Utiliti Controls Deonar, Mumbai, Maharashtra

We are offering thermal trip (sn-24) prevents overload, locked rotor and short circuit. Since the protecting devices are sensitive to both temperature and current they inherently protect against a variety of abnormal conditions while allowing maximum motor output before shutdown. Motor life is extended by limiting the damaging temperatures to a designed level. The sn-24 is basically a bimetallic thermostat with a built–in heating element which is installed in series with the motor winding. The actuating element is a snap–acting thermal disc. The built–in heater simulate winding temperature caused by increase in current. This protector provides crisp, positive switching when the specified trip current is sustained for a specific duration. The device will also actuate when an excessive ambient temperature condition occurs, providing protection against overheat conditions other than overload. sn-24 motor protector prevents overload, locked rotor and short circuit. Since the protecting devices are sensitive to both temperature and current they inherently protect against a variety of abnormal conditions while allowing maximum motor output before shutdown. Motor life is extended by limiting the damaging temperatures to a designed level. the sn-24 is basically a bimetallic thermostat with a built–in heating element which is installed in series with the motor winding. The actuating element is a snap–acting thermal disc. The built–in heater simulate winding temperature caused by increase in current. This protector provides crisp, positive switching when the specified trip current is sustained for a specific duration. The device will also actuate when an excessive ambient temperature condition occurs, providing protection against overheat conditions other than overload. features single phase protectionlocked rotor protectionthermal protectionshort circuit protection applications 1 phase motorsair conditionersrefrigerator motorsother home appliances rating rated voltage rated current : 230vac, 2a to 36aoperating cycles : 10,000 cycles maximum temperature : 160oc operating range : 50oc - 160oc setting tolerance : +- 5% differential : 15-25oc selection sn-24 graph the characteristic graph shows that as there is any over-load, lock-rotor in the motor the sn-24 opens the contact within 4-7 sec. And protects the motor.

Thermal Trip (SN-24) prevents overload, locked rotor and short circuit. Since the protecting devices are sensitive to both temperature and current they inherently protect against a variety of abnormal conditions while allowing maximum motor output before shutdown. Motor life is extended by limiting the damaging temperatures to a designed level. The SN-24 is basically a bimetallic thermostat with a builtin heating element which is installed in series with the motor winding. The actuating element is a snap�acting thermal disc. The builtin heater simulate winding temperature caused by increase in current. This protector provides crisp, positive switching when the specified trip current is sustained for a specific duration. The device will also actuate when an excessive ambient temperature condition occurs, providing protection against overheat conditions other than overload. SN-24 motor protector prevents overload, locked rotor and short circuit. Since the protecting devices are sensitive to both temperature and current they inherently protect against a variety of abnormal conditions while allowing maximum motor output before shutdown. Motor life is extended by limiting the damaging temperatures to a designed level. The SN-24 is basically a bimetallic thermostat with a built�in heating element which is installed in series with the motor winding. The actuating element is a snap�acting thermal disc. The built�in heater simulate winding temperature caused by increase in current. This protector provides crisp, positive switching when the specified trip current is sustained for a specific duration. The device will also actuate when an excessive ambient temperature condition occurs, providing protection against overheat conditions other than overload. Features Single phase protection Locked rotor protection Thermal protection Short circuit protection Applications 1 phase Motors Air conditioners Refrigerator motors Other home appliances Rating Rated Voltage Rated Current : 230VAC, 2A to 36A Operating Cycles : 10,000 cycles Maximum Temperature : 160oC Operating Range : 50oC - 160oC Setting Tolerance : +/- 5% Differential : 15-25oC Selection SN-24/ Graph The Characteristic graph shows that as there is any over-load, lock-rotor in the motor the SN-24 opens the contact within 4-7 sec. and protects the motor.

Shape : Rectangular

Use : Industrial

Finishing : Polished

Total Carbohydrate : 6 Months

The SN-2 delivers the maximum protection in the smallest package at an excellent price. It’s the most reliable on the market, backed by the leading innovators in protection technology. Each SN-2 has a bimetal disc specifically manufactured for each rating. Each device is then calibrated and checked for opening temperature. This results in optimum snap–acting open and reset characteristics necessary to achieve consistent performance over the required cycle life. The   SN-2 protector is our most popular product, and it is 4.7 mm thick with contact rating of up to 12 Amps.Features Compact Design Current and Temperature Sensitive  Quick and Accurate Action  Sealed steel case suitable for impregnation  Polyester heat shrink sleeve for good electrical insulation as well as good thermal conduction. Applications Pump sets Electric Motors Transformers Solenoids Rechargeable Battery Packs Fluorescent Lighting Ballasts

Number Of Flower : Overload Protector

Availability : 0-100gm, 100-200gm

Packaging Type : Metallic

Country of Origin : 0-12Volts

Automatic Grade : Automatic

Power : 0-100W

Driven Type : Electric

Total Carbohydrate : 1 Year

We are among the most renowned Manufacturers, Suppliers and Exporters of Thermal Fuses. Thermal Fuses cut off the heater when the temperature reaches a specified level. Thermal Fuses offered by us are highly appreciated by many customers for its fast heat response, electrically insulated mounting bracket and low cost. Thermal Fuses are used in end number of electronic applications such as electric heater, electric iron, electric stove and many more. The thermal fuses/cutoffs are widely used for security to prevent damage of device due to the rise in the ambient temperature. The sensing element of a thermal fuse is a eutectic alloy. It melts at a required fusing temperature. It actuates the switch and protects the equipment from overheating. It is one shot device and cannot be restarted. Features Ove shot Device Fast Heat response Electrically insulated mounting Bracket Low cost Applications Heating appliance Electric heater Electric iron Electric stove Kitchen appliances Electric rice cooker Electric oven,electric pot,juicer, etc

Material : Thermal

Packaging Type : Metallic

Application : Over Temperature Protection, Temperature Measurement

Driven Type : Electrical

Total Carbohydrate : 1year

We are a prominent manufacturer, supplier and exporter of slim thermostat (sn-4). Because of its slim design slim thermostat (sn-4) can be easily mounted on places where less space is required. the slim series of bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design. The snap-action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 4 amps at 230vac (100,000 cycles). The quality, reliability, affordability, versatility of the slim series makes it the thermostat of choice for a wide variety of temperature control applications. sn-4 of utiliti controls is a product which is the slimest of disc thermostats. It is just 4 mm thick. It is just 18.2mm x 12.4 mm in size. 100% factory inspected for continuity, function and contact resistance pps( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength, low static generation. features snap action dischigh thermal sensitivitylow costlong contact lifecompact, slim design applications electrical heating padselectrical blanketswax heatersfood warmersmilk bottle warmersheat sink protectionother small appliances rating maximum voltage : 230vacmax current( for non-inductive loads) : 4amax temp : 160 deg cmax operating cycles : 1,00,000 we also provide this model for inductive loads for bulk orders characteristics dielectric strength : 1500 vac, rms, 60 cycles for 1 minute, terminal to caseambient temperature range : 50oc to 160ocdifferential : 10 deg, 15 deg, 20 deg configurations sn-4 comes in a standard m0 cover made up of stainless steel terminals the sn-4 comes with a stanndard terminal which can crimped to a wire. s : standard terminaln : flat type terminals terminal direction the standard terminal can be riveted in two ways. n : terminal flanges at the topr : terminal flanges at the bottom selection code sn-4nc(8)110(3)100(5)s(n) temperature setting can be given as per requirement

We are a prominent Manufacturer, Supplier and Exporter of Slim Thermostat (SN-4). Because of its Slim Design Slim Thermostat (SN-4) can be easily mounted on places where less space is required. The Slim series of bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design. The snap-action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 4 amps at 230VAC (100,000 cycles). The quality, reliability, affordability, versatility of the Slim Series makes it the thermostat of choice for a wide variety of temperature control applications. SN-4 of Utiliti controls is a product which is the slimest of disc thermostats. It is just 4 mm thick. It is just 18.2mm X 12.4 mm in size. 100% factory inspected for continuity, function and contact resistance PPS( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength, low static generation. Features Snap action disc High thermal sensitivity Low cost Long contact life Compact, slim design Applications Electrical Heating Pads Electrical Blankets Wax Heaters Food Warmers Milk Bottle Warmers Heat sink protection Other Small Appliances Rating Maximum Voltage : 230VAC Max Current( For non-inductive loads) : 4A Max Temp : 160 Deg C Max operating cycles : 1,00,000 We also provide this model for inductive loads for bulk orders Characteristics Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case Ambient Temperature Range : 50oC to 160oC Differential : 10 deg, 15 deg, 20 deg Configurations SN-4 comes in a standard M0 cover made up of stainless steel Terminals The SN-4 comes with a stanndard terminal which can crimped to a wire. S : Standard terminal N : Flat type terminals Terminal direction The standard terminal can be riveted in two ways. N : terminal flanges at the top R : Terminal flanges at the bottom Selection Code SN-4/NC(8)/110(3)/100(5)/S(N) Temperature setting can be given as per requirement

Number Of Flower : Thermostats

Material : Plastic

Application : Clinical Use, Monitor Temprature

Certification : CE Certified

Length : 10-15cm, 15-20cm, 5-10cm

Display Type : Digital

Width : 30-40mm, 40-50mm

We are one of the leading Manufacturers, Exporters and Suppliers of Motor Protector (SN-1). The Motor Protector (SN-1) is a flexible protection device and is available at affordable process. The Motor Protector (SN-1) is used extensively used in various applications such as electric motor, battery pack and electrical windings. The Utilitis SN-1 delivers the maximum protection in the smallest package at an excellent price. It�s the most reliable on the market, backed by the leading innovators in protection technology. Each SN-1 temperature rating has a bimetal disc specifically manufactured for that rating. Each device is then calibrated and checked for opening temperature. This results in optimum snap�acting open and reset characteristics necessary to achieve consistent performance over the required cycle life.  The Utilitis bimetal disc welded in a steel can provides excellent thermal sensitivity and maximum protection properties.  Features Compact, miniature size Individually temperature checked on modern, custom-designed equipment Positive make and break with snap�action disc Repeatable temperature performance over life Gasketed PPS case suitable for most impregnation processes Current and temperature sensitivity for maximum design flexibility and application Wide selection of leads Applications Shaded pole motors Permanent split capacitor motors Fluorescent lighting ballasts HID ballasts Recessed lighting fixtures Battery packs Vacuum cleaners Washers and dryers Dishwashers Transformers Automotive accessory motors Solenoids PC boards Lighting Protection The SN-1 thermal protector is the world leader for protection in lighting applications. Offering extremely high reliability and performance at an economical cost, the SN-1 protector is ideal for fluorescent lighting ballasts, HID ballasts, recessed lighting fixtures, and other lighting products that require protection against overheating.  Electrical and Thermal Protection Utiliti Controls SN-1 is one of the lowest cost, most versatile protection devices on the market. This compact device combines temperature and current into a package designed to protect electric motors, transformers, recessed lighting, fluorescent ballasts, and battery packs. It is available in a wide variety of wire lead configurations, which can be customized for ease of installation. The SN-1 series of protectors offers rechargeable battery-pack protection with Utilitis dual�function over temperature as well as short circuit bimetal protectors that are self�resetting. The SN-1 series are typically used for protecting battery charger outputs and high-current battery packs (ie. Military, UPS). The SN-1 can handle up to 16VDC and 12 amps under certain conditions and is available with a wide variety of open temperatures and short circuit sensitivities.  Motor Protection The universal SN-1 series motor protector is our most popular product, and though it is slightly larger than the 8mm it has a contact rating of up to 12 amps Selection Code SN-1/NC(8)/110(5)/90(10)/XLPE(70) XLPE cable of standard 70mm length Other lengths available upon request.

Certification : ISI Certified

Packaging Type : Metallic

Country of Origin : 0-12 VDC

Frequency : 50Hz

Phase : Single Phase

Current Range : 0-60 Amps

Temperature : 0-100 ºC

 Type : Motor Protector

  Warranty : 1Year

We are one of the leading manufacturers, exporters and suppliers of motor protector (sn-1). The motor protector (sn-1) is a flexible protection device and is available at affordable process. The motor protector (sn-1) is used extensively used in various applications such as electric motor, battery pack and electrical windings. The utilitis sn-1 delivers the maximum protection in the smallest package at an excellent price. It’s the most reliable on the market, backed by the leading innovators in protection technology. each sn-1 temperature rating has a bimetal disc specifically manufactured for that rating. Each device is then calibrated and checked for opening temperature. This results in optimum snap–acting open and reset characteristics necessary to achieve consistent performance over the required cycle life.  the utilitis bimetal disc welded in a steel can provides excellent thermal sensitivity and maximum protection properties. features compact, miniature sizeindividually temperature checked on modern, custom-designed equipmentpositive make and break with snap–action discrepeatable temperature performance over lifegasketed pps case suitable for most impregnation processescurrent and temperature sensitivity for maximum design flexibility and applicationwide selection of leads applications shaded pole motorspermanent split capacitor motorsfluorescent lighting ballastshid ballastsrecessed lighting fixturesbattery packsvacuum cleanerswashers and dryersdishwasherstransformersautomotive accessory motorssolenoidspc boards lighting protection the sn-1 thermal protector is the world leader for protection in lighting applications. Offering extremely high reliability and performance at an economical cost, the sn-1 protector is ideal for fluorescent lighting ballasts, hid ballasts, recessed lighting fixtures, and other lighting products that require protection against overheating. electrical and thermal protection utiliti controls sn-1 is one of the lowest cost, most versatile protection devices on the market. This compact device combines temperature and current into a package designed to protect electric motors, transformers, recessed lighting, fluorescent ballasts, and battery packs. It is available in a wide variety of wire lead configurations, which can be customized for ease of installation. The sn-1 series of protectors offers rechargeable battery-pack protection with utilitis dual–function over temperature as well as short circuit bimetal protectors that are self–resetting. the sn-1 series are typically used for protecting battery charger outputs and high-current battery packs (ie. Military, ups). The sn-1 can handle up to 16vdc and 12 amps under certain conditions and is available with a wide variety of open temperatures and short circuit sensitivities. motor protection the universal sn-1 series motor protector is our most popular product, and though it is slightly larger than the 8mm it has a contact rating of up to 12 amps selection code sn-1nc(8)110(5)90(10)xlpe(70)xlpe cable of standard 70mm length other lengths available upon request.

We are offering miniature thermostat. we are one of the foremost manufacturer, exporter and supplier of miniature thermostat (sn-9). The miniature thermostat (sn-9) provides high speed contact separation resulting in outstanding life cycle characteristics at electrical loads up to 8 amps. The miniature thermostat (sn-9) offered by us are well known for their reliability, compact size, versatile and cost effective design. sn-9 of utiliti controls is a product which is the smallest of disc thermostats. It is just 5mm x 14.5 mm in size. 100% factory inspected for continuity, function and contact resistance. Pps( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength. designed for single- and three–phase motors. Protects against overheating on all running conditions including: running overloads, increased ambient temperature, blocked motor ventilation, line voltage fluctuation, locked rotor, short circuit conditions etc. motor protection as a motor winding thermostat, the sn-9 can be mounted conveniently on the end turns of the motor windings. The small size and variety of available brackets afford flexibility in the method of attaching the thermostat. the hermetic construction allows the thermostat to withstand dipping and baking operations on the windings.   automatic and manual reset automatic or manual reset systems may be obtained using these thermostats with either manual or automatic type motor starters. When more than one motor winding thermostat is used, they should be connected in series so that the opening of any one thermostat will actuate the controller and shut down the motor. features small in sizehigh current carrying capacity of 10a at 230vresistant to shocks and vibrationssnap action dischigh thermal sensitivitylow costlong contact lifecompact, slim designavailable with without mounting bracket applications electrical heating padselectrical blanketswax heatersfood warmersmilk bottle warmersheat sink protectionother small applianceswater temperature controlbattery packsmedical equipmentdental equipment  rating maximum voltage : 230vacmax current( for non-inductive loads) : 8amax temp : 160 deg cmax operating cycles : 1,00,000 we also provide this model for inductive loads for bulk orders. characteristics dielectric strength : 1500 vac, rms, 60 cycles for 1 minute, terminal to caseambient temperature range : 10 deg, 15 deg, 20 deg, 50oc to 160ocdifferential : 15 deg, 20 deg, 40 degcontact resistance : 1250 vac, rms, 60 cycles for 1 minute, terminal to case, per mil-std-202, method 301dielectric strength : 5–2000 hz, 20g, per mil-std-202, method 204 condition d (unmonitored) (for high vibration applications, refer to the m1)vibration resistance : 100g, 6 milliseconds, per mil-std-202, method 213shock resistance configurations sn-9 comes in a standard m0 cover made up of aluminium mounting style m0 : without bracketp : pps bracket for surface mountingb : mild steel brackett : teflon wire crimped terminals the sn-9 comes with a stanndard terminal which can crimped to a wires : standard terminal selection code sn-9nc(8)110(3)100(5)sm0t70 temperature setting can be given as per requirement

We are one of the foremost Manufacturer, Exporter and Supplier of Miniature Thermostat (SN-9). The Miniature Thermostat (SN-9) provides high speed contact separation resulting in outstanding life cycle characteristics at electrical loads up to 8 amps. The Miniature Thermostat (SN-9) offered by us are well known for their reliability, compact size, versatile and cost effective design. SN-9 of Utiliti controls is a product which is the smallest of disc thermostats. It is just 5mm X 14.5 mm in size. 100% factory inspected for continuity, function and contact resistance. PPS( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength. Designed for single- and three�phase motors. Protects against overheating on all running conditions including: running overloads, increased ambient temperature, blocked motor ventilation, line voltage fluctuation, locked rotor, short circuit conditions etc. Motor Protection As a motor winding thermostat, the SN-9 can be mounted conveniently on the end turns of the motor windings. The small size and variety of available brackets afford flexibility in the method of attaching the thermostat. The hermetic construction allows the thermostat to withstand dipping and baking operations on the windings.   Automatic and Manual Reset Automatic or manual reset systems may be obtained using these thermostats with either manual or automatic type motor starters. When more than one motor winding thermostat is used, they should be connected in series so that the opening of any one thermostat will actuate the controller and shut down the motor. Features Small in size High current carrying capacity of 10A at 230V Resistant to shocks and vibrations Snap action disc High thermal sensitivity Low cost Long contact life Compact, slim design Available with / without mounting bracket Applications Electrical Heating Pads Electrical Blankets Wax Heaters Food Warmers Milk Bottle Warmers Heat sink protection Other Small Appliances Water Temperature Control Battery Packs Medical Equipment Dental Equipment   Rating Maximum Voltage : 230VAC Max Current( For non-inductive loads) : 8A Max Temp : 160 Deg C Max operating cycles : 1,00,000 We also provide this model for inductive loads for bulk orders. Characteristics Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case Ambient Temperature Range : 10 Deg, 15 Deg, 20 Deg, 50oC to 160oC Differential : 15 Deg, 20 Deg, 40 Deg Contact Resistance : 1250 VAC, rms, 60 cycles for 1 minute, terminal to case, per MIL-STD-202, Method 301 Dielectric Strength : 5�2000 Hz, 20G, per MIL-STD-202, Method 204 Condition D (unmonitored) (For high vibration applications, refer to the M1) Vibration Resistance : 100G, 6 milliseconds, per MIL-STD-202, Method 213 Shock Resistance Configurations SN-9 comes in a standard M0 cover made up of aluminium Mounting Style M0 : Without bracket P : PPS Bracket for surface mounting B : Mild steel Bracket T : Teflon wire crimped Terminals The SN-9 comes with a stanndard terminal which can crimped to a wire S : Standard terminal Selection Code SN-9/NC(8)/110(3)/100(5)/S/M0/T/70 Temperature setting can be given as per requirement

Number Of Flower : Thermostats

Material : Plastic

Application : Clinical Use, Monitor Temprature

Length : 10-15cm, 15-20cm

Packaging Type : Metallic

Width : 30-40mm

Feature : Anti Bacterial, Durable

We are a chief Manufacturer, Exporter and Supplier of Manual Reset Thermostat (SN-8M). The Manual Reset Thermostat (SN-8M) is just like SN-8 with a reset button. The Manual Reset Thermostat (SN-8M) offered by us provides excellent reliability to commercial applications such as vending machine, photo copiers, boiler, etc. SN-8M is a model which operates within a temperature range of 160 deg C. It is manually reset. 100% factory inspected for continuity, function and contact resistance and temperature High temp plastic base provides : high temperature capability, clean processing, high impact strength Factory pre�set bimetal disc ensures : safe and reliable accurate operation, tamperproof settings Features Manual reset for safety High current capacity Automatic cut-off in case of overheating High thermal sensitivity Variety of mounting brackets and terminals available Long contact life Applications Printed Circuit Boards Vending Machines Water Heaters Vacuum Cleaners Boilers Photo Copy Machines Electrical Stoves Other Small Appliances Rating Maximum Voltage : 230VAC Max Current ( For non-inductive loads) : 16A Max Temp 160 : Deg C Max operating cycles : 1,00,000 We also provide tthis model for inductive loads for bulk orders. Characteristics Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case Ambient Temperature Range : 50oC to 160oC Differential : 10 deg, 15 deg, 20 deg Configurations Our most common configurations are depicted below, but many other styles are available The SN-8M can be custom packaged to meet your specific design requirements Terminals 3/16 or 6.35 type terminals are available which can be riveted flat or vertical 1/4 or 4.6 type terminals are available which can be riveted flat or vertical Mounting style M0 - No mounting M6 - Loose Bottom Bracket M4 - stud type mounting M2 - Fixed top flange M7 - fixed top flange The drawings of the mounting bracket is shown. Any terminal style may be matched with any mounting style. Selestion Code SN-8M/NC(8)/110(3)/0/M6/6.35/F Temperature setting can be given as per requirement

Number Of Flower : Reset Thermostat

Material : UPVC

Application : Clinical Use, Monitor Temprature

Certification : CE Certified

Length : 10-15cm

Packaging Type : Available in Many Colors

Temperature Range : 10-50C, 100-150C

Feature : Easy To Use, Hygenic

We are a supreme manufacturer, supplier and exporter of dc motor protector (sn-25). The sn-25 series is a high current motor protector which delivers the benefit of locked rotor and overload protection in a robust integrated package. the sn-25 series has been designed to offer protection for a wide range of 12 volt to 48 volt applications in a minimum package size. The sn-25 series is suitable for both intermittent and continuous rated motors. The sn-25 is also designed for manual switching operations. The sn-25 is physically small and has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. Has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. features tin plated steel base and tab available in covered and uncovered versions designed to trip time or temperature specifications multiple bimetallic resistivities available applications over current and temperature protection in dc motors refrigerator compressors dc blowers engine cooling fan motors pump motor window lift motors front and rear wiper motors sun roof motors adjuster motors antenna lift motors door lock actuators wiper motors sliding door motors rating nominal operating voltage : 12-48 volts dc typical voltage drop at operating current : 200 mv max cut-off temperature range : 60oc to 166oc operating trip current range : 10-125 amps selection code sn-25nc( graph the current vs trip time graph shows that whenever there is a locked rotor condition and the current exceeds 2.5 times the rated current the circuit is opened by sn-25 within 4-7sec without harming the motor.

The SN-25 Series is a high current DC motor protector which delivers the benefit of locked rotor and overload protection in a robust integrated package. A broad range of design and mounting options enable this device to be custom engineered to meet your needs.The SN-25 Series has been designed to offer protection for a wide range of 12 volt to 48 volt applications in a minimum package size. The SN-25 Series is suitable for both intermittent and continuous rated motors. The SN-25 is also designed for manual switching operations. The   SN-25 is physically small and has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life.Features Tin plated steel base and tab. Available in covered and uncovered versions Designed to trip time or temperature Multiple bimetallic resistivities available.

Certification : CE Certified

Packaging Type : Metallic

Frequency : 50Hz

Phase : Double Phase, Single Phase

Current Range : 0-60 Amps, 120-180 Amps

Temperature : 0-100 ºC

  Warranty : 1Year

Our team members make it possible to conduct online transactions, keeping the details confidential. Our transactions are completely crystal clear and thus, you can trust on us. We are a distinguished name in the domain and are placed in mumbai(india) from where we operate.

We are a prime Manufacturer, Exporter and Supplier of Bimetallic Thermostats. The Bimetallic Thermostat offered by us is safe to use and is of superior quality. We ensure all the raw materials used in the manufacturing of Bimetallic Thermostat are of high quality so as to provide our customers with the best products available in the industry. Bimetallic Thermostats are used in numerous applications. Used in variety of applications these bimetallic thermostats are safe to use and can be customized as per the requirements of the customers. Our Bimetal thermostat products are individually calibrated and tested to meet both thermal and electrical characteristics. The bimetal strip serves as the actuating element in these rugged, precision thermostats. This bimetal thermostat is individually calibrated and tested to meet both thermal and electrical characteristics. The single contact switch arm assembly minimizes failures due to contact contamination, while the silver contacts assure long life and excellent current carrying capacity. The bimetal is used as a temperature response element hence it senses heat and gets difflected. This deflection is used to actuate the switch at a predefined temperature. This thermostat has snap acting switch mechanism. The thermostat resets when the temperature reaches its restart level. Adjusting screw is used to change the actuating temperature. Mounting M4 screw Features Adjustable or pre-set fixed temperature models Easy mounting with a single screw Narrow differential temperature Constient temperature VS Anle correlation Good heat transfer to Bimetal Customer design spindle and terminal for Bulk Orders Applications Heater Fans Dry and Steam Irons Countertop Cooking Appliances Laminating Equipment Water heaters Air-Flow Sensing Applications   Specifications   Rated Current AC 250V/10A, AC 125V/15A Endurance test 50,000 cycles Max Service Temperature 350o C (Designed by user's requirements) Operating Temp Range 0-350 Deg C Temperature Tolerance ± 10oC Terminal Screw or push on terminal Reset Temperature 5o C-30o C   We can develop any customized design of Themostat for bulk orders.

Number Of Flower : Thermostats

Material : Metal

Application : Clinical Use, Monitor Temprature

Length : 10-15cm

Packaging Type : Metallic

Width : 30-40mm

Feature : Durable, High Accuracy

A snap-acting bimetal disc serves as the actuating element in these rugged, precision thermostats. As the temperature reaches the tamper-proof predetermined set point, the disc snaps to provide rapid, positive contact action minimizing radio frequency interference and ensuring high reliability. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. Many terminations and mounting assemblies are available to permit great flexibility in installation.Features As per international design  High current capacity  Temperature control and overheating protection  High thermal sensitivity  Available in plastic and ceramic base Automatic, one shot, manual reset modes available Variety of mounting brackets and terminals available  Long contact life Applications Rice Cookers Water Heaters Vacuum Cleaners Coffee Makers Microwave Ovens Dish Dryers

Number Of Flower : Auto Thermostat

Material : Plastic

Application : Clinical Use, Monitor Temprature

Length : 10-15cm, 15-20cm, 5-10cm

Packaging Type : Metallic

Width : 30-40mm, 40-50mm

Temperature Range : 10-50C, 100-150C

Feature : Anti Bacterial, Durable