deesha Impex Ambawadi, Ahmedabad, Gujarat

We are offering zero degree chamber (deep freezing chamber) this instrument is in according to astm bs, din, iso, is (indian standard) or according to customer’s required specification inside galvanize body with epoxy coating outside ms body with powder coating eco-friendly cooling gas filled for compressor most reliable compressor fitted in machine for better performance & long lasting circulating fan is mounting inside the machine for uniform temperature digital pid based temperature controller with dual display range: -20 to +20°c.

This Instrument is in according to ASTM D 1525 for VSP 648 for HDT BS, DIN, ISO, ISI (Indian Standard) or according to customer’s required specification Temperature gradient corresponding 50°c/hr, 120°c/hr or free programmable Start temperature free programmable Displacement measuring by vibration free Digital dial gauges accuracy of ±0.01mm At the same time user conduct test of VSP or HDT Sample thickness 2-12 mm With high power cooling system. Re-cooling time from 200°c to ambient temperature in approx 30-45minutes With help of cooling facility user can start new test immediately Bath construction made by inside SS and outside MS with insulation Stirring facility is used for uniform temperature

This Instrument is in according to ASTM D 638 and can supply accordance with BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification. Mechanical Structure on Single Screw Base supported tie-bar with linear motion bearing to carry load. Machine capacity according to customer requirement. Motor & Gear Box : Motor Coupled with Gear box.(Make : Bonfiglioli). Oil Free Gear box is used to avoid maintenance problem. Speed range from 10 to 500mm/min, speed selectable directly from the computer. Microprocessor based digital display for load and extension. Load accuracy dependable of the load cell. Accuracy 1% of the full scale value of load cell. Cross head travel : up to 800mm. Extension display 0.01mm with 0.5% accuracy of travel. Live interfacing on to computer during the test. Unit conversion facility in load and extension. (i.e N-kg-lbf and in extension mm-cm-inch). Stress Vs. Strain graph also available after completion of the test.

This Instrument is in according to ASTM D 638 and can supply accordance with BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification.Mechanical Structure on Single Screw Base supported tie-bar with linear motion bearing to carry load.Load accuracy dependable of the load cell. Accuracy 1% of the full scale value of load cell.

This Instrument is in according to ASTM BS, DIN, ISO, IS (Indian Standard) or according to customer’s required specification Machine is supply with PID based temperature controller with auto tuning facility to maintain accurate temperature Digital display range: 0-1000°c, L.C 1°cWith desiccators, Bunsen burner, tri-pad, silica crucible, Sulphuric acid (500ml) Firebricks insulated muffle furnace with side opening door

This Instrument is in according to ASTM BS, DIN,ISO, IS(Indian Standard) or according to customer’s required specification Oven chamber size: 36inch x 36inch x 36 inches Temperature ranges up to 200°c. Least count 0.1 Temperature accuracy ±0.5°c Temperature controlling via PID controller and also in built auto-tune facility Oven design construction to minimize heat losses Body construction out side MS and inside SS

User conduct shear, puncture, tear, bonding etc. test  PC communication via RS-485 converter for fast data collecting and every moment data collection to analyze product at each and every point.  User friendly software Easy installation of window based software in computer Over load and over elongation safety features is provided through software and PLC Auto graph scales on X axis as well as Y axis Software presents test results in tabular and graphical formats Configure the test using a standard test setup template which is pre-formatted for each type of test Report generation is through PLC via RS-232 to RS-485 converter Pre define profile feed to switch over from one test method to another test method

PC communication via RS-485 converter for fast data collecting and every moment data collection to analyze product at each and every point. Configure the test using a standard test setup template which is pre-formatted for each type of test, Pre define profile feed to switch over from one test method to another test method.

This Instrument is in according to ASTM D 1003, BS, DIN, ISO, IS (Indian Standard)or according to customer’s required specification Direct percentage reading facility digital display Operation of instrument cyclic to get accurate results Digital display with opacity and transparency indication Display LCD based Working principal on infrared sensing device system with helpof wave length facility SMPS 12V is fitted as a power supply to get accurate results

This Instrument is in according to ASTM D 1238, BS, DIN ,ISO,IS (Indian Standard) or according to customer’s required specification Temperature range up to 400°c with accuracy ±1°c. Resolution 0.1°c PID based temperature controller with auto-tune facility Timer: Digital timer Range up to 999.9 min/ 999.9 sec., Having preset facility and buzzer output Applied weight manual

This Instrument is in according to ASTM BS, DIN, ISO, ISI (Indian Standard) or according to customer’s required specification. Maximum pressure range 0-99.99bars. Fully Microprocessor based pressure controller to maintain the pressure with in 0.5% accuracy of full scale Fully hydraulic system with central pressurized water supply Reliable high-pressure water pump with operating pressure up to 100/200 bars User-friendly data logging software provided with machine to record data and able to get graph plotting as well as database on each stations separately Data record facility of all stations pressure as well as temp of one channel temperature controller Presentation of report in table format graphical forms Test can be conducted if power failure Air less motorized pumping stations is provided to build the pressure very fast All stations are provided with the QRC coupling to save preparation time Each station is equipped with the high reduce solenoid with the manual and auto operating modes Trip point value is selectable provided to indicate the failure and auto stop at particular station in case of the failure of the pipe or any leakage from the end plugs In built calibration facility of pressure transducers is provided with the pressure controller Auto protection of pressure transducers is also in built feature and a part of machine  

This Instrument is in according to ASTM BS, DIN, ISO, ISI (Indian Standard) or according to customer’s required specification. Maximum pressure range 0-99.99bars. Fully Microprocessor based pressure controller to maintain the pressure with in 0.5% accuracy of full scale Fully hydraulic system with central pressurized water supply Reliable high-pressure water pump with operating pressure up to 100200 bars User-friendly data logging software provided with machine to record data and able to get graph plotting as well as database on each stations separately

Maintenance and leakage free pressure gauge valve fitted inside machine. All stations with auto-locking quick release outlets, Digital programmable time totalize for time counting in short term and long term stations with buzzer indication for completion of the test and busting during the testing.

This Instrument is in according to ASTM BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification Inner chamber and trays made of Stainless steel Outer door made of Mild steel with magnetic gasket & lock key arrangement Inner door is glass door Trays are adjustable at any distance in a chamber Digital humidity controller fitted for cooling and heating cycle System is supplied with refrigeration and forced air circulating system also Wheel mounted on to the base for easy movement Temperature controller and humidity controller are digital Humidity wet and dry system 40 to 95% RH Temperature range: ambient to 80°c with L. C 0.1°c Boiler level protection system is in corporate

This Instrument is in according to ASTM BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification With digital temperature controller PID action based Range room temperature to 100 ± 1°c Inside SS out side MS body with insulated Water circulating pump to maintain uniform temp

This Instrument is in according to ASTM BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification  Oven chamber size: 12inch x 12inch x 12 inches or according to customer requirement Temperature ranges up to 200°c Least count 0.1 Temperature accuracy ±0.5°c Temperature controlling via PID controller Oven design construction to minimize heat losses Body construction out side MS and inside SS Fan circulating and stirring facility to maintain uniform temperature into oven

We are offering heat sealer machine is based on pneumatic operating system. temperature zone : two both the temperature zone has separate temperature controller and heaters. temperature is controlled via pid based auto tune facility. temperature range: ambient to 220°c (extra on request) temperature least count 0.1°c with accuracy better than ±1°c. pencil type air heaters are fitted on the both temperature zone. heating jaws: one jaw is fixed and another jaw is operated with help of pneumatic system. maximum daylight opening between two jaws is 100mm. maximum sealing length 150mm and sealing width is 20mm maximum. jaw is operated with help of timer fitted in the equipment, timer range 99.9minutesseconds. machine is table top compact model suitable for laboratory environment.

Machine is based on pneumatic operating system. Temperature zone : Two Both the temperature zone has separate temperature controller and heaters. Temperature is controlled via PID based Auto tune facility. Temperature range: ambient to 220°c (Extra on request)Temperature least count 0.1°c with accuracy better than ±1°c. Pencil type air heaters are fitted on the both temperature zone. Heating jaws: One jaw is fixed and another jaw is operated with help of pneumatic system. Maximum daylight opening between two jaws is 100mm. Maximum sealing length 150mm and sealing width is 20mm maximum. Jaw is operated with help of timer fitted in the equipment, timer range 99.9minutes/seconds. Machine is table top compact model suitable for laboratory environment.

This Instrument is in according to ASTM D 1709 BS, DIN, ISO, IS: 2508 (Indian Standard) or according to customer’s required specification A two piece annular specimen clamp having an inside diameter of 127mm The movable part of clamp is maintaining positive contact with the lower part of the contact to hold the film sample firmly Pneumatically operated clamps have been used to hold film successfully in to the clamps Electromagnet withstand 2 Kg. weight. Electromagnet unit is to be equipped with a centering device to ensure reproducible drop. Electric power is used to energize and de-energize the electromagnet Positioning device is provided to positioning the dart at a different drop height Position device is built in two parts. One is for 22cms and 66cms and another is suitable up to 152.4cm Darts and weights : As per standard Test Methods A and B darts with hemispherical heads

This Instrument is in according to ASTM BS, DIN,ISO, ISI (Indian Standard) or according to customer’s required specification.  Maximum Energy range up to 25Joules. LCD display to check result. Semi automatic model with DEESHA's customized PLC. Direct calculated results display and hammer falling facility directfrom the controller. Hammer length and sample details entry manual from the display. Wise type holding fixture for tensile impact test. Sample clamping mechanism as per ASTM D 1822 or according to requirement.

This Instrument is in according to ASTM BS, DIN, ISO,IS (Indian Standard) or according to customer’s requiredspecification.  Maximum load value 120gms Equipment designed on based of specific gravity method Direct reading of density value Mechanical structure arrangement for measure weight in liquid and weight in air Density measurement on specific gravity method Simple and easy structure to measure reading accurately Vibration free and covered body structure to avoid useless effect on to the load cell

This Instrument is in according to ASTM D 1505, BS, DIN, ISO, IS (Indian Standard) or according to customer’s required specification Density gradient column with single column method Graduated column with working length of 70cms Out side acrylic jacket covered on to the column with temperature controlling facility Calibrated 5nos of glass floats with mark identity One time test conduct chemical is part of supply Complete test conduct glass wares with necessary other accessory supply with the instrument Magnetic stirrer with hot plate provision supply with the instrument

This Instrument is in according to ASTM D 1709 BS, DIN, ISO, IS: 2508 (Indian Standard) or according to customer’s required specification, The movable part of clamp is maintaining positive contact with the lower part of the contact to hold the film sample firmly, Electromagnet withstand 2 Kg. weight. Electromagnet unit is to be equipped with a centering device to ensure reproducible drop. Electric power is used to energize and de-energize the electromagnet.

Diameter : 127mm