Lathe Machines Dealers in Kathwada, Ahmedabad (64 products available)

The all new tablet coating machine is widely used for coating purposed in pharmaceutical and food industry mainly. The entire structure is robust and sturdy to give it a very consolidated look. The coating pans have been made considering factors such as rotational speed, total air volume and temperature etc. Working principle: Equipped with the coating pan, the tablet coater allows the product inside the conventional coating pan. During the rotation, the coating material is uniformly showered on the shaking products in the tablet coating pan. Hot air is then blasted inside to dry the material coating evenly before it exits from the venting side. Salient Features The coating pan machine adheres to cGMP model. All the contact parts are made of AISI 316 and non-contact parts of AISI 304. Coating pan is made of  10 SWG, SS304 or SS316 or SS316 L material. Equipped with anti-vibrating unit to keep the machine leveled. Provided with mounting arrangement to facilitate change over between coating pan and polishing pan. The general machine structure is made of MS in standard model whilst using SS304 in GMP model. Equipped with compact air blower arrangement. The revolution of the coating pan is varied with AC driven pulley.

Product Introduction Main features: Rough and finish machine Hydro-static guideway, head load capacity High precision, low noise High wear-resistance DRO available as optional

Features : Easy to use, Long service life, Dimensional accuracy

Centre height : 175 mm

Admit between centres : 650 mm

Swing Over Bed : 350 mm

Swing over cross slide : 215 mm

Spindle bore : 41 mm

Spindle speeds No./Range : 8/75 to 1500 rpm

Spindle nose : Threaded M60x3P.

Threads : 0.5 to 6 mm Pitch

Feeds : 4 to 224 TPI Long. 0.015 to 0.86

Motor : per rev. 1.5 kw /2 hp

Item Code : GNM-1

  Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.    Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.  

Driven Type : Electric

Brand Name : Shiv Shakti Machtech

Country of Origin : INDIA

Certification : CE Certified

Weight : 200kg to 300kg

Condition : New

Automatic Grade : Automatic

Warrenty : 1 Year

Type : Flowmatic

Name : Shiv Shakti Machtech

Country of Origin : India

Brand Name : NAGRANI

Material : Cast Iron

Color : Light Green

Voltage : 440V

Driven Type : Electric

Warranty : 1 Year

Automation Grade : Automatic

Usage : Turning, Facing

Machine Weight : 1000-2000 Kg

Bed Length : 4'.25" to 6 feet

Type : All Geared Auto Feed

LED Indicator : No

Phase : Three Phase

Condition : New

Shape : Square

Speciality : Easy To Use, High Efficiency, Precision

Power : 1-3 KW

Cross Slide Travel : 205 mm

Hardness : 400 to 425

Swing Over Bed : 406 mm

Spindle Speed : 8 / 50 -1200 rpm

Bed Width : 270 mm

After-Sales Service Provided : yes

Model Number : 42G

Automatic Grade : Automatic

Power(W) : As Per Specification

Lathe Machine : Capstan Lathe Machine

Max. Swing Diameter : As Per Specification

Packaging Details : Depends on Clients Requirements.

Condition : New

Port : India

CNC or Not : Normal

Certification : An ISO 9001 2008 certified company, CE Certified Company

After-Sales Service Provided : Engineers available to service machinery overseas

Place of Origin : Gujarat, India

Usage : Wood Lathe

Power : 10 kw

Automation Grade : Semi-automatic

Motor : Stepper

Brand Name : Success

Bed Length : 1500mm

Centre Height : 150mm

Faster, precise and low cost production for the everyday copy turning jobs Hand feed machine - ideal for stair parts and furniture components. Copy turning as per profile. Strong base ensures maximum rigidity with precision turning & copying. Transparent guard for total operator safety. Model No. J-924 Standard Accessories :-   Special 1.5HP / 1440 RPM 3 Phase Motor, R/F Switch, Transparent Safety Guard, Tool rest, HSS turning cutter, Face plate, 4 pin centre, Revolving centre, V-belt, toolkit & m/c manual

Power Consumption : 7.5 KW per hour (Approx.)

Maximum Swing Over Bed : Up to 480 mm

Maximum Swing Over Solid : Up to 260 mm

Maximum Machining Length Chuck : Up to 390 mm

Spindle Taper Hole : Up to 61 mm

Maximum Bar Diameter with Manual Chuck : Up to 58 mm

Production Capacity : As Per Model

After-Sales Service Provided : Engineers available to service machinery overseas

Certification : An ISO 9001 2008 certified company

Place of Origin : Gujarat, India

CNC or Not : CNC

Power(W) : As Per Model

Dimension(L*W*H) : As Per Model

Model Number : BCB-125 & BCB-100

Packaging Details : Depends on Customer's Requirements.

Supply Ability : N/A

Turnkey Project execution is the flagship business of our group and we have successfully executed many plants and proud to have customers from all around the world benefited from our turnkey solutions. As the name suggest, turnkey project execution involves end to end responsibility for any project, from concept to commissioning of the plant. It is a one stop solution for the customer as they can find all their need from us to set-up their plant and run it successfully without any headache. We carefully study requirement of our customer and then our expert team of professionals put their best effort to make sure successful execution of the entire process. We take complete responsibility from designing to commissioning to successful running of the plant at our customers place. We help our customers to convert their dream in to reality. Our scope of service includes: Understanding requirement of customer and suggest them optimum solution Feasibility study of the plant and Preparation of Project report Detailed engineering and designing of the plant Manufacturing and sourcing of various equipment, parts, utility and other items as per the Final design of the plant Inspection of equipment and all the items at various stage of manufacturing and also do final inspection for quality and proper export worthy packing before shipment Documentation, logistics and shipment to assure timely delivery at lowest possible shipment cost Project site study, analysis and selection of land considering required infrastructure Preparing optimum layout of the plant considering various factors inclusive of available resources, raw material and finished good storage, utility, weather condition, future expansion plan etc. Structure, architecture and interior designing of the project site Complete integration of the project and co-ordinate with various agencies to ensure timely completion of the project Installation of the plant and machineries and take the trial production Commissioning of the plant and put it in to commercial production Training of the local staff for the successful running and maintenance of the plant Supply of Men Power ( expats ) on short term and long term contract Energy conservation, Waste management and pollution control Supply of Packing Material and Raw Material and help planning inventory control Proving Management Consultancy, marketing consultancy and IT consultancy Design of website and other Marketing Material Provide after sales services Plan for expansion and diversification Any other project related service required by customer (Actual scope depends upon the type of project to be implemented and services required by customer from us) We supply turnkey projects for wide range of industries ranging from large projects like power plant, steel plant, cement plant, refinery, paper plant, flour mill, sugar plant etc. to medium and small scale plant for food, beverages, pharmaceutical, chemical and other industries. Some of the major projects cater by us are: Metal and metal production plant Cement and other construction material production plant Power Generation Refinery Plastic and Rubber Processing plant Paper and paper production plant Sugar mill & Flour mill Dairy plant Farming and Agro processing plant Food and Beverages production plant Chemicals and chemical production plant Pharmaceutical plant Engineering items manufacturing plant Printing plants Recycle and waste management plant

This equipment is an advanced machine suitable for various applications in power plants, steel rolling mills, workshops, paper mills and tool rooms. It is designed to produce enhanced functionality with high operational output and optimum performance.

Voltage : 415-440 V

Brand Name : Pacemaker Solutions

Model Name/Number : PMF 250

Automation Type : Automatic

Power Source : Electric

Frequency : 50-60 Hz

Positioning Accuracy : 0.01 mm

Spindle Motor Power : 75 kW

Weight : 1700 kg

Application : Bottle Filling

Automation Grade : Automatic

Filling Material : Liquid

Body Material : SS 304

Casting Type : Disc Aluminum Casting

Gear Box Motor : 1 HP

Length of bed:4 12ft,Hist of Center:6 12". Management is committed for assurance of quality and as a result. "MAHAVIR" Brand Wood Working machines have been Quality, tested and whole heartily approved by more than thousands of customer all over INDIA and Abroad.

HAK37 Series direct drive motor NC turret power to rotate with direct drive motor, it index and position with precise three piece face gear coupling, clampingunclamping tool-holder disk with hydraulic force, It features high stiffness, instant reaction, high accuracy of clamping, smooth running from low speed tohigh speed, smart bi-directional indexing and positioning in the shortest path, multi tool stations, build-in cooling. It is the best choice for high-grade NC lathe.

This is a specialized tool used to produce cylindrical rolls in rolling mills. It is a tough and reliable machining companion for finishing and other applications in power plants, steel rolling mills and heavy industries.

Direction : Clockwise / Anti clock wise as per requirement

RPM of Disk : Through ACVFD

Electric Specifications : 0.5 HP/220 V/50 Hz

Height of Table : 860 ± 50 mm

Lathe Machine manufactured by us is used to shape all kinds of metal objects and other materials. We supply Lathe Machine which is manufactured keeping in mind the industry standards. Each Lathe Machine meets several applications in different engineering purposes. We also offer customization facility for our Lathe Machines. Highlights : Designed using latest technologyDurableEfficient performanceReasonably priced

White : blue

We are offering lathe machines we are one of the most prominent companies which are broadly engaged in the manufacture and supply of various excellent quality industrial equipment in the market. Our product range also includes one of the most efficient and reliable lathe machines. These lathe machines are made up of very tough and tensile raw materials and hence are very strong and robust. These lathe machines are widely used in several manufacturing industries for the purpose of cutting, shaping, and milling, facing and champing of the metal equipment. features: • robust construction • supreme material quality • corrosion resistant • reliable functioning • extremely durable • hassle free functioning extra heavy duty long lathe machines we have continually directed our efforts in manufacturing extra heavy duty long lathe machine. We make machines from 5 feet to 30 feet with required modification as per application requirements. These precisely designed facing lathe machines are capable of functioning of long consecutive hours. Each and every part of this machine is fabricated paying utmost attention to minutest details. These lathe machines require minimum maintenance and work for long duration. industrial lathe machines our organization offers lathe machine an extensive range of to our clients. These machines are offered in a variety of models that vary with respect to their technical specifications like height of center, length of bed, width of bed, type of bed and lead screw diameter. We provide these machines as per the different requirements of the clients in order to attain their absolute satisfaction. We also design extra attachments with the lathe machines as per various industrial application requirements. length of bed-5 ft to 32 ft.

Power characteristics : 440 Volts , 3 Phase (4 Wire System ) , 50 Cycles/ Sec.

Turn Table Scrambler All exposed parts of S.S or Aluminum to avoid any rusting. Reduction gear to ensure jerk free noiseless performance and allows absolute cleanliness even inside.

Sailent features * all exposed parts of s.s or aluminum to avoid any rusting. Reduction gear to ensure jerk free noiseless performance and allows absolute cleanliness even inside. * power characteristics : 440 volts , 3 phase (4 wire system ) , 50 cycles sec.

used vertical turret lathe machine, used boring machines

Techno Sales is one of the fastest growing Heavy Duty Lathe Machines supplier in India.

We are engaged in offering a wide range of heavy duty all geared lathe machines, which are known for their superior quality, high performance and durability. Meeting the diverse needs of various industries, these lathe machines are well fabricated with precision materials that lead to better quality of these machines. We offer these machines at the most reasonable prices.

Driven Type : Electric

Color : Black, Blue, Gray, Brown, Red, Pink

Voltage Rating : 110V, 220V, 380V, 440V

Condition : New, Used

Warranty : 1year, 2years, 5years

Certification : CE Certified

Operating Type : Automatic, Semi Automatic

Features : Best Quality,Long Service Life,Optimum Performance,Hard Body Structure,Fine Finished

Size : 7' to 30' foot

Technical Specifications Sr.No. Discription Model-AHDLM-1 Model-AHDLM-1 Model-AHDLM-1 Model-AHDLM-1 Model-AHDLM-1 1 Size length of Bed 1675(5’-6”) 2135(7’-0”) 2745(9’-0”) 3048(10’-0”) 3660(12’-0”) 2 Width Of Bed 324 324 324 324 324 3 Height of Centre 254 254 254 254 254 4 Swing Over Bed 455 455 455 455 455 5 Swing Over Cross slide 255 255 255 255 255 6 Swing in Gap 725 725 725 725 725 7 Admit Beween Centre 555 535 990 1600 2500 8 Spindle Bore 54 54 54 54 54 9 Aprox Weight 1200KG 1300KG 1400KG 1600KG 1800KG 10 Tail stock taper MT-4 MT-4 MT-4 MT-4 MT-4 11 Tail Stock Ram Travel 175 175 175 175 175 12 Lead Screw Dia. 38 38 38 38 38 13 Lead Screw Thread 4TPI 4TPI 4TPI 4TPI 4TPI 14 No. Of Spidle Speed 8/30 TO 495 RPM 15 Range of Thread 1 To 6MM/ 2 To 24 TPI 16 Electric Motor Speed 2HP/1440RPM 2HP/1440RPM/75MM Motor Pully 3Hp/1440 RPM 3HP/1440RPM Standard Accessories: 1.Chuck Plate 2.Face Plate 3.Chaingear Set(inch & MM) 4.Sleady Rest 5.Tool Post Key 6. 2 Nos. Dedcenter 7. 1 No.Sleeve and Motor Pully