short circuit & overload. Also the compact size of the MPCB, including overload relay functions, enables a smaller installation area with less wiring space, for a reduction in panel size. Features: Compactness High Breaking Capacity Short circuit protective coordination Reduction in wiring work Ecological design standards Standard accessories for all frames of MPCB Wide range of accessories which suits your requirements IP20 terminal cover prevents accidental contact to electrically charged part Accessories: Auxiliary contact blocks Alarm contact blocks Auxiliary and alarm contact blocks Short-circuit alarm contact block Shunt trip devices Undervoltage trip devices External operating handles

Compact 17.5mm wide Brown Out Timer with 2 Functions: ON Delay, Interval Detects Voltage Dips and Momentary Loss of Supply & Resets the control panel Low Power Consumption Fast Response Time LED indications for Healthy & Unhealthy conditions Excellent Noise Immunity to the latest IEC standards

Load Break (Isolator) range from 16 - 125 Ampere Upto 8 pole can be offered Multiple mounting options ABS / Aluminum / sheet steel enclosures Add on pole - Power / Neutral and Auxiliary pole can be offered Changeover switches upto 4 pole from 25 to 125 Amps

HRC Fuse Link range covers ratings from 2A to 800A. HRC Fuse-link range is available in 14x51 Cylindrical, DIN and BS type High breaking capacity: 80kA for Cylindrical & BS Type & 100kA for DIN Type The complete range conforms to IS 13703 (Part 2) / IEC 60269-2 standards Let-through energy value of L&T’s fuse is extremely low; it leads to optimal selectivity for the cable size & downstream protection devices. Low power loss also leaded to low running cost & minimum heating. Fuse blown indication is available through a red pop-up indicator Suitable fuse base & fuse pulling handle are also available

Over the years, L&T has earned a place amongst the leading low voltage switchgear manufacturers of the world. It has the scale, sophistication and range to meet global benchmarks. It has been offering Air Circuit Breakers (ACBs) for the last 45 years and has a rich experience of electrical fields. Electrical power is the lifeline of industry, but it is unpredictable. Just like an ocean, it can be calm one moment and turbulent the next. You cannot predict the next course of electrical turbulence. That’s where our highly sophisticated OMEGA ACBs can make a world of difference. OMEGA ACBs are the next generation breaker with advanced protection features. This product was Awarded as the 'Best Product' at Elecrama.

Compact 17.5 mm Wide Multi Function: (8 or 18) Non Signal & Signal based functions Multi-Voltage: 24 - 240 VAC/DC Wide Timing Range: 0.1s to 999 Hr 3 Digit LCD for Preset time and Run time Option to select Up/Down counting Tamper proof with key lock feature

The comprehensive range of contactors from L&T Switchgear is your key to meet every demand and suit every requirement across diverse applications. Whether it is motor control, capacitor switching, supply changeover or any other single phase or three phase application, you can always be assured of finding a perfect solution in our extensive range of contactors. These contactors are complimented with a range of thermal overload relays. To complement these products, we also have a wide range of accessories like thermal overload relay, surge suppressor and mechanical interlock kits. Our range includes Power contactor – MO, MNX, MCX, ML Control and mini contactor- MX, MN0 Capacitor duty contactor- MO C, MR

C-line offers you a unique series of changeover Switches combining compactness with high performance & Customer convenience, thus making C-line a state-of-the-art product in changeover technology. The C-line range covers ratings from 63A to 2000A in 6 frame sizes. Changeover Switches are available in open execution, Sheet steel enclosure, fused version (Suitable for DIN type fuse – link ) and motorised version. The complete range conforms to IS/ IEC60947-3 standards. It also carries the CE marking signifying compliance to stringent European safety norms. Versions: Open execution Changeover S-D: Changeover S-D, which can be commissioned in electrical panels are of open execution type and provide IP20 protection from front. Changeover S-D in Sheet Steel Enclosure: Changeover S-D’s are available in Sheet Steel enclosure with adequate Space for cable terminations so that additional cable entry boxes are not required. Cable gland plates are also provided with the switch. Enclosure provides IP 54 protect. Changeover S-D suitable for HRC fuses: The Changeover S-Ds for open execution can be easily converted to fused version at site by using fuse conversion kit. It provides the benefits of overload and short circuit protection through the fastest switching device-fuse, and is suitable for cylindrical & knife type (DIN) fuse links. Motorised Changeover S-D: Changeover S-Ds are available in Motorised version with control voltage 240 Vac. Manual Changeover switch can be easily replaced by Motorised Changeover without changing any of the electrical panel dimension.

L&T offers you a wide range of Power factor Correction Relays suitable for all standard applications. Their intelligent adjustment interface ensures balanced usage of capacitors based on the number of switching operations and the connection time of each step, thus ensuring long life for switchgear and capacitors. etaCON L Series: Available steps: 3, 5, 7, 8, 12 Compact size (96 × 96 mm) in 3, 5, 7 steps version Automatic recognition of current flow direction Auto / Manual Control Online display of PF, Voltage, Current, kVAr, capacitor overload and Panel temperature Average weekly power factor measurement Capacitor over-current and panel over-heating protection No-voltage release protection function Last two can be programmed for Capacitor switching / Alarm / Fan Control Keypad locking function

Over the years, L&T has earned a place amongst the leading low voltage switchgear manufacturers of the world. It has the scale, sophistication and range to meet global benchmarks. It has been offering Air Circuit Breakers (ACBs) for the last 45 years and has a rich experience of electrical fields. L&T offers ACBs with current ratings ranging from 400A to 6300A and breaking capacities ranging from 50kA to 100kA. It also offers advanced micro-processor based releases with high end protection and unmatched safety features. Control at your fingertips through versatile communication options and Common Area Network (CAN) controlled modules. Benefit of total system compliance with all the relevant quality, safety and environmental standards. Reliable after-sales service backed by rich experience spanning over 5 decades.

The 3 Phase CT Operated Trivector Meter is designed for metering of HT/LT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports Features: Class 0.2s, 0.5s, 1.0 as per relevant IS and IEC Standards 1A and 5A current rating 3 Phase 4 Wire/3 Phase 3 Wire system Anti-tamper features Self-diagnostic capability Multiple tariff / Time of day feature Upto 3 Maximum Demand registers Load Survey (Interval Data) features Upto 12 reset backups Optical port/RS 232/RS485 (optional)