Bearings Dealers in Agra

Single or multistage centrifugal pumps in pump shroud or in ring section design. Radial or mixed flow hydraulic systems; Suction casing fitted between motor and pump. A suction casing is fitted between the pump & motor. Suction casing is fitted with strainer to protect the pump from coarse particles sand in the fluid. Pumps with check valve (non-return valve) in option are supplied. Available with threaded particularly suitable for vertical installation in narrow deep wells.

tapered roller bearings are bearings that can take large axial forces (i.e., tapered roller bearings are good thrust bearings) as well as being able to sustain large radial forces. The inner and outer ring raceways of these tapered roller bearings are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. We are among the highly-recommended manufacturers and wholesale suppliers of tapered roller bearings. features cutting-edge technologysmooth-finish minimum order quantity : 50

As per the variegated application requirements of clients, they can avail from us a quality range of Hyper steel grinding Media Balls and Cylpebs in various diameters and technical specifications. These grinding media balls and cyplebs are widely utilized in grinding and milling applications. Specifications: Chemical composition: The chemical composition of the grinding media is in accordance with IS 6079-1989 Hardness: When tested in accordance with IS 1500/1983, the hardness is found to be more than 375 BHN Microstructure: Microstructure is free from continuous carbide network Heat treatment: The grinding media is heat treated to obtain the required hardness and microstructure Balls diameter (mm) – 125, 100, 90, 80, 75, 70, 65, 60, 50, 40, 30, 25, 20, 17, 15 Cylpebs (mm) – 35 x 35, 25×25, 22×22, 19×19 Hardness: When tested in accordance with IS 1500/1983 the hardness at any point across the section of the ball is more than 375 BHN. Microstructure: Microstructure shall be free from continuous carbide network. Heat treatment: The grinding media is suitably heat treated to obtain the required hardness and Microstructure. Standard size of grinding media: Balls diameter (mm)-125, 100, 90, 80, 75, 70, 65, 60, 50, 40, 30, 25, 20, 17, 15 Cylpebs (mm)-35 x 35, 25×25, 22×22, 19×19

Voltas 5H 5F CR Bearings, Connecting Rods, Connecting Rod Kgk, Bronze Bushe

Bush Bearings, Cast Iron Castings, Cylinder Blocks, Piston

Gunmetal Bearings, Sleeves, Piston, Aluminium Bushes, Cylinder Block

Engine Bearing, Suspension Bushes, Engine Valves, Oil Seals, Thrust Washer

Metal Balls, Ball Chains, Nose Rings, Anklet Chain

Bimetal Bearings, Engine Valves, Brake Pads, Bimetal Strips, Bimetal Bushe

Engine Bearings, Engine Bushes, Piston, Piston Pin, Piston Rin

Magnetic Bearings, Carbon Bushe

Bearing, Truck Parts, Leaf Springs, Brake Drums, Auto Clutche

Ceramic Tile, Cast Iron Boring Scrap, Cast Iron Turning Scra

Hanger Bearing, Wooden Base Brush, Strip Brush, Metal Pulley, Split Pulle

Auto Bearing, Auto Parts, Automotive Parts, Auto Component

Needle Cage Bearings, Ball Racer, Level Brake Cam

Automobile Dynamic Bearings, Automobile Filters, Automobile Gas Ki

Engine Bearings, Bushes, Thrust Washers, Oil Seals, Roller Bearing

Piston, Clutch Plate, Pressure Plat