McDrill Prahlad Nagar, Ahmedabad, Gujarat

This is a welding alternator plus hydraulic pump, pneumatic transmission PTO gearbox mainly used for support vehicle. Can be fitted with 5- 50 Gpm hydraulic pumps.

Material : Cast Iron

Usage : Vehicle

Capacity : 5- 50 Gpm

Mounting Type : Foot

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Number Of Flower : Pto Gearbox

Country of Origin : India

This PTO gearbox, mounted on truck of all models. Can be fitted with 4 hydraulic pumps from 5- 50 Gpm capacity. Ratio and flange can be customised.

Material : Cast Iron

Driven Type : Hydraulic

Usage : Trucks

Capacity : 5- 50 Gpm

Mounting Type : Foot

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Number Of Flower : Pto Gearbox

Country of Origin : India

This PTO gearbox, mounted on all tractor models. Can fitted with 4 hydraulic pumps from 5- 50 Gpm capacity. Ratio and flange can be customised.

Material : Cast Iron

Driven Type : Hydraulic

Usage : Tractors

Capacity : 5- 50 Gpm

Mounting Type : Foot

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Country of Origin : India

This is a direct drive PTO gearbox, mounted direct to the engine along with the flywheel for all models. Can be fitted with 4 hydraulic pumps from 5- 65 Gpm capacity. Ratio and flange can be customised.

Material : Cast Iron

Driven Type : Hydraulic

Usage : Industrial

Capacity : 5- 65 Gpm

Mounting Type : Foot

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Number Of Flower : Pto Gearbox

Country of Origin : India

This is used for smaller rigs, can be drilled for both hard/ soft formation. Manufactured using high grade steels and heavy spindle and capable to drill up to 300 mtrs. Gearbox can be customised to fit any motor. Ratio can be customised.  

Application : Industrial Use

Number Of Flower : Single Motor Rotary Head

Country of Origin : India

Material : CI

Material : Steel

Surface Finishing : Coated

Usage : Industrial

Size : 10mm, 12mm

Specialities : Titanium Coated, Sharp Edge, Rust Proof, Reaming Shell

Thickness : 5-10mm

Country of Origin : India

We manufacture RC Hammers in different sizes ranging from 4.5, 5, 5.5 inch.

Material : Various Type Of Steel

Application : Industrial

Feature : Durable, Polished Bell Face, Rust Proof, Slip-resistant Handle

Number Of Flower : RC Hammer

Country of Origin : India

Material : Cast Iron

Pressure : 100-500Bar

Pressure Type : High Pressure

Automation Grade : Fully Automatic

Application : Industrial Use

Number Of Flower : Mud Pump

Country of Origin : India

McD Trolley 200 is design after market survey from our clients. For this it required only 10' feet (3mtr) drill pipe. By using McD Trolley 200 you can drill up to max. 650 feet (200mtr) in 4" (100mm) to 8" (200mm) drilling diameter. This product is driven by separate deck engine. So, we can improve its capacity by changes engine capacity. McD Trolley 200 is mounted on various supports.✔ Trolley or trailer mounted✔ Mini truck mounted✔ Crawler mounted✔ It is easy to operate✔ Easy to maintain✔ Low maintenance✔ High efficiency

Driven Type : Hydraulic

Condition : New & Refurbished

Application : Water Well Drilling & Pilling

Number Of Flower : Water Well Drilling Rigs

Country of Origin : India

McD 200 TR is tractor mounted drilling rig. By using McD 200 TR you can drill up to max. 200 feet (60mtr) in 4" (100mm) to 8" (200mm) drilling diameter. For mud area we required centrifugal pump as water mud pump. Centrifugal pump is available in different capacity. We can design it on our client required drilling depth and diameter details. For hard rock required air compressor. It is also available in different models on capacity base. We can design it on our client required drilling depth and diameter details For this it required 10? feet (3 mtr) drill pipe. This product model series is required other vehicle for air compressor carrying. McD 200 TR drilling rig drives by tractor engine through Power tack off gear box.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

Brand Name : McDrill

Country of Origin : India

McD 600 DR is Direct Rotary drilling rig which is used only in Mud and sand area for 6" to 24" diameter up to 1900 feet ( 600 mtr ).✔ It is easy to operate.✔ Low maintenance due to quality mechanical technology.✔ Easy to Maintain.

Brand Name : McDrill

Driven Type : Mechanical

Packaging Type : Customized

Condition : New & Refurbished

Power Type : Powertech

Automatic Grade : Manual

Application : Water Well Drilling & Pilling

Feature : Easy To Operate

Number Of Flower : Rotary Drilling Rig

Diameter : 6" - 24"

Country of Origin : India

Drilling depth : up to 2800 FEET

Product Name : McD DR

Hole Diameter : 155mm - 660mm

McD 600 AUTO is specially required in that area where water level is very down means more than 400 mtr. Ethiopia, Somaliland is one of these types of countries. Now this product is very demanded from Ethiopian borehole contractor. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model has only one option and that is two trucks mounted drilling rig. One for drilling rig unit deck engine drives hydraulic operation and second truck only for high air compressor with diesel tank. By using McD 600 you can drill up to max. 2000 feet (600mtr) in 4? (100mm) to 10? (250mm) drilling diameter.✔ Drilling rig unit, air-compressor, drill pipe and hammer bit must be on single truck. So, no need to extra truck for carrying other material.✔ Automatic Road Changer .✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

McD 750 is specially required in that area where water level is very down means more than 600 mtr. Some time we got this requirement for 700mtr drilling depths. So, for those client we design this model. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model has only one option and that is two trucks mounted drilling rig. One for drilling rig unit deck engine drives hydraulic operation and second truck only for high air compressor with diesel tank. By using McD 750 you can drill up to max. 2500 feet (750mtr) in 4? (100mm) to 10? (250mm) drilling diameter. In mud drilling by using mud pump you can drill up to Max. 1000 feet (300 mtr) in 22?(550mm) drilling diameter.✔ Drilling rig unit, air-compressor, drill pipe and hammer bit must be on single truck. So, no need to extra truck for carrying other material.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

McD 600 is specially required in that area where water level is very down means more than 400 mtr. Ethiopia, Somaliland is one of these types of countries. Now this product is very demanded from Ethiopian borehole contractor. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model has only one option and that is two trucks mounted drilling rig. One for drilling rig unit deck engine drives hydraulic operation and second truck only for high air compressor with diesel tank. By using McD 600 you can drill up to max. 2000 feet (600mtr) in 4? (100mm) to 10? (250mm) drilling diameter.✔ Drilling rig unit, air-compressor, drill pipe and hammer bit must be on single truck. So, no need to extra truck for carrying other material.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

 McD 450 is very hot in water well sector drilling industries. Specially in African countries. Most of African countries they have water level near around 500mtr. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model have two options are available one is single truck mounted with truck engine drive hydraulic operation and second is two truck mounted deck engine drive hydraulic operation. By using McD 450 you can drill up to max. 1400 feet (450mtr) in 4? (100mm) to 10? (250mm) drilling diameter. ✔ If drilling rig unit and air-compressor will be on single truck. Then you required other truck for carrying drill pipe, hammer, bit, and other material.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

McD 300 is very hot in water well sector drilling industries. Specially in African countries. Most of African countries they have water level near around 300mtr. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model have two options are available one is single truck mounted with truck engine drive hydraulic operation and second is two truck mounted deck engine drive hydraulic operation. By using McD 300 you can drill up to max. 1000 feet (300mtr) in 4? (100mm) to 10? (250mm) drilling diameter.✔ If drilling rig unit and air-compressor will be on single truck. Then you required other truck for carrying drill pipe, hammer, bit, and other material.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

McD 250 is very hot in mining sector drilling industries. Because it is total easy to maintain. For this it required only 10? feet (3mtr) drill pipe or 15 feet (4.5mtr) drill pipe. Both options are available in this product. By using McD 250 you can drill up to max. 800 feet (250mtr) in 4? (100mm) to 8? (200mm) drilling diameter.✔ Drilling rig unit, air-compressor, drill pipe and hammer bit must be on single truck. So, no need to extra truck for carrying other material.✔ It is easy to operate.✔ Easy to maintain.✔ Low maintenance.✔ High efficiency.

This is a heavy series pneumatic transmission PTO gearbox, mounted on truck of all models. Can be fitted with 4 hydraulic pumps from 5- 65 Gpm capacity. Ratio and flange can be customised.

Material : Cast Iron

Number Of Flower : Pto Gearbox

Material : Cast Iron

Driven Type : Hydraulic

Usage : Tractors

Capacity : 5- 50 Gpm

Mounting Type : Foot

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Number Of Flower : Pto Gearbox

This is top performing horizontal type double motor gearbox for both hard/ soft formation capable to drill up to 700 mtrs. It comes with dust collector and mud ring, to work on both DTH and MUD. Gear Ratio and motor mount can be customised.

Application : Industrial Use

Number Of Flower : Dual Speed Motor

Country of Origin : India

Material : Various Type of Steel

Application : Drilling, Mining

Size : Customised

Number Of Flower : Dth Hammers

Country of Origin : India

Number Of Flower : Dth Button Bits

Country of Origin : India

Number Of Flower : Straight Shank

Application : Industrial Drilling

Material : Stainless Steel, Mild Steel

Shape : Round

Application : Construction

Length : 2000-3000mm, 1000-2000mm

Feature : Perfect Shape, Highly Durable, High Strength, Fine Finishing

Number Of Flower : Drill Pipe

Country of Origin : India

Material : Carbide Tipped, Stainless Steel

Application : Industrial Use

Size : 7 7/8 To 13 7/8

Number Of Flower : Drag Bits

Thickness : 3-6 Mm

Country of Origin : India