Filter Concept Pvt. Ltd. Ashram Road, Ahmedabad, Gujarat

Filter Concept Pvt. Ltd. is one of the leading Spun bonded filter cartridges exporters. Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants.

Filter Concept Pvt. Ltd. is one of the leading Spun bonded filter cartridges exporters. Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants.

Filter Concept Pvt. Ltd. is one of the leading Spun bonded filter cartridges exporters. Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants. Construction Spun bonded filter cartridges are made up of 100 % poly proplyne. Operation : Unfiltered fluid passes through depth filter matrix and enables the progressive retention of finer particles, which provides high efficiency, high dirt retention & long filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

Filter Concept Pvt. Ltd. is one of the leading Sintered Multi Layered Wiremesh exporters. Sintered multilayer wire mesh bags are designed for high temp Application of Industries. It can be used for high temperature up to 480°C. It has one standard combination of 5 Layers sintered wire mesh made from stainless steel which is brought together through vacuum sinter, compression and rolling and made into a kind of porous material. » Large filtration area, from 1 Micron to 100 Micron for absolute filtration » Steady filter rating, as it has two protective layers and sinter arts, the mesh of the filter layer is not easy to change» High mechanical strength & excellent resistance to pressure due to fourth and fifth layers reinforced » Easy to wash, specially back washing » Easy to wash, specially back washing » Heat resistance , Heat resistance up to 480°C » Corrosion resistance » Tractability, suit to cut, punching, wrap   

Filter Concept Pvt. Ltd. is one of the leading Scrapper Mechanism and self cleaning filter manufacturer company. These type Filters are widely used for continuous filtration requirement without any replacement of Filter Consumables like filter cartridges, filter bags..etc and without Exposure of operators. Like auto backwash filter, Scrapper Mechanism Self Cleaning is used for preliminary filtration following the same principle of differential pressure; the only difference is that it is used for applications where back washing medium is not available. In other words, Scrapper Mechanism Self Cleaning Filter is used where in one cannot introduce any additional substance for back washing.   Scrapper mechanism type self-cleaning filter is constructed of filter housings, filter elements, drain valve, and PLC controller. Filter housings can be offered in various materials of construction such as various grades of stainless steel, carbon steel and alloy metal. Filter elements can be offered with wedge wire, sintered multi-layer wire mesh, plain wire mesh and sintered metal powder configuration. They are selected based on the requirement of filtration quality. For 100 microns and more, normally it is recommended to use wedge wire element. From 2 microns to 100 microns, it is advisable to use sintered multi-layer wire mesh and plain wire mesh, depending upon the application requirement. In addition, it has a scrapper mechanism which is operated by a geared motor. Customers can use pneumatically or electrically operated butterfly valve or ball valve as per their process requirement. Normally our systems are equipped with pneumatically operated solenoid valves for back washing and draining. Control panels can be offered with FLP (flame proof) and non-FLP, depending upon the process requirement.   We have wide expertise and knowledge in the manufacture and export of world-class self cleaning filters like Auto backwash type, Scrapper mechanism type & Disc type Specialized in application analysis.Our endeavours in this field is backed by a strong R & D support and our own vast experience in dealing with the OEM & End Customer in the various industries like Oil & Gas, Petrochemicals, Power, Steel, Chemicals, Pharmaceuticals, Fertilizers, Dyes & Intermediates, Paint & Ink, Water Treatment etc. » Domestic water supply » Process Industries. » Glycol » Cooling water » Reclaimed water » Ground water » Surface water removal » Boiler backwater » Agriculture irrigation water » Green spray » Landscape water » Swimming pools » Tooth Paste » Reverse osmosis » softening » Ion exchange » Oil field » Paint & Inks » Chemicals » Latex » Adhesive » Lubricants

Filter Concept Pvt. Ltd. is one of the leading RBCM and Resin Bonded filter cartridges manufacturers. Resin bonded filter cartridges are produced from cellulose fibers, which have been intrinsically bonded together by a melamine resin, to create a solid highly durable & porous structure. By treating the fibers in this fashion we can ensure a stronger cartridge that is less likely to collapse than a wound or pleated cartridge.

Filter Concept Pvt. Ltd. is one of the leading Pocket filter exporters. Pocket filter are made up of non woven synthetic fiber media to ensure retention of solid particles up to the stipulated micron rating. These are covered with supporting layer of spun bonded media to avoid any type of particles or fiber migration, even after high pressure build up. Media are sealed with thermal bonding or stitching as per requirement.   We have wide expertise and knowledge in the manufacture and export of world-class industrial filters. Specialized in application analysis.Our endeavours in this field is backed by a strong R & D support and our own vast experience in dealing with the OEM & End Customer in the various industries like Oil & Gas, Petrochemicals, Power, Steel, Chemicals, Pharmaceuticals, Fertilizers, Dyes & Intermediates, Paint & Ink, Water Treatment etc. » Chemicals » Pharmaceuticals » Gas turbine compressors » Food and Beverages » Fertilizer » Spare painting booths

Filter Concept Pvt. Ltd. is one of the leading Plastic bag filter housing exporters. Plastic Bag Housing is made of 100% pure German made Polypropylene resin, by integrated one-piece injection molding technologies, featuring excellent resistance to pressure, corrosion and ultraviolet light attack. It is designed to use industrial standard Size two filter bags (Ø 7” X 32”long ); Filter Housing has broad applications, and is ideal for high flow, corrosive and outdoor applications.   » Made by integrate one-piece injection molding. High overall product integrity and strength. » UV inhibitor plastic formulation, ideal for extended outdoor applications » Fiber glass reinforced structure for boosted pressure resistance » Use industrial standard Size 2 filter bag. User friendly » Filter bag seal: use patented bypass free SDS pressure seal ring, 100% bypass free guaranteed » Effective top mounting lipped high pressure gasket » Only one gasket seals the entire housing » Inlet/outlet Connection: 2.0 BSP » Inlet/outlet Configuration: Side-in, side-out, offline dual option » Seal Gasket Materials: Buna-N & Viton » Standard Package: Buna-N gasket, basket, vent valve, plastic bag holder » Options: Polypropylene flange, plastic pressure gauge

Filter Concept Pvt. Ltd. is one of the leading PES filter cartridges [Poly Ether Sulphone filter cartridges] exporters. PES Cartridges are made of poly ether Sulphone with uniform pore distribution to ensure maximum performance in bacterial retentions. It is upstream & down stream polyester support ensures resistance to pressure shocks. Polyethersulphone membrane is hydrophilic in nature, it allows easy integrity testing for all applications where daily controls are required. The membrane possesses broad chemical compatibilities & contains no surfactants. PES Cartridges are produced in controlled environments &under stringent production conditions that ensure filter quality & cleanliness. These are assembled integrally by thermowelding. This process minimizes the presence of oxidization of substance & yield a durable filter cartridges suitable for extended use. This can be sanitized by chemical agents or by inline steaming. PES and polypropylene, the unique two materials used in cartridge manufacturing are chemically inert, not shedding and biologically safe according to F.D.A., USP and EEC requirements for pharmaceutical and food contact use. The filtration area of each cartridge is as high as 0.7 m2. Therefore it offers high flow rate, low pressure drop & long service life.

Filter Concept Pvt. Ltd. is one of the leading panel Filters exporters. Panel filters are used in industries to retain particles ranging from 1 micron to 50 micron. These filters are basically air intake filters, which is working with negative pressure of systems. These filters are further classified as. » Primary » Secondary Filters   We have wide expertise and knowledge in the manufacture and export of world-class Panel filters. Specialized in application analysis.Our endeavours in this field is backed by a strong R & D support and our own vast experience in dealing with the OEM & End Customer in the various industries like Oil & Gas, Petrochemicals, Power, Steel, Chemicals, Pharmaceuticals, Fertilizers, Dyes & Intermediates, Paint & Ink, Water Treatment etc.

Filter Concept Pvt. Ltd. is one of the leading Liquid filter bags exporters. Filter bags are manufactured for optimum filtration performance. These type of filter bags are made from carefully selected media, according to the specifications of the process industry. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in removing solid particulate from liquids where large volumes of contamination are present or where highly viscous fluids are required to be filtered. They offer an effective solution to many filtration problems. Flow Rate 1, 5 , 10 , 20 , 50 , 100 , 200 Micron Operation : Filtration takes place as the liquid flows from the inside of the filter bag to the outside. Needle felt filter bags utilize the reliable mechanisms of depth filtration and have a high dirt holding capacity. Mesh filter bags utilize the well proven mechanisms of surface filtration and are effective in removing large solid particulate or agglomerates from the liquid flow. Filter bag replacement is simple. All debris and contamination removed from the liquid is held inside the bag which is lifted from housing after opening the top lid or bowl and disposed of in accordance with environmental regulations.

Hygienic filter housing offers wide range of flow capacities & contaminant holding capacities. Hygienic filter housing manufactured from highest quality SS (Stainless Steel)-316. These are suitable for a variety of liquid filtration applications designed to fit standard 222 O' Rings & 226 O' Ring cartridges.  

Filter Concept Pvt. Ltd. is one of the leading Hydraulic & Lube Oil filters exporters. Hydraulic filters are used in demanding applications of filtration of oil at any operating conditions. Irrespective of operating conditions like high pressure, low pressure, highly viscous oil, or highly contaminated oil, we have best adequate solution for these applications. We have filters which can remove moisture contents from oil.   Retrofit Equivalent To » PALL, HYDAC, INTER NORMAN, Parker, & Many more Hydraulic filters are Subcategorized as » Suction strainer » Return line filter » High pressure filter » Medium pressure filter » Low pressure filter » Offline & portable mobile filter unit » Replacement filter elements » Moisture removal filter

Filter Concept Pvt. Ltd. is one of the leading Hepa Filters exporters. Hepa filters are designed to meet requirement of very fine filtration up to 0.3 micron at high efficiency of 99.99 %. We have added a new feature in conventional hepa filters by using spun bonded polyester media which is cleanable in nature. These are available with different coatings like PTFE coating, PTFE lamination & more for better dust releasing. Due to hydrophobic & oleo phobic treatment on media, it does not allow any moisture & oil contents to pass through.

We are one of the leading FRP | GRP Filter housing manufacturer & exporters. Filter Concept Offers Corrosion resistant Fiber Reinforced Plastic (FRP) Filter housing to meet the demanding needs of industry to Filter corrosive and non-corrosive fluids for various applications including Chemicals, Oil and Gas, Petrochemical, Power Generation, Desalination, Potable Water, Municipal and many more Industries. Operation : Contaminated fluid enters the housing and is distributed evenly around the filter cartridges/Filter Bags. Filtration takes place from outside to inside or Inside to outside depending upon flow patterns. Solids are collected on the outside of filter cartridges or Inside of the Filter Bags & clear filtrate is collected at outlet.     Special Options Customized design available Positive sealing arrangement to avoid bypassing ASME Designs available Sizes (FRP/GRP filter housings suitable for Cartridge Filter) 1 No. To 250 Nos. Of Cartridges in Single Housing 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge 10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge Sizes (FRP/GRP filter housings suitable for Bag Filter) FRP/GRP Bag filter system suitable for Ø 4" x 10" Long Filter Bag Ø 4" x 17" Long Filter Bag Ø 7" x 17" Long Filter Bag Ø 7" x 32" Long Filter Bag Multiple bag filter system suitable for 2 Nos. Of Ø 7” x 32” Long Filter Bag 3 Nos. Of Ø 7” x 32” Long Filter Bag 4 Nos. Of Ø 7” x 32” Long Filter Bag 5 Nos. Of Ø 7” x 32” Long Filter Bag 6 Nos. Of Ø 7” x 32” Long Filter Bag 7 Nos. Of Ø 7” x 32” Long Filter Bag 8 Nos. Of Ø 7” x 32” Long Filter Bag 9 Nos. Of Ø 7” x 32” Long Filter Bag Flow Rate Capacity: Up to 1000 m3 /hr & more Material Of Cunstruction {M O C} Fiber Reinforced Plastic ( FRP) Glass fiber Reinforced Plastic ( GRP ) POLYPROPYLENE Cartridge filter housing suitable for filter cartridges of Double Open End (DOE) Type Code 7 (226 O' Ring) Design Code 3 (222 O' Ring) Design NPT Threaded Connection Type Gasket / O Ring Material Neoprene Nitrile Silicone Viton Buna N EPDM PTFE Spiral Wound CAF End connections available NPT / BSP Threaded Flanged Table E / Table F ANSI B 16.5 Flanged DIN Standard

Filter Concept Pvt. Ltd. is one of the leading Gas Filters exporters. We offer a range of gas filtration systems for removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. Filtered gas results low down time & reduces the production loss. These filtration systems are designed depending on their flow requirement, line size, working pressure, working temperature & level of filtration rating. Filter housings can be made of SS 316, SS 304, carbon Steel or aluminum. Filter elements are made of varieties of selective fiber media to achieve desired filtration level. We offer replacement of existing vessels and new design vessels. These are made as per the process requirement to offer high filtration area, lower pressure drop & extended service life of filter element. These filters are available in customized design & capacity to meet particular process parameters. Filter housings for these filters are available in standard design codes like ASME SEC VIII DIV I & other pressure vessel design code stamped upon special request. TThese filters are further classified in three different categories » Particle removal filter (For removal of dirt, dust, rust & other metal particles up to 1 micron) » High efficiency filter (For removal of oil & moisture contents and fine particles up to 0.01 micron) » Carbon filter (For removal of oil vapour, test & odour)   We have wide expertise and knowledge in the manufacture and export of world-class gas filters Specialized in application analysis.Our endeavours in this field is backed by a strong R & D support and our own vast experience in dealing with the OEM & End Customer in the various industries like Oil & Gas, Petrochemicals, Power, Steel, Chemicals, Pharmaceuticals, Fertilizers, Dyes & Intermediates, Paint & Ink, Water Treatment etc. » Gas Filters For Natural gas filtration » Gas Filters For CNG & LPG Gas filtration » Gas Filters ForOxygen Gas » Gas Filters For Nitrogen Gas » Gas Filters For H2S Gas

Filter Concept Pvt. Ltd. is one of the leading dust collection non woven filter bags exporters. Filter bags are manufactured for achieving optimum filtration performance. They are made from carefully selected media. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in reducing dust emission levels as per requirement of industries. These bags are placed in dust collector with supporting filter cages. Contaminated air takes path of outside to inside filtration. All solid contaminants get deposited at outer surface & clean air / gas passes through top chamber. Particles retained at the outer surface of media get collected at the bottom of dust collector with the help of shaking mechanism or reverse pulse jetting mechanism  

We are leading disc type filter manufacturer & exporters in india. Disc Type Self Cleaning Filter is used for highly viscous material filtration like Greece, Lube Oil, Edible Oil, Toothpaste & many more. Here, we don’t required any backwashing media to clean the Filter Element. It is working under principle of differential pressure parameters for uninterrupted filtration requirement.   Disc type self-cleaning filter is constructed of filter housings, filter elements, and drain valve. It also has a pneumatic cylinder and timer-based drain valve. Filter housings can be offered in various materials of construction such as various grades of stainless steel, carbon steel and alloy metal. Filter elements can be offered with wedge wire, sintered multi-layer wire mesh, plain wire mesh and sintered metal powder configuration. They are selected based on the requirement of filtration quality. For 100 microns and more, normally it is recommended to use wedge wire element. From 2 microns to 100 microns, it is advisable to use sintered multi-layer wire mesh and plain wire mesh, depending upon the application requirement. For final filtration of 0.2 microns to 5 microns, sintered metal powder is a suitable filter media. Customers can use pneumatically or electrically operated butterfly valve or ball valve as per their process requirement. Normally our systems are equipped with pneumatically operated solenoid valves for back washing and draining. Control panels can be offered with FLP (flame proof) and non-FLP, depending upon the process requirement.

Cyclone dust collectors are the equipment of choice for many applications involving the collection of various sizes of dust particles. In some cases, cyclone dust collectors have been used as a pre-filter before a cartridge or  baghouse collector, to out the larger, more abrasive dust particles that can easily damage standard media filters.

Filter Concept Pvt. Ltd. is one of the leading Compressor filter exporters. Compressor filters offer wide range of filtration solutions for all industrial applications. Filter Concept Pvt. Ltd. Offers a complete range of compressor OEM filters like air filter, oil filter & air oil separator. Our compressor OEM filters are equivalent to Atlas Copco, IR, ELGI, Kirloskar, K G Khosla etc.

Filter Concept Pvt. Ltd. is one of the leading Compressed Air Filters manufacturers. Compressed air is a very common source of energy. For effective utilization of compressed air, it has to be clean. Filter Concept offers a range of compressed air filters for removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. Filtered compressed air results into low down time & reduces the production loss. These filtration systems are designed based on their flow requirement, line size, working pressure, working temperature & level of filtration rating. Filter housings can be made of SS 316, SS 304, carbon steel or aluminum. Filter elements are made of varieties of selective fiber media to ensure desired filtration level. These filters are further classified in three different categories » Particle removal filter (for removal of dirt, dust, rust & other metal particles up to 1 micron) » High efficiency filter (for removal of oil & moisture contents and fine particles up to 0.01 micron) » Carbon filter (for removal of oil vapour, test & odour) Operation Unfiltered compressed air enters in to filtration systems with positive pressure & passes through selective filter media to remove dirt, dust, and moisture & oil contaminants.

Catalyst recovery systems are normally used to recover the precious catalyst where in system required to recover fine particles of catalyst [such as platinum, palladium, rhenium and rhodium, Raney nickel, rhodenium ] after it is used. These systems used in almost all industries like petrochemicals, pharmaceuticals, Refineries, Edible oil etc. Catalyst Recovery Systems Construction : Catalyst recovery systems are constructed of filter housings, special type of filter elements, back purging mechanism, Control panels & other instrumentation. Catalyst recovery systems can be offered in various materials like SS-304, SS-316, SS-316L, Duplex material, carbon steel and alloy metal. Filter elements can be offered with Stainless steel wire mesh, Sintered metal powder, Random fiber / Sintered metal fiber, multi layered wire mesh. Filter elements are selected based on its applications demands. Customers can use pneumatically or electrically operated butterfly valve or ball valve as per their process requirement. Control panels can be offered with FLP (flame proof) and non-FLP, depending upon the process requirement.   Material Of Construction [MOC]-Bag Filter Housing Super Duplex, Duplex Stainless steel 2205 Stainless Steel-316L Stainless Steel-316 Stainless Steel-304 CARBON STEEL (ALL GRADE) ALLOY METALS Apart from base material we can offer LEAD LINING, RUBBER LINING, TEFLON coating on Any Metal Configuration of Cartridges Code 7 (226 O' Ring) Design Code 3 (222 O' Ring) Design NPT Threaded Connection Type Gasket / O Ring Material Neoprene , Nitrile, Silicone, Viton, Buna N, EPDM, PTFE, Spiral Wound, CAF End Connections NPT / BSP Threaded Flanged Table E / Table F ANSI B 16.5 Flanged DIN Standard Tri Clover Adaptors SMS /Dairy End Connection

Cartridge filter housing offers wide range of flow capacities & contaminant holding capacities. filter housing diameters can accommodate around 1 to 500 cartridges. Positive sealing arrangement for cartridge filter assures no particle migration or fiber migration, even after high differential pressures.  

Filter Concept Pvt. Ltd. is one of the leading Bag vessel assemblies exporters. Bag vessel assembly keeps the filter system on stream by reducing bag filter change time. Bag vessel assemblies are portable and light weight. Bag vessel assemblies advantages are High efficiency filtration, Dynamic large 'O'-ring seal and Knife edge sealing. Flow Rate Capacity:Up to 15000 lits /hr Per Unit & More Operation : Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.     Material Of Construction [MOC]-Bag Filter Housing O-ring - Buna-N / EPDM / Silicone Cap - Polypropylene Sump - Polypropylene Gauge - Brass (Optional) Vent Plug - Polypropylene Drain Plug - High density Polypropylene (Opt.) Ball Valve - PVC / Buna-N Seals (Optional) Basket - Polypropylene / SS 304 Gasket - Buna-N SIZES Bag filter system suitable for » Ø 4” x 10” Long Filter Bag » Ø 4” x 17” Long Filter Bag » Ø 6” x 20” Long Filter Bag Available End connections » 1” NPT Inline » 1.5” NPT Inline » 2” NPT Inline