Flanges Dealers in Naroda, Ahmedabad

Floating & Trunion Mounted Ball Valve, Lever / Gear / Pneumatic / Motorized  / Electrical / Remote Operated Single Piece Design Regular/Reduce Bore Flanged End Ball Valve, Rating Class 150Two Piece Design Full Bore Flanged End Ball Valve, Rating Class 150/300/600Three Piece Design Full Bore Flanged End Ball Valve, Rating Class 150/300/600 Model Series: X1P15 (1 Piece Reduce Port)Model Series: X2P15/30/60 (2 Piece Full Port)Model Series: X3915/30/60 (3 Piece Full Port) Single Piece / Two Piece / Three Piece Design Ball Valve Manufacturing Size Range:  DN25/25mm/1"/One Inch, DN32/32mm/1-1/4"/One and Quarter Inch, DN40/40mm/1-1/2"/One and Half Inch, DN50/50mm/2”/Two Inch, DN65/65mm/2-1/2”/Two and Half Inch, DN80/80mm/3”/Three Inch, DN100/100mm/4”/Four Inch, DN125/125mm/5”/Five Inch, DN150/150mm/6”/Six Inch, DN200/200mm/8”/Eight Inch, DN250/250mm/10”/Ten Inch, DN300/300mm/12”/Twelve InchSize and big more large size of ball valve can manufacture and supply on order basis. A standard port ball valve does not have an oversized ball, and as a result the hole is one size smaller than the passageway. This presents a small amount of flow restriction as the fluid passes through the ball valve. A reduced port ball valve, on the other hand, has an even smaller ball and an even smaller hole, which creates significant flow restriction as the fluid passes through the valve. All PTFE / Soft seated ball valve give Zero Leakage. Nivz all types of Ball Valve Manufacturer, Exporter, Stockist, Supplier, Importer, API 607, Fire Safe Design, Floating - Trunion Mounted Ball Valves. A ball valve can also be a three-way valve if a third hole is bored partially through the ball, until it meets the main hole, in a shape T or L. A three-way ball valve can shut off one or all of the three passageways it connects.   Four Way Ball Valve also used with Double L/X Port for Air/Co2/Nitrogen/Gas Dryer application. Fire Safe Design 2 Way / 3 Way / 4 Way Ball also used in Oil & Gas Sector.    

We are involved in manufacturing, exporting and supplying the unsurpassed quality Compression Fittings. In order to make sure the unrivaled standards of offered fittings, we manufacture these by taking abet of modern machinery and quality proven raw material. Further, for quality guarantee, we source the raw material from the most esteemed vendors of the industry and quality test previous to use. We are having following range of Compression Fittings like Coupler, Elbow, Tee, End Cap, Male threade Adopter, Female Threade Adopter, Elbow Off-Take, Tee Off-Take, Reducer, Etc.Features Sturdiness Finely finished High durability Sizes : 20mm Up to 110mm   Pressure Rating : PN-10, PN-16   Advantages : Easy to Use Re-Usable Not Required a Power at a Joint time Not required Plumber Corrosion Resistance Affordable Price Push-Fit Type

Available M.O.C.PP (Polypropylene)PP-HPVDF (Polyvinylidene Fluoride)HDPE (High Density Polypropylene) PPCP Natural     * Flange DrilledANSI B 16.5 (150 Class)BS 10 Table DBS 10 Table EBS 10 Table FDIN. STD.      

We manufacture two way ball valves from 12" to 16" classes : 150# to 2500# material : cast iron, wcb, cf8, cf8m, non-ferrous, duplex, etc.

Normally referred as blanking flanges, Blind flanges are widely used in high pressure applications. Blind flanges are generally used to seal the end of the piping system to prevent flow of fluid. The use of blind flanges allows easy of access to piping system once it has been closed. Blind flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc.Standards: ASME B.16.5, ASME B.16.47 (A/B Series), B16.48-API590, API 605, AWWA C207, BS 10, DIN 2633, MSS-SP-44.Classes: 150 lbs up to 2500 lbsSizes: 1/2"up to 36" (Sizes over 36" available on request)Materials: Monel, Nickel, Inconel, Hastalloy, Titanium, Tantalum, Stainless Steel, Alloy Steel, Carbon Steel, Cupro-Nickel 90/10 & 70/30Joint faces: RF/RTJ/FF

Flange for drip irrigation offered by Kemron polymers. The offered product is fabricated from quality raw stuff as well as developed by our experts with global working standards. These are available in different sizes and customized shape as per requirement of applications. Our products are inspected by our quality experts to meet with the international standards of quality. It is available in size 65 mm and black colour. These are identified by their working capability, accuracy and durability in industries.

We have well-connected and capacious warehouse that helps us in arranging products systematically to deal with urgent deliveries and orders. Our exceptionally good warehouse system helps us in keeping the products safe till the final dispatch. As a respected name in the industry, we make use of only high-grade packaging material for the safe packing of the products. Thus, we ensure zero damage at buyer's end.

shivya forge is manufacturer & exporter of various types of ‘forged flanges’ in stainless steel, carbon steel, alloy steel and other metals in different sizes and class and as per customer drawings and specifications.   blind flanges lap joint flanges slip-on flanges socket weld flanges threaded flanges weld neck flanges .

Discharge Flange, Mechanical Seal, Stainless Steel Centrifugal Pum

We are offering Flanges,in all size.

ROTATING FLANGE, Stainless Steel High Pressure Pump Parts Casting

Flange, 3 Piece Flanged Ball Valv

Steel Flange

Side Flange Assembly, Heald Wir

We are the Manufacture and wholesale supplier of Hydraulic Angle Flange. We supply this Qualitative Product in All over the domestics & International Market at competitive Price.

PVC Fittings, Hydrocyclone Sand Filter, Gajanand Disc Filte

Mild Steel Flanges, Mild Steel Pipe Fitting

Shafts, Metal Engineering Parts, Sprockets, Precision Machinery Part

S.S Investment Casting Y Strainers Flanged, Teflon Lined Butterfly Valv

Hydraulic 2p Flange, Water Pump Head, Industrial Nozzle

Stainless Steel Coil, Stainless Steel Products, Stainless Steel Pipe