Post Free Ad Sign Up

Geomembrane Dealers in Ahmedabad

(22 products available)
  • HDPE Geomembrane Sheets

    HDPE Geomembrane Sheets

    Get Price Quote
    • MaterialHDPE
    • Thickness0.70 To 5mm.
    • FeatureLong Lasting and Waterproof
    • HDPE Geomembrane Sheet : Product is delivered in large rolls with a width of 2000mm and is a field assembled lining material that cannot be practically fabricated in the shop. All HDPE projects, regardless of size, must be installed by trained installers. HDPE offers the most cost effective liner for large projects. HDPE Geomembranes Liners are manufactured from a nonpolar thermoplastic polymer which is chemically very stable but forms a melt above 140oC, and so can be extruded at approximately 200oC. Therefore in practice, HDPE geomembranes Flat Extruded sheets cannot be glued by chemical processes and welding by thermal process is the jointing technology of choice.   Description of Welding Methods : Areas to be seamed shall be free from dust\debris and dry. In no case shall HDPE Sheet overlap be less than 75mm HDPE Geomembranes sheets are to be sufficiently overlapped up to 150mm to secure sufficient good weld. Weather conditions can be of extreme influence to the weld quality; therefore welding or Seaming is prohibited during rain without special protection. Seaming is usually prohibited at temperatures of less than + 4°c and above + 75oc. Subgrade must be maintained in good condition to guarantee permanent bearing capacity (in case welding equipment is dependent on ground pressure). Prior to commencement of welding, test welds are to be executed and tested to all weld parameters. No vehicular traffic shall travel on the HDPE geomembrane sheet other than an approved low ground pressure Vehicle or equivalent Sand bags or equivalent ballast shall be used as necessary to temporarily hold the geomembrane material in position under the foreseeable and reasonably - expected wind conditions. Geomembrane placement shall not be done if moisture prevents proper subgrade preparation, sheet placement, or sheet welding. The HDPE geomembrane shall not be allowed to "bridge over" voids or low areas in the subgrade. The HDPE geomembrane shall rest in intimate contact with the subgrade. Welding or Seaming shall primarily be performed using automatic fusion welding equipment and techniques. Extrusion welding shall be used where fusion welding is not possible such as at pipe penetrations, patches, repairs and short (less than a roll width) runs of seams. Welding or seaming of HDPE Geomembrane is a thickness dependant technique that requires a minimum material thickness to create an effective weld without distortion. Extrusion welds in sheet less than 1.0 mm thickness are not recommended. Extrusion welds in 1.0 mm thick HDPE Sheet show some distortion and can sometimes be very difficult to prepare around intricate pipe penetrations and mechanical attachments. 1.5 mm thick HDPE Geomembrane sheet can be reliably extrusion welded in most situations and is recommended in most applications. Welds in 2.0 and 2.5 mm thick HDPE Sheet are excellent and are recommended in applications that require exceptional durability. Extrusion welds are very slow and are typically used only for repairs and details. Hot wedge welders have become the technique of choice for HDPE installers over the past several years. Wedge welders are fast, produce excellent welds in HDPE sheet from 1.0 mm to 2.5 mm thickness, and can be easily tested. Hot wedge welders today produce two weld tracks separated by a small unbonded channel. By sealing off both ends of this channel, and then pumping it full of air, entire seams can be checked quickly and effectively. Fishmouths or excessive wrinkles at the weld or seam overlaps shall be minimized and when necessary cut along the ridge of the wrinkles back into the sheet so as to effect a flat overlap. The cut shall be terminated with a keyhole cut nominal 10 mm diameter hole so as to minimize crack/tear propagation. The overlay shall subsequently be welded. The key hole cut shall be patched with an oval or round patch of the same base HDPE Sheet geomembrane material extending a minimum of 150 mm beyond the cut in all directions.
    ...more
    www

    Polycan Extrusion Pvt. Ltd.

    Jamalpur, Ahmedabad
    GST 22 yrs 4.6 (30)
  • Bronco Cemshield EPDM Membrane

    Bronco Cemshield EPDM Membrane

    Get Price Quote
    • MOQ500 Meter
    • Brand NameBronco
    • Number Of FlowerRubber Based Membrane
    • FunctionRoofing Membrane(Waterproofing)
    • Packing20mtr x 1.2 mtr
    • Shelf Life1 Year
    • BRONCO® CEMSHIELD EPDM is rubber based prefabricated membrane .It is a single ply membrane made of Ethylene- Propylene-Diene ter polymer.   Area Of Application Large flat roofs of concrete and metal sheets Terrace gardens Basements and podium waterproofing Any water retaining structure e.g. lakes, water reservoirs   Advantages High tensile and tear resistance Elastomeric membrane with a good combination of high elasticity and tensile strength Retains its flexibility at low temperature (-45oC) Excellent resistance to UV and ozone Good chemical resistance Quick installation and environment friendly No maintenance required Low dead load on roof Withstands the movement in the structure due to its higher elongation property
    ...more

    BRONCO BUILDWELL PRIVATE LIMITED

    Sarkhej, Ahmedabad
    GST 8 yrs 4.3 (3)
  • HDPE Geomembrane Sheet

    HDPE Geomembrane Sheet

    Get Price Quote
    • ApplicationLining For Waste Management Pits,Canal Lining
    • FeatureHigh Chemical Resistance,Ultraviolet (UV) Stabilized
    • Geomembrane is manufactured from High density Polyethylene (HDPE) resins by the coextrusion process resulting in a high quality flexible Geomembrane which is impermeable in nature.
    ...more

    LOVSON ADROIT ENGINEERING LLP

    Bavla, Ahmedabad
    GST 2 yrs
  • Textured Geomembrane

    Textured Geomembrane

    Get Price Quote
    • Thickness0.2 To 0.8
    • Length100 To150m
    • ApplicationFor flexible and durable geomembrane applications
    • Size2.5 mtr Width and Length as per customer requirement
    • FeaturesLong Lasting and Waterproof
    • PatternPlain
    ...more

    Galaxy Plastics

    Rakhial, Ahmedabad
    GST 9 yrs 4.5 (2)
  • Waterproofing Membranes

    Waterproofing Membranes

    Get Price Quote
    We are offering waterproofing membranes. 1.liquid membrane waterproofing 2.app membrane waterproofing 3.pu membrane waterproofing 4.pvc membrane waterproofing 5.acrylic membrane waterproofing 6.tarfelt membrane waterproofing
    ...more

    Shiv Shakti Solutions

    Memnagar, Ahmedabad
    11 yrs
  • HDPE Geomembranes

    HDPE Geomembranes

    Get Price Quote
    Best grade HDPE is used to fabricate HDPE geomembranes. Considering the application area of such material, it is produced with different configurations. It is available with varied options like HDPE smooth and textured geomembrane. We are tagged as major manufacturer and supplier of best grade HDPE geomembrane. It contains better elongation property. We offer precise custom service for your special product range. The employed sophisticated technology has made our product range highly durable and reliable. Due to its better performance and excellent working life our HDPE geomambrane is used in many industrial applications.
    ...more

    Bhagwati Woven Pvt. Ltd.

    Sarangpur, Ahmedabad
    11 yrs
  • HDPE Geomembrane Sheet

    HDPE Geomembrane Sheet

    65 / Kg
    • MOQ500 Square Meter
    • MaterialHDPE
    • ColorBlack
    • ConditionNew
    • ApplicationBuilding
    • SizeCustomised
    • We are the main supplier of this product.

    Hinglaj Plastic Industries

    Vatva, Ahmedabad
    GST 9 yrs
  • HDPE Geomembrane, HDPE Sheet

    HDPE Geomembrane, HDPE Sheet

    Get Price Quote
    • MOQ1000 Kilogram
    • BlackBlue
    • WhiteAny color
    • We are manufacturers and suppliers of hdpe geomembrane, hdpe sheet, polyethylene film and pe tarpaulin. ocean hdpe sheet is high density polyethylene geomembrane manufactured by blow film process, using resins produced under the most rigorous quality controls. International standards, and guarantee of properties. The sheet is a high-molecular-weight geomembrane, derived from virgin resins and stabilized with the most modern additives available on market, giving geomembrane an excellent mechanical resistance and very good chemical compatibility. Blow film process used by us gives geomembrane a balanced molecular orientation. Its special formulation ensure a better flexibility and a perfect solder ability. product applications landfills solid & municipal waste hazard waste construction & demolition waste industrial power retention ponds cooling water ponds brine ponds pumped storage reservoirs ash repositories concrete protection concrete pipe & sewer lines trenches & sumps wastewater facilities tunnels manholes liquid containment water & wastewater petro- chemical agriculture aqua-culture canal lining dams floating covers industrial:- tank lining storm water runoff vertical barriers secondary containment mining heap leach pads solution ponds treatment lagoons others:- golf course ponds decorative ponds waterproofing specialty applications fabricated products piping systems main advantage diverse application; easy installation; resistant to innumerable chemical agents; thermal stability to the sunrays; non-toxic material; impermeable; impact-resistant; tear-resistant; excellent flexibility; easy transport logistics; excellent solder ability; zero risk in relation to micro probes.
    ...more

    Ocean Enterprise

    Ghatlodiya, Ahmedabad
    13 yrs
  • Membrane Protection Board

    Membrane Protection Board

    3,000 - 5,000 / Box
    • MOQ30 Box
    • MaterialFoam
    • ShapeRectangular
    • Thickness10-15mm
    • ApplicationIndustrial
    • FeatureFire Retardant, High Strength
    • PatternPlain
    • FinishingPolished
    • Features & Benefits Closed Cell Hence Negligible Water/ Water Vapour Absorption Light Weight Resilient Durable Chamfered Edges Easy To Use   Applications Protects Waterproofing Membranes And Liquid Applied Waterproofing Membranes In Horizontal And Vertical Applications Horizontal – Used To Protect Damp Proofing And Gas Resistant Membranes before And During Casting Over Site Concrete, Load Bearing Slabs And Screeds Vertical – To Protect Tanking Membranes On Retaining Walls / Basement Waterproofing Against Mechanical Damage During Back Filling Operations And Subsequent Settlement Movement Joints – Suitable For Forming Differential Movement Joints When New Construction Abuts An Existing Structure Temporary Protection – Recommended For Use As Temporary Protection To Finished Areas Such As Paving, Floor Tiling Other Than PVC, Stair Treads And Risers, Marble Columns Etc.
    ...more

    Sanghvis Futuristic Insupack Pvt. Ltd.

    Navrangpura, Ahmedabad
    GST 4 yrs 4.0 (1)
  • Hydro Lastik Net Chemical

    Hydro Lastik Net Chemical

    Get Price Quote
    • AppreanceGlass Fibers
    • Application temprature- 20˚C to +45˚C
    • Weight72g / meter ( ASTM D-3375 )
    • Thickness0.012”( 0.3mm ) ( ASTM D-3375)
    • WeaveLeno
    • Shelf life & Storage2 years in original unopened container, store in a cool dry place.
    • High Quality Glass Fiber Mesh with Anti-Alkaline PrimerHydro Lastik Net ( Fiberglass Mesh ) is a ready-to-use, thin, strong yet flexible alkali resistant mesh for embedment with waterproofing and crack-isolation membrane on residential and commercial floors & walls of sunk portions and top roof terrace. Fiberglass Mesh reinforces and improves the performance of Hydrobuild’s waterproofing products when applied over cracks, coves and corners and around drains on residential and commercial applications. Fiberglass Mesh can be cut to size with scissors or a razor knife, and has excellent compatibility with all cement- or epoxy-based mortars. Green Building Rating Low Ecological Impact Health Care Areas of Application Reinforcement for waterproofing of toilet & bathroom sunken portions. Reinforcement for waterproofing of kitchen wash area. Reinforcement for waterproofing of top roof terrace. Reinforcement for waterproofing of waterbodies where hydrostatic pressure exists. Reinforcement for concrete repair patches of floor, ceiling & rendering wall area. Features & Benefits Compatible with Dubond’s HydroCrete, HydroCoat, HydroCoat Osmocem, Hydro Gum waterproofing products for complete system protection. Durable. Flexible and lays flat. Making it easy to embed. Fast to install. Ready to use. Easy to cut with scissors or razor knife Method of Application After having applied a first layer of waterproofing products like HydroCrete, HydroCoat, HydroCoat Osmocem or HydroLastik in an even coat desirable as per the requirment of the waterproofing conditions using the smooth trowel, spray or brush application. Laying of the net over the first coat of the application done, positioning it in the vertical or horizontal directions and overlapping the joints by at least 10 cm. Level the surface with further material until you have obtained a desired layer as per the engineers satisfaction. It is advisable to add strips of hydrolastik net sloping at 45° on a level with windows and door openings To improve the ability of the finish to withstand impact, it is also advisable to use two layers of HydroLastik Net in places where impact is liable to occur. If waterproofing integrity is required in expansion and control joints, provide per the drawings of Architect & Engineering Consultants ,HydroLastik Strip 160 can be bonded to both sides of the joint and filled with DU Flex PS 600. A joint sealant or an expansion molding system which shall protect tilework with metal strips (edge metal) along both edges of structural building expansion joints. Precautions & Limitations Do not cover any substrate expansion joint or control joints with mortar or tiles to be provided for expansion and control joints.Health & Safety PrecautionsWhilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty s given or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and he competence of any labour involved in the application are beyond our control.
    ...more

    Dubond Products India Pvt Limited

    Thaltej, Ahmedabad
    8 yrs
  • Water Proofing Membrane

    Water Proofing Membrane

    70 / Square Feet
    • MaterialDuramembrane
    • Usage/ApplicationIndustry purpose,basement & roofs purpose

    Pararth Enterprise

    Ahmedabad
    5 yrs
  • Miprothane 1K Polyurethane Waterproofing Membrane

    Miprothane 1K Polyurethane Waterproofing Membrane

    260 - 380 / Kilogram
    • MOQ250 Kilogram
    • Brand NameMIPROTHANE 1K
    • TypePolyurethane Waterproofing Membrane
    • ApplicationRoof, Terrace & Concrete Waterproofing
    • FormLiquid / Homogeneous Paste
    • CoverageApprox. 1.5 Kg Per M² (1 Mm Thickness)
    • Walking Time10–12 Hours
    • Curing TimeUp To 2 Days
    • Elongation At Break>500%
    • Service Temperature40°C – 85°C
    • Packaging Size20 Kg
    • Application Temperature5°C – 35°C
    • We offer the MIPROTHANE 1K Polyurethane Waterproofing Membrane, ideal for roof applications. This liquid/homogeneous paste membrane provides approximately 1.5 Kg coverage per m² at 1 mm thickness. With a working time of around 30 minutes, it allows for easy application. Walk on the surface after 10-12 hours, and it cures fully in up to 2 days. Featuring >500% elongation at break, it can withstand service temperatures from 40°C to 85°C. Trust this high-quality product from a leading Manufacturer, Exporter, and Supplier for reliable waterproofing solutions.
    ...more
    www

    Chemiprotect Engineers

    Vatva, Ahmedabad
    GST 19 yrs 4.6 (13)
  • App Membrane

    App Membrane

    Get Price Quote
    App Membrane, Total Waterproofing for Old & New structure, Epoxy Pain

    Shree Shivam Conchem

    Viramgam, Ahmedabad
    17 yrs
  • waterproofing membrane.

    waterproofing membrane.

    Get Price Quote
    waterproofing membrane

    Veer Plastics Pvt Limited

    Sardar Colony, Ahmedabad
    14 yrs
  • Geomembranes & Pond Liners

    Geomembranes & Pond Liners

    Get Price Quote
    Geomembranes & Pond Liners, HDPE Tarpaulin, Railway Wagon Cover

    Jay Mataji industries

    Ahmedabad Cantonment
    16 yrs
  • Pond Lining HDPE Geomembranes

    Pond Lining HDPE Geomembranes

    Get Price Quote
    Pond Lining HDPE Geomembranes, Mulching Film, LDPE Plastic Sheet

    Kashyap Unitex Corporation

    Lambha, Ahmedabad
    9 yrs
  • Bitumen Roll

    Bitumen Roll

    Get Price Quote
    Bitumen Rol

    Gopal Hardware and Sanitary Stores

    Rakhial, Ahmedabad
    18 yrs
  • Geomembranes & Pond Liners

    Geomembranes & Pond Liners

    Get Price Quote
    Geomembranes & Pond Liners, LDPE Tarpaulin, LDPE Canal Line

    Shri Ram Plastofab Pvt. Ltd

    Khatraj, Ahmedabad
    8 yrs
  • EPDM Water Proofing Membrane

    EPDM Water Proofing Membrane

    Get Price Quote
    Trident EPDM water proofing rubber membrane has 100 % EPDM polymer content making it an ideal choice for the water-proofing of roofs, swimming pools, foundations for civil constructions, soak pits for animal feed, gobar gas plants, canals, etc. The sheet conforms to all requirements for non-reinforced black EPDM rubber sheet for use in waterproofing applications.
    ...more

    Trident Engineering

    Relief Road, Ahmedabad
    10 yrs
  • PVC Waterproofing Membrane

    PVC Waterproofing Membrane

    Get Price Quote
    PVC Waterproofing Membrane, Waterproof Fabrics, Water Repellent Fabric

    gandhi agro farm

    Sabarmati, Ahmedabad
    10 yrs
  • HDPE Membrane

    HDPE Membrane

    Get Price Quote
    HDPE Membran

    Lovson

    Prahlad Nagar, Ahmedabad
    16 yrs
  • hi-build elastomeric waterproofing membrane

    hi-build elastomeric waterproofing membrane

    Get Price Quote
    hi-build elastomeric waterproofing membrane, Industrial Paint, Diamond Shiel

    Weather Tuff Pvt. Ltd.

    Navrangpura, Ahmedabad
    14 yrs

GENERAL LINK

Top Cities (India)

Ahmedabad Localities

top