Motor Details
Motor body-Non magnetic Stainless steel
Thrust Bearing Self align carbon v/s stainless steel thrust bearing which withstands high axial thrust Load in water lubncation
Bearing: SKF beanng no need external lubricants Cable Sealing, Water protecting device to assure
Cable Sealing : Water protecting device to assure outside Material does not enter into motor
Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
Stator : Insulating warmish using vacuum impregnation method
Rotor : Aluminum pressure die cast
Pump Details
Bowl : Glass Filled Noryl
Impeller : Glass Filled Noryl quality abrasion resistance
Shaft : Stainless Steel / Chrome Steel
Wearing Rings : High quality abrasion resistance SS
Seal : Avon makes carbon ceramic seal
NRV- Heavy duty casting material using to reduce thrust generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
Caution - Before operating or Installing this purnp read this manual and follow all Safety Rules and Operating InstructionFeatures :
motor are Designed using multi layer of PVC insulated wire to get better reliability and easy repairing.
motor to be filled with Clean, Clear drinking water to get better Cooling
Heavy Duty carbon thrust bearing
Starts easily with low voltage
Submersible Pump set perform wide voltage range.
Impeller and bowl are made glass filled noryal that gives strong resistance against sand.
Higher motor efficiency and lighter body for better performance
Products are available with NRV which reduce the thrust load to back pressure
Motors are filled with high quality grade oil which gives lubrication to bearing too.
This improves thermal conductivity which reduces chance of bearing
Dynalically balanced rotating parts to ensure minimum noise and Vibration free operation
All the hardware ( including stud nuts) is made of S 304 protecting them from corrosion in hard or sandy water and makes them easier to repair and reliable
All CI parts of submersible pump set are Power coated corrosion, durability and alignment
Motor Details
Motor body-Non magnetic Stainless steel
Thrust Bearing Self align carbon v/s stainless steel thrust bearing which withstands high axial thrust Load in water lubncation
Bearing: SKF beanng no need external lubricants Cable Sealing, Water protecting device to assure
Cable Sealing : Water protecting device to assure outside Material does not enter into motor
Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
Stator : Insulating warmish using vacuum impregnation method
Rotor : Aluminum pressure die cast
Pump Details
Bowl : Glass Filled Noryl
Impeller : Glass Filled Noryl quality abrasion resistance
Shaft : Stainless Steel / Chrome Steel
Wearing Rings : High quality abrasion resistance SS
Seal : Avon makes carbon ceramic seal
NRV- Heavy duty casting material using to reduce thrust generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
Caution - Before operating or Installing this purnp read this manual and follow all Safety Rules and Operating InstructionFeatures :
motor are Designed using multi layer of PVC insulated wire to get better reliability and easy repairing.
motor to be filled with Clean, Clear drinking water to get better Cooling
Heavy Duty carbon thrust bearing
Starts easily with low voltage
Submersible Pump set perform wide voltage range.
Impeller and bowl are made glass filled noryal that gives strong resistance against sand.
Higher motor efficiency and lighter body for better performance
Products are available with NRV which reduce the thrust load to back pressure
Motors are filled with high quality grade oil which gives lubrication to bearing too.
This improves thermal conductivity which reduces chance of bearing
Dynalically balanced rotating parts to ensure minimum noise and Vibration free operation
All the hardware ( including stud nuts) is made of S 304 protecting them from corrosion in hard or sandy water and makes them easier to repair and reliable
All CI parts of submersible pump set are Power coated corrosion, durability and alignment
Features :
Self priming up to 8.5 meters.
100% Copper winding.
With stand Wide voltage fluctuations froml 80volts to 240volts.
Low Power Consumption.
Thermal Overload Protector (TOP) prevents motors burning.
The Pump fitted with high quality and long life Avon mechanical seal.
Threaded impeller resulting consistent performance.
High quality aluminum extruded motor body for better heat dissipation
class ‘B’ insulation.
Double shielded ball bearing- no need of external Lubricant.
Capacitor inside terminal box.
Better aesthetics with compact design.
Easy maintenance with interchangeable spare parts.
Material of Construction
Impeller - Cast Iron
Suction - Casing Cast Iron
Mounting - Casing Cast Iron
Diffuser - Cast Iron
Motor Body - Aluminum Extrusion
Shaft - EN-8/SS
Application
Water supply for domestic use in Bungalows, Apartments, Hotel Hospitals, Farm-houses etc
Useful in home pressure booster systems, lawn.
R O / Water treatment, car washing, small farms etc.
Features :
Self priming up to 8.5 meters.
100% Copper winding.
With stand Wide voltage fluctuations froml 80volts to 240volts.
Low Power Consumption.
Thermal Overload Protector (TOP) prevents motors burning.
The Pump fitted with high quality and long life Avon mechanical seal.
Threaded impeller resulting consistent performance.
High quality aluminum extruded motor body for better heat dissipation
class ‘B’ insulation.
Double shielded ball bearing- no need of external Lubricant.
Capacitor inside terminal box.
Better aesthetics with compact design.
Easy maintenance with interchangeable spare parts.
Material of Construction
Impeller - Cast Iron
Suction - Casing Cast Iron
Mounting - Casing Cast Iron
Diffuser - Cast Iron
Motor Body - Aluminum Extrusion
Shaft - EN-8/SS
Application
Water supply for domestic use in Bungalows, Apartments, Hotel Hospitals, Farm-houses etc
Useful in home pressure booster systems, lawn.
R O / Water treatment, car washing, small farms etc.
Voltage Range180-240 volts-Single phase , 300-440 Volts - Three Phase
Features :
100% Copper winding
With stand wide voltage fluctuations from18Ovolts to 240volts.
Low Power Consumption.
Self priming up to 7.5 meters.
Thermal Overload Protector[TOP) prevent motors burning.
The Pump fitted with high quality and long life mechanical seal.
Locked impeller resulting consistent performance.
High quality aluminum extruded motor body protection and class ‘B’ insulation.
Double shielded ball bearing- no need of external Lubrication.
Capacitor inside terminal box.
\Single phase &Three phase availability.
Uniquely designed various models are available in each rating to satisfy individual's need
Stampings are used in high electric grade for better efficiency.
Better aesthetics with compact design.
Easy maintenance with interchangeable spare parts.
Material of construction
Impeller - Forger Brass
Delivery casing - Cast Iron
Motor Body - Aluminum Extrusion
Mounting Casing - Cast Iron
Shaft - EN-8/SS
Features :
100% Copper winding
With stand wide voltage fluctuations from18Ovolts to 240volts.
Low Power Consumption.
Self priming up to 7.5 meters.
Thermal Overload Protector[TOP) prevent motors burning.
The Pump fitted with high quality and long life mechanical seal.
Locked impeller resulting consistent performance.
High quality aluminum extruded motor body protection and class ‘B’ insulation.
Double shielded ball bearing- no need of external Lubrication.
Capacitor inside terminal box.
\Single phase &Three phase availability.
Uniquely designed various models are available in each rating to satisfy individual's need
Stampings are used in high electric grade for better efficiency.
Better aesthetics with compact design.
Easy maintenance with interchangeable spare parts.
Material of construction
Impeller - Forger Brass
Delivery casing - Cast Iron
Motor Body - Aluminum Extrusion
Mounting Casing - Cast Iron
Shaft - EN-8/SS
StartingEngine is designed for starting by Hand cranking with the Help of Starting Handle.
Variable SpeeTo avoid over loading, provision for head adjustment by variable speed drive.
Standard AccessoriesAir Cleaner, Exhaust Silencer, Starting Handle, Set of Spanners and screw driver.
Lub OilSAE - 30-40 or Equivalent Grade.
Air CleanerOil Bath Type, Large Capacity for Efficient Filtration.
Exhaust - SystemA Silencer of Standard Type is fitted for Adequate Silencing.
Other Details:
Type: Vertical, totally Enclosed, Water Cooled, Single Cylinder, Four Stroke Cycle, Compression Ignition, Cold Starting Diesel Engine.
Engine Combustion: Direct Fuel Injection in Open Type Combustion Chamber Provided in an Aluminum Piston Crown; result In Low Fuel Consumption and Easy Starting.
Lubrications: Force Feed Lubrications by Plunger Type Pump Incorporating Full Flow Filter To Large End Bearing. Main Bearing, being Taper Roller Type, Need No Separate Supply. Other Moving Parts are Splash Lubricated.
Cylinder Head: High Grade Cast Iron with Smooth Air & Exhaust Parts Clear Water Jackets For Perfect Cooling.
Rotation: Standard Rotation is Clockwise when looking at the Flywheel End.
Cooling: Engine Cooling can be arranged by Run through Water System or Cooling Tank.
Drive: Standard Power take off if from Flywheel Side at Full Speed.
Crankshaft: Designed with integrated Balance Weight and is fitted with Tape Roller Bearing for Long Life.
Fuel System: High Speed Diesel Oil is supplied to the Fuel Pump by Gravity Feed through Wire mesh Filter in Tank and Efficient Paper Type Element Filter before Pump.
Other Details:
Type: Vertical, totally Enclosed, Water Cooled, Single Cylinder, Four Stroke Cycle, Compression Ignition, Cold Starting Diesel Engine.
Engine Combustion: Direct Fuel Injection in Open Type Combustion Chamber Provided in an Aluminum Piston Crown; result In Low Fuel Consumption and Easy Starting.
Lubrications: Force Feed Lubrications by Plunger Type Pump Incorporating Full Flow Filter To Large End Bearing. Main Bearing, being Taper Roller Type, Need No Separate Supply. Other Moving Parts are Splash Lubricated.
Cylinder Head: High Grade Cast Iron with Smooth Air & Exhaust Parts Clear Water Jackets For Perfect Cooling.
Rotation: Standard Rotation is Clockwise when looking at the Flywheel End.
Cooling: Engine Cooling can be arranged by Run through Water System or Cooling Tank.
Drive: Standard Power take off if from Flywheel Side at Full Speed.
Crankshaft: Designed with integrated Balance Weight and is fitted with Tape Roller Bearing for Long Life.
Fuel System: High Speed Diesel Oil is supplied to the Fuel Pump by Gravity Feed through Wire mesh Filter in Tank and Efficient Paper Type Element Filter before Pump.
Material of construction
Motor body-Non magnetic Stainless steel
Bearing: SKF beanng no need external lubricants Cable Sealing, Water protecting device to assure
Cable Sealing : Water protecting device to assure outside Material does not enter into motor
Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
Stator : Insulating warmish using vacuum impregnation method
Rotor : Aluminum pressure die cast
Pump Details
Bowl : Glass Filled Noryl
Impeller : Glass Filled Noryl quality abrasion resistance
Shaft : Stainless Steel
Seal : Avon makes carbon ceramic seal
NRV- FG-200 to reduce generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
CAUTION Before operating or Installing this purnp read this manual and follow all Safety Rules and Operating Instruction
Features
Starts easily with low voltage.
Submersible pump set perform wide voltage range.
Impeller and bowl are made from glass filled noryl that gives strong resistance against sand.
Higher motor efficiency and lighter body for better performance.
Products are available with NRV which reduce the thrust load of back pressure.
Dynamically balanced rotating parts to ensure minimum noise and vibration free operation.
All CI parts of submersible pump sets are power coated corrosion ,durability and alignment.
Al the hardware (including stud nuts) is made of S 304, protecting them from corrosson in hard or sandy water, and makes them easier to repay and reliable
Motors are filled with high quality grade oil which gives lubrication to bearing too. This improves thermal conductivity which reduces chance of bearing
Material of construction
Motor body-Non magnetic Stainless steel
Bearing: SKF beanng no need external lubricants Cable Sealing, Water protecting device to assure
Cable Sealing : Water protecting device to assure outside Material does not enter into motor
Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
Stator : Insulating warmish using vacuum impregnation method
Rotor : Aluminum pressure die cast
Pump Details
Bowl : Glass Filled Noryl
Impeller : Glass Filled Noryl quality abrasion resistance
Shaft : Stainless Steel
Seal : Avon makes carbon ceramic seal
NRV- FG-200 to reduce generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
CAUTION Before operating or Installing this purnp read this manual and follow all Safety Rules and Operating Instruction
Features
Starts easily with low voltage.
Submersible pump set perform wide voltage range.
Impeller and bowl are made from glass filled noryl that gives strong resistance against sand.
Higher motor efficiency and lighter body for better performance.
Products are available with NRV which reduce the thrust load of back pressure.
Dynamically balanced rotating parts to ensure minimum noise and vibration free operation.
All CI parts of submersible pump sets are power coated corrosion ,durability and alignment.
Al the hardware (including stud nuts) is made of S 304, protecting them from corrosson in hard or sandy water, and makes them easier to repay and reliable
Motors are filled with high quality grade oil which gives lubrication to bearing too. This improves thermal conductivity which reduces chance of bearing
We are capable of delivering the product range that is accessible from our massive inventory located at Agra(India). Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of gas engines.
We are capable of delivering the product range that is accessible from our massive inventory located at Agra(India). Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of gas engines.
Secondary Business TypeExporters / Wholesale Suppliers
Year of Establishment1972
Ownership TypePartnership
GSTIN Number09AAKFB3099G1Z6
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Established in year 1972, Bharat Industries is Manufacturers of [Generators, Turbines & Power Plants] - diesel power generators diesel engines, Double Cylinder Air Cooled Engine, Double Cylinder Water Cooled Engine, Single Cylinder Air Cooled Engine, Industrial Electric Generator, [Pumps, Pumping Machines & Parts] - Centrifugal Water Pump, Water Cooled Diesel Pump Set, portable pump set, Pump Housing, Oil Filled Submersible Pump, [Engine & Engine Parts] - gas engines, Single Cylinder Water Cooled Engine, Low Speed Water Cooled Engine, Connecting Rod, Rocker Lever, [Bearings and Bearing Components] - ball bearing, cr bearing, tr bearing from Agra, Uttar Pradesh.
Reviews & Ratings
Write a Review
Post Free Ad
