We are ranked amongst the foremost firms, engaged in offering a qualitative range of YStrainers. In agreement with the international standards, these products are manufactured by our experts using enhanced grade material and the newest technology. Our esteemed clients can buy these products from us in different modified options. Besides, we provide these products in diverse specifications to meet the assorted needs of clients.
Features
Sturdy design Simple installation Intricately finished
We are ranked amongst the foremost firms, engaged in offering a qualitative range of YStrainers. In agreement with the international standards, these products are manufactured by our experts using enhanced grade material and the newest technology. Our esteemed clients can buy these products from us in different modified options. Besides, we provide these products in diverse specifications to meet the assorted needs of clients.
Features
Sturdy design Simple installation Intricately finished
Reducing And Blind Flanges
Description:
Lined Reducing Flanges, Flange Material in MS as per IS 2062 GRA or in Ductile iron as per ASTM A 395. Flange drilling will be for A@ as per DIN 2673 PN 10 drilling willbe for B@ as per ANSI B 16.5 150#
Sizes Available:
As per customers requirements and specifications.
Grades
PFA / FEP
Reducing And Blind Flanges
Description:
Lined Reducing Flanges, Flange Material in MS as per IS 2062 GRA or in Ductile iron as per ASTM A 395. Flange drilling will be for A@ as per DIN 2673 PN 10 drilling willbe for B@ as per ANSI B 16.5 150#
Sizes Available:
As per customers requirements and specifications.
Grades
PFA / FEP
Available in PTFE, PFA, FEP , PVDF materials. PFA Lined Balls, Body, Spindle, Butterfly Valve Disk, Diaphragm Valve Body - As per customer's drawings and specifications.
Available in PTFE, PFA, FEP , PVDF materials. PFA Lined Balls, Body, Spindle, Butterfly Valve Disk, Diaphragm Valve Body - As per customer's drawings and specifications.
Description:
Lined 2 piece designed cast body and flange with stainless steel cast ball/stem. F to F as per ASA 150 class & DIN standard. Flange drilling as per customers requirement
Sizes Available:
15 NB to 300 NB
Lining Materials
Lined with PFA/FEP/PVDF/PTFE/PP
Description:
Lined 2 piece designed cast body and flange with stainless steel cast ball/stem. F to F as per ASA 150 class & DIN standard. Flange drilling as per customers requirement
Sizes Available:
15 NB to 300 NB
Lining Materials
Lined with PFA/FEP/PVDF/PTFE/PP
Sizes Available:
From 1" Dia to 36" Dia upto 75mm maximum C/S for any make compressors
Grades
All filled Grades like CFT / GFT / BFT / MOS2 / Ceramic field
Sizes Available:
From 1" Dia to 36" Dia upto 75mm maximum C/S for any make compressors
Grades
All filled Grades like CFT / GFT / BFT / MOS2 / Ceramic field
Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy),Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark.DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe.
Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy),Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark.DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe.
Dipflon spargers are ideal for steam entrainment or other applications where diffusion of the process fluid is desired. The bottom section of the sparger is an integral part of the encapsulating PTFE liner. It is designed to provide a radial spray that can be tailored to your exact requirements. Spargers can be drilled to your specification; number and diameter of holes, distance from the end of the tube and length of drilled section can all be specified.If not otherwise specified the drilling shown in table below is provided.
Description:
Lined C.S. pipes & spargers with inside & outside linings as per customers requirement.
Sizes Available:
25 NB to 100 NB and length as per requirements
Lining Materials
PTFE
Dipflon spargers are ideal for steam entrainment or other applications where diffusion of the process fluid is desired. The bottom section of the sparger is an integral part of the encapsulating PTFE liner. It is designed to provide a radial spray that can be tailored to your exact requirements. Spargers can be drilled to your specification; number and diameter of holes, distance from the end of the tube and length of drilled section can all be specified.If not otherwise specified the drilling shown in table below is provided.
Description:
Lined C.S. pipes & spargers with inside & outside linings as per customers requirement.
Sizes Available:
25 NB to 100 NB and length as per requirements
Lining Materials
PTFE
Every Year there are unfortunate chemical plant accidents caused through the ignition of flammable chemicals. One of the key reasons is the discharge of an electrical spark generated through static charging.
Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy)
However with a volume resistivity in excess of 1016 Ω cm, they are capable of resisting conductive discharge.
Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark.
DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe.
Moreover the chemical resistance, temperature/vacuum rating and mechanical strength, remains unchanged by the electrical properties of the PTFE and PFA. The conducting agent in the lining material is stable, not subject to chemical attack and will not leach into the process medium.
Every Year there are unfortunate chemical plant accidents caused through the ignition of flammable chemicals. One of the key reasons is the discharge of an electrical spark generated through static charging.
Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy)
However with a volume resistivity in excess of 1016 Ω cm, they are capable of resisting conductive discharge.
Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark.
DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe.
Moreover the chemical resistance, temperature/vacuum rating and mechanical strength, remains unchanged by the electrical properties of the PTFE and PFA. The conducting agent in the lining material is stable, not subject to chemical attack and will not leach into the process medium.
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Born in mid eighties, a company with primary objective of implementing hi-tech engineered polymer processing, throughout last 30 years, DIPFLON has gained specialization in its target of achieving polymer processing. Our corporate philosophy has been to create innovative and technologically advanced PTFE Moulded and Lined Components, pipes, tubes and fittings. We believe in providing top quality products and service to our esteemed and eputed customers. CERTIFICATIONS Dip-Flon Engineering & Co. is an ISO 9001:2008 certified company and a member of DuPont's PPN Network. Also we are approved by various TPI like EIL, UHDE, TATA,CE Projects etc; THE PLANT Our manufacturing plan based in Chattral GIDC, Gujarat, India spreads to about 3000 sq yards and working staff of about 100 people who constantly take care of all the processes which are required to produce a quality product. THE CLIENTS Our range of products are used in various industries across the globe including Chemicals, Petrochemicals, Refineries, Food and Beverages, Textile, Pharmaceuatical, Pulp & Paper, Fertilizers, Mining industry.
Reviews & Ratings
Write a Review
Post Free Ad