Auto Electrical Products Dealers in Ashram Road, Ahmedabad (156 products available)

We are amongst the well reputed Manufacturers, Importers, Exporters and Suppliers of Automotive Spare Parts. Our Automotive Spare Parts are made from high grade components and technologically advanced machinery. We conduct stringent quality tests in order to check the quality of our Automotive Spare Parts. Attributes Corrosion resistantEasy to installDurable and reliableHigh performance Available In Different SizesDimensions

Packaging Type : Carton

Voltage : 230 V AC

Type : Auto Drain Valves

Brand Name : JORC

Material : Brass

Condition : New

MAXIMUM COMPRESSOR CAPACITY : Any size

VALVE ORIFICE : 12 mm

Remove heavily contaminated condensate Suits compressed air pressure upto 40 bars Powerful, motorized rotation makes it impossible to block

Pneumatically Actuator operated Ball valves with FRL Unit(Filter, Regulator, Lubricator) with necessary Solenoid valves for Slurry Inlet, Cake Airing, Cake Washing, close filtrate Outlet, Air Purging (core blowing inlet / outlet] all operated in a programmed sequence as required during the operation logically controlled by PLC.  

Agriculture Diesel Engines, Centrifugal Water pumps are widely used as solution to hi tech water distribution for agriculture and Power generation for house use, Industrial use are new era in this power shortage edge. We do have solutions for this by bring new products for end users.

Piston Rods, Extended Piston Rods, Connecting Rods and Crankshafts are also available for a range of models from Chicago Pneumatic (CPT, Ingersoll Rand (IR), KG Khosla (KGK), Kirloskar Pneumatic (KPC) and ELGI Connecting Rods available in ex-stock for all major models Crankshafts available in ex-stock for all major models Available for a large range of models from Chicago Pneumatic (CPT), Ingersoll Rand (IR), KG Khosla (KGK), Kirloskar Pneumatic (KPC) and ELGI and other reciprocating compressors

Weight : Approx. 4.3kg

Brand Name : Shin Nippon

Model : DL-800

Usage : Hospital

Printer : No Printer

External Communication Port : RS 232C

Power Consumption : 40VA

Humidty Range : 30% to 90%

Minimum Order Quantity : 1 Piece

Voltage : 1kV

Conductor Material : Copper

Insulation Material : Rubber

Jacket : PVC

Operating Temperature : 0°C to 90°C

Rated Voltage : 600/1000V

Ours is a renowned name in the field of supplying comprehensive array of Marine Cable. We have installed a large storage facility wherein we keep a large stock of the offerings. This facility helps us in keeping the entire lot away from the damaging factors like moisture, sunlight, dust, rain, etc.

Thickness : 1.5-2mm

Certification : ISI Certified

Length : 10-20mtr

Application : Industrial

Voltage : 220V

Conductor Material : Aluminium

Insulation Material : Rubber

Feature : Crack Free, Durable, High Ductility

We are flexible in offering the product basket in the committed time span as we have advanced logistics facilities available. We have hired experienced personnel to handle and supervise the task of packaging in a systematic order. Thus, there are minimal chances of damage from our end as our experts check the entire lot before dispatch.   Technical Parameter : Picture elements - PAL/NTSC Effective Pixek - 628*586 pixels Resolution - 420 TV Line Les angle - 170 Wide angle 100% Waterproof - IP67/68

Length : 2,5,10,15

Power/Voltage : 230 V 4A

Application : Industrial

Features : For use on steel or concrete weighbridges, Simple installation, Above ground or pit mounted

After being a hard competitor to our contemporaries in Rajkot(India), our organization now has come forward to contest the providers in other marketplaces. The products are strictly packed and dispatched safely to the clients stated address and that too in the committed time span.

Application : Textile Industry

Size : As per requirements

Color : Silver

Thickness : 7mm

Features : Easy to use, Rugged construction , High precision, Corrosion resistance , Longer service life ,Reliability

Finishing : Polished

Shape : Round

Material : SS, MS

Product Type : Blades

Usage : in textile industries

Material Capabilities : Thread, Yarn

Finishing : Polished

Type : Steering Lock

Material : Aluminium, Magnet, Metal, Plastic, Stainless Steel

Application : Auto Industries

Color : Black, Golden, Grey, Silver, White

Finishing : Non Polished, Polished

Feature : Accuracy, Less Power Consumption, Longer Functional Life, Simple Installation, Stable Performance

Warranty : 1 Yr

Access Method : Automatic, Manual

Brand Name : Iscon

Features : Durable, Sturdy construction, Perfect finish

Material Used : Plastic components, Iron components

Application : 2 Wheeler

Features : Sturdiness,Easy to install,Resistant to corrosion

D. H. Panchal & Company began with a view to manufacture High Precession CAMs for machines that blend engineering with technological expertise, and with the purpose of customising cost-effective solutions for the specific requirements of varied industries and wide applications, such as Circular Looms, HDPE / Nylon Fishnet...   1. LOHIA TYPE 2. GIRISH TYPE 3. JAYSHREE TYPE 4. STERLINGER TYPE ETC…. 5. CONVERSION KIT FROM HDN-4 TO LSL-6

We are manufacturing connecting rod assembly for Car, Trucks, bus, tractors and earthmoving equipment. Carry the engine motive energy directly to crank, attaining high level performance. Connecting rods must be light and yet strong enough to transmit the thrust of the pistons to the crankshaft. Connecting rods are drop forged from a steel alloy capable of withstanding heavy loads without bending or twisting. Holes at the upper and lower ends are machined to permit accurate fitting of bearings. These holes must be parallel. So many type of connecting Rod Assembly. We produce high quality automotive engine parts such as engine valve and connecting rod for Indian cars spare parts. We manufacture connecting rod for UNO Diesel, Siena Diesel, Ford Escort Diesel, Lancer Diesel, Toyota Qualis, Tata Indica, PJO-309/D / Zen/D, Skoda 1.9 Diesel, Ford Icon Diesel, Tata Indigo/D, M & M Scorpio, Accent Crdi, Ford Fiesta Diesel, Toyota Innova, GMTavera (4JB1), Maruti Swift Diesel.

These cables are generally used for electrical and electronic connections for Battery chargers. Standard Adapted to BS 6862 Specifications Voltage Rating : Max. 200V Test Voltage : 10kV Temperature Range : -40°C to +90°C

Model : : ADT

Size : : ½"

Body : : S.S., 304

Press : : 10Kg

Coil : : All std. Volt Available

Material : Brass, Metal ,Plastic , Pvc ,Rubber, Stainless Steel

Weight : 1-5kg ,10-15kg, 15-20kg, 5-10kg

Color : Silver, Grey, Black

Condition : New,Old

Certification : ISO 9001:2008 Certified

Type : Picanol Cams

Finishing : Non Polished, Polished

Usage : Automobile

Device Weight: : About 35kg

Fuel tank capacity: : 4700ml

Dimensions : 385mm×410mm×500mm

Power supply : AC220V

Input power: : 250W

  LAUNCH CNC 602A Injector Cleaner   Injector cleaner designed for Indian market, ideal for medium size garage. Fuel Injector has become very critical part of modern cars since it also control efficiency and average of the modern cars. It is very necessary to remove carbon deposited on injector since fuel imported in Indian market are of lower quality.  To overcome this problem LAUNCH has designed special injector cleaner CNC-602A keeping in mind fuel quality in India. CNC-602A is an advance injector cleaner, which can clean and even test petrol car engine injectors by ultrasonic cleaning. Most advanced and path breaking innovation from LAUNCH for automotive expert.  LAUNCH CNC 602A injector cleaner is designed keeping in mind car running on Indian road LAUNCH CNC 602A can support Maruti, Hyundai, Tata, Toyota, Nissan, Mitsubishi,Honda, VW, Skoda, Renault, BENZ, BMW, Jaguar, LandRover, Porsche, Volvo, AUDI, Fiat, OPEL, Fiat and many more brand running on Indian road. Feature of LAUNCH CNC 602A: Ultrasonic cleaning: A most advance method to clean injector in most efficient way. This process removes carbon deposit from injector in most efficient way. Uniformity/Sprayability test:This test is used to test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight. Leakage test: this test is used to test the sealing and dribbling conditions of injectors under system pressure with help of in built digital fuel pressure control. Injecting flow test: It is a test to check the injected amount of the injector in 15 seconds of constant injection, from this result technician can know about clogging or wear of Injector. Auto test: To test injectors by simulating different working conditions. N-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. CNC 602A is also supported with fuel drain system by which just pressing one button drain all cleaning fluid. Reverse flush test: LAUNCH CNC 602A can also do reverse flush test where technician can clean injector by flushing liquid from outlet of injector to the inlet of the injector.  LAUNCH CNC 602A Specification: Device Weight: About 35kg Fuel tank capacity: 4700ml Dimensions: 385mm×410mm×500mm Power supply: AC220V Input power: 250W Ultrasonic device power: 100W Simulated RPM range: 20 to 9880rpm Time range: 1 to 9988 Second Generated Pulse width: 0.5 to 25ms

Material : Copper, Sheet Metal, Steel

Shape : Rectengular, Round, Square

Thickness : 0-3mm, 12-15mm, 3-5mm, 5-7mm, 7-9mm, 9-12mm

Length : 3-4ft, 4-5ft, 5-6ft, 6-7ft, 7-8ft

Color : Brown, Creamy, Grey, Silver

Feature : Corrosion Proof, Durable, Heat Resistant, Water Proof

Condition : New, Used

Finishing : Galvanized,Polished,Powder Coated

Packaging Type : Corrugated Boxes,Plastic Bags

auto tube brass valves, Pet Coke, Industrial Chemicals, Dyes, Bicycle Tyres

Material : Rubber

Usage/Application : Industrial

Crack Resistance : Yes

Injector Emulators are capable of emulating the normal operation of the petrol injectors while the vehicle runs on gas. The Injector Emulators prevent the Check Engine Light from activating due to injection. Injector Emulators are designed for 3 & 4 cylinder vehicles. The Injector Emulators are available with different types of TYCO, DELPHI, HONDA, BOSCH, TOYOTA type Wiring Harness suitable with original couplers on vehicle.

Features : Longer life, lesser wear, Eliminates hidden flaws unnecessary breakdown, Guaranteed safe, dependable, long life

Packaging Type : Box

Materials : Metallic,Aluminum Alloy

Surface Finish : Polished

Usage/Application : Industrial

Compressor Type : Screw Compressor