Industrial Wires Dealers in Vatva, Ahmedabad (27 products available)

Voltage Rating :The product is fit for voltage up to HOO VWorking Temperature :Under normal conditions, working temperature rangesfrom U"C to 70"C.Product Application :House Wires, Motor Cables, Plug-pin Cords, Panel Board Wiring,Hand Grinders Sc Cutter Cords, Automobile Wires etc.

Our R&D Department develops our industrial Mining Cables as per the latest industry trends and they fulfill the necessities of oil platforms, electrical submersible pumps and armored cables for the oil industry.

Construction : 1. Single or multistrand conductor made up of silver or nickel plated copper or copper alloy. 2. Spiral wrapped and fused ptfe insulation.

Elevator traveling cable is a vital link between the elevator car and the controller. All power and signal information is transmitted through the traveling cable even when the elevator car is continually in motion. Rubicon PVC Elevator traveling cable is a specialized multi-conductor cable which is suitable for variety of application where there is continues movements. We also manufacture a wide range of travelling cables as per customer specification for various Industries in Flat traveling cables and Round cables.

• Material: PVC
• Color: Black
• Voltage: 750V
• Cable Type: PVC Flat
• Core: 4,8,12,16,18 and 24 Core

• oltage Rating (Volts A.C.R.M.S) MIL – W-16878: TYPE JSS-51034
• BSG 210: 250 volts ET
• WE 1 TD: A
• 600 volts E: WE 2 TD
• B: 1000 volts EE
• WE 3 TD: C

Equipment or hook-up wires are small insulated wires which are used extensively in all types of electrical apparatus. Originally developed for use in aircraft, PTFE equipment wires, due to their performance and reliability are now widely used throughout the industry, where environmental condition preclude the use of ordinary PVC insulated wires. The small size of PTFE insulated equipment wire coupled with high voltage rating saves valuable weight and space in miniaturization and the high temperature limits of PTFE enables soldered connections to be made without damaging adjacent wires.   We manufacturer PTFE insulated silver plated copper wire as per American Military Specification W-16878. Our PTFE wires are as per JSS specifications 51034. These PTE insulated hook-up wires are manufactured in different sizes and different voltages. We manufacture these wires according to American Wire gauge system. Normal size of wires varies from AWG 32 to AWG 12 in single strand as well as multistrand. Insulation thickness of these wire depend upon voltage ratings. Generally three different voltage codes for each type of voltage ratings. We can also supply the material for higher voltage for specific requirements. Chart sowing diameter of base conductor and diameter and diameter of insulated wires having different voltage rating are given SPECIFICATION PTFE INSULATED SPECIAL EQUIPMENT WIRES Please refer to table for commonly available sizes. Within the normal range, larger number of strands are available to improve flexibility and flex-life; 19 strands up to AWG 30, 37 strands up to AWG 20 and 60 strands for AWG 9, 10, 11, 12 and 13. In the two larger sizes AWG 6 and 8, compact 61 strands true concentric constructions (compared to Rope lay 19 x 7) are about 15% lower in OD, weight and cost, although slightly stiffer. We offer finer sizes, having thin-wall PTFE insulation, highly flexible (with flex-life) constructions using Silver Plated High Strength Copper Alloy (SPHSCA). Sizes as small as AWG 37/7/45 (0.43 mm). Even such fine sizes are 100% tested. For Wire-Wrap wire, advantages of PTFE insulation are now available in single strand size up to AWG 36 (OD 0.43 mm), and multi-strand 3607 or 3707 with OD 0.38 mm. SPECIAL FEATURES — QUALITY ASSURANCE 100% Physical and Electrical testing (see below for test voltages ) A minimum of 3 layers of PTFE tape, wrapped and sintered, provides balanced bi-axially oriented, concentrically placed insulation (for more details about advantages of TWS method, click here) Minimum shrinkage/deformation and no `run-away’ problem at soldering-iron temperatures Surface as good as extruded wire without the disadvantages of extruded PTFE insulation in fine-gauge thin-wall types Certified minimum BREAK DOWN VOLTAGE (on samples) to ensure higher, uniform and predictable performance Controlled tigher tolerance on weight, PTFE density and conductor resistance Test voltages for the three common working voltages are: Type Working Voltage AC RMS Dielectric Test Voltage for 1 minute Spark Test Voltage for for 1 second ET 250 1500 2500 E 600 2000 3400 EE 1000 3000 5000   CAUTION Thin-wall insulation is not recommended for higher soldering iron temperatures and for gauges larger than AWG 20 Stripping of Tape-Wrapped-Sintered (TWS) PTFE insulation is generally difficult on automatic high-speed machines, more so, for thin-wall finer sizes ADVANTAGES OF PTFE INSULATION PHYSICAL/CHEMICAL Inert to practically all chemicals even at elevated temperatures Excellent Resistance to Ultra-Violet radiation and stress-cracking Non-contaminating, Non-toxic and bio-compatible Resistant to fungus and mould growth HIGH TEMPERATURE Excellent thermal stability — suitable for use from -200°C to 260°C Fire (flame) proof Soldering iron resistant and suitable for high density wiring ELECTRICAL Suitable for very wide frequency range (DC to above 10,000 MHz) over wide temperature range Lowest dielectric constant (2.1) Lowest dissipation factor (below 0.0003) Highest volume and surface resistivities (in Teraohms) Corona Resistance is fair (CR PTFE is available for severe corona conditions) MECHANICAL Smaller size, lighter weight and much higher reliability Cold-flow and cut-through resistance — fair (good mechanical strength) Excellent flex-life APPLICATIONS OF PTFE INSULATED WIRES & CABLES Electronic Test Equipment Communication Equipment (mobile and manpack wireless sets) Equipment for Aircraft, Radar, Navigation, Electro-mechanical applications, Satellites, Research Equipment for Aerospace, Navy & Meteorology Control Equipment for Atomic Energy, Satellite Launching, Ground Control, Reactors and Process Control, Telephone Exchange, Lifts Computers, Flight simulators High performance motors, transformers and rectifiers Infra-red sensing equipment Thermo-couple and compensating cables Air-field lighting equipment High temperature lighting fittings (sodium lamps etc.) Refrigeration equipment Load cells and pressure transducers Electro-medical/Neuro-surgical equipment High temperature control valves Furnace and oven wiring PTFE INSULATED SPECIAL EQUIPMENT WIRES Please refer to table for commonly available sizes. Within the normal range, larger number of strands are available to improve flexibility and flex-life; 19 strands up to AWG 30, 37 strands up to AWG 20 and 60 strands for AWG 9, 10, 11, 12 and 13. In the two larger sizes AWG 6 and 8, compact 61 strands true concentric constructions (compared to Rope lay 19 x 7) are about 15% lower in OD, weight and cost, although slightly stiffer. We offer finer sizes, having thin-wall PTFE insulation, highly flexible (with flex-life) constructions using Silver Plated High Strength Copper Alloy (SPHSCA). Sizes as small as AWG 37/7/45 (0.43 mm). Even such fine sizes are 100% tested. For Wire-Wrap wire, advantages of PTFE insulation are now available in single strand size up to AWG 36 (OD 0.43 mm), and multi-strand 3607 or 3707 with OD 0.38 mm. SPECIAL FEATURES — QUALITY ASSURANCE 100% Physical and Electrical testing (see below for test voltages ) A minimum of 3 layers of PTFE tape, wrapped and sintered, provides balanced bi-axially oriented, concentrically placed insulation (for more details about advantages of TWS method, click here) Minimum shrinkage/deformation and no `run-away’ problem at soldering-iron temperatures Surface as good as extruded wire without the disadvantages of extruded PTFE insulation in fine-gauge thin-wall types Certified minimum BREAK DOWN VOLTAGE (on samples) to ensure higher, uniform and predictable performance Controlled tigher tolerance on weight, PTFE density and conductor resistance Test voltages for the three common working voltages are: CAUTION Thin-wall insulation is not recommended for higher soldering iron temperatures and for gauges larger than AWG 20 Stripping of Tape-Wrapped-Sintered (TWS) PTFE insulation is generally difficult on automatic high-speed machines, more so, for thin-wall finer sizes  

The primary wire are PTFF insulated meeting requirements of JSS 51034 MIL-W-16878BS3G210NEMA HP3. The cable possess all the unique electrical and mechanical properties of PTFE and are available in size from single wire screened or and jacketed up to cable with a maximum of 66 pairs twisted and or screened and or jacked as per required.

• Type: PTFE Insulated Wire
• Application: High Temperature & AMPS
• Conductor Material: Silver Copper, Bare Copper, Tin Copper, Nickel Copper, Pure Nickel, Pure SS, SS plus Copper
• Insulation Material: PTFE
• Conductor Type: Silver Copper, Bare Copper, Tin Copper, Nickel Copper, Pure Nickel, Pure SS, SS plus Copper
• Brand Name: RADIANT
• Place of Origin: INDIA

Product details: powervoltage upto 1000 v length maximum 2000 mtrs brand radiant india driven by a vision to achieve significant growth in this industry, we are providing a premium quality array of ptfe insulated wire. Features: highly durable optimum strength moisture resistance

We manufacture LT XLPE PVC Power Cables which have found wide applications in various industries due to their technical superiority & economic advantages.

We are offering best jumper cables.

• Type: Male/Female
• Product Code: 4426
• size: 20cm (8 In)
• Features: These wires can be connected to any header with a 2.54mm(0.1

• Country of Origin: Made in India
• Insulating Material: SS
• Number Of Core: 5
• Conductor Type: Armoured
• Crossectional Size: 1MM TO 10MM
• Rated Voltage: 230 V

fiberglass flexible cable, Thermocouple, Rtd Cables, extension lead wire

industrial control cable, Panels

load cell cable, Green Label Load Cell, JEWELERY LOADCELL, digital

Aluminium Wires, aluminum submersible flat cables, copper armoured cables