Medical Supplies Dealers in Narol, Ahmedabad

Features:The tubing and chamber made of virgin grade medically treated non-toxic, non irritant PVC material. The flow regulator and piercing spike are made from medical friendly ABS compound to offer superior performance. The protective cap is manufactured from medical grade LDPE to offer due protection of piercing spike and better penetration of EO for sterilization. Air filter made so that all air entering the rigid container passes through it and that the flow of fluid is not significantly reduced. The set provided with a fluid filter with visibly be observed. The air inlet device (both tube airway and built in) provided with a filter design ingress of micro oxygen into the container into which the device is to be inserted. Specifications:The tubing is 1500mm in length and has an internal diameter of 2.7mm Drip chamber and drip tube maintain a distance of 40mm between the end of the drip tube and the outlet of the chamber, the wall of the drip chamber not closer than 5mm to the end of the drip tube, thus it offer 20 drops of solution at 20oC and at a flow rate 50 ± drops/min. delivered 1 ± 0.1ml (1 ± 0.1g) The flow regulator allows smoothly adjusting the flow of the infusion solution between Zero and the maximum. Hypodermic needle of 21G and length 38mm provided superior performance having sharp and smooth vein puncture. Application: Long and short term medical or surgical infusion therapy with choice of vented or non-vented and with or with “Y” sharp connector sets or use with PVC, Glass or Semi rigid container. Availablility:For infusion therapy of paediatric and Geriatric use, we have micro drip set and measured volume set (with floating valve measuring 110ml and 150ml) Option for gravity flow vented and non vented with and without luer lock set available with us.

We are offering iv sets. Features: the tubing and chamber made of virgin grade medically treated non-toxic, non irritant pvc material. The flow regulator and piercing spike are made from medical friendly abs compound to offer superior performance. The protective cap is manufactured from medical grade ldpe to offer due protection of piercing spike and better penetration of eo for sterilization. Air filter made so that all air entering the rigid container passes through it and that the flow of fluid is not significantly reduced. The set provided with a fluid filter with visibly be observed. The air inlet device (both tube airway and built in) provided with a filter design ingress of micro oxygen into the container into which the device is to be inserted. Specifications: the tubing is 1500mm in length and has an internal diameter of 2.7mm drip chamber and drip tube maintain a distance of 40mm between the end of the drip tube and the outlet of the chamber, the wall of the drip chamber not closer than 5mm to the end of the drip tube, thus it offer 20 drops of solution at 20oc and at a flow rate 50 ± dropsmin. Delivered 1 ± 0.1ml (1 ± 0.1g) the flow regulator allows smoothly adjusting the flow of the infusion solution between zero and the maximum. Hypodermic needle of 21g and length 38mm provided superior performance having sharp and smooth vein puncture. Application: long and short term medical or surgical infusion therapy with choice of vented or non-vented and with or with “y” sharp connector sets or use with pvc, glass or semi rigid container. Availablility: for infusion therapy of paediatric and geriatric use, we have micro drip set and measured volume set (with floating valve measuring 110ml and 150ml) option for gravity flow vented and non vented with and without luer lock set available with us. Packing: aseptically packing in hmpoly pouches with choice of single and double pack pouches.

As the name suggests, this infusion set is ideally suited for animals. It is available both in vented (for bottles and bags) and non-vented forms. Some features of our Veterinary Infusion set are:- Soft, clear and flexible tubing Sterile, Non-Toxic and Pyrogen Free. Sterile Pack - ETO (Ethylene Oxide) Sterilization ISO 8536-4 compliant spike ISO 5941 & ISO 5942 compliant end-connection. Options available for Latex Free also.

APPLICATION INDUSTRIES Water Treatment Industries Chemical Industries Petrochemical Industries Refrigeration Industries All Process Industries PERFORMANCE Vessel is most suitable for stirring, mixing, and processing the liquids at a pressure and temperature. Reaction Vessel is equipment in which the chemical reaction is to be carried out either under pressure / temperature / cooling or at atmospheric conditions KRISHNA PRESSURE VESSELS skilled work force to manufacture quality equipments in different material of construction like carbon steel, stainless steel, duplex steel & super duplex steel, cupronickel, Monel, hastelloy, titanium & many others. The range of pressure vessels manufactured is as follows. BODY is made of MS/SS a high-grade plate as per design. Vessels are jacketed/limpet coil type with a flat or dish-end ended. Manhole and necessary connections are provided for the measurement of process parameters. Vessel is tailor made equipment so the design of body and stirrer is to be made on the basis chemical process and requirement. MS vessel may be lined by a Rubber / FRP / Wooden / Lead / Glass.

We offer blood transfusion set. Individual components of the b.a. Set manufactured in - house to assure maximum quality and reliability. sharp spike for better penetration of glass plastic bottles. blood filter as per iso standards. superior quality latex tubing flash bulb for better self - sealing. specially designed roller clamp for better flow control. top quality needles. available with or without air-vent. sterile, non - toxic and pyrogen free.

Hem o lok clip

We are a prominent Supplier and Exporter of IV Set with Y Site and 0.2 Micron Filter from Ahmedabad, Gujarat. Our IV Set with Y Site and 0.2 Micron Filter can be used in various daily medical operations; both home or hospital based. It is an efficient performer and possesses a good functional life. Our IV Set with Y Site and 0.2 Micron Filter is high on demand in various countries in Western Asia, Latin America, Africa and many more. Customers can place bulk orders that would be delivered within stipulated time. Details : Vented Spike 20 drops-ml with Guard Drip Chamber 70 mm Fluid Filter-15 micron Flow Regulator Dial Flow Regulator Latex Free 0.2 Micron Filter Rotating Luer Lock Male Adaptor with Cap 3.0 mm x 4.1 mm PVC Tubing-Length 60+50+30+15 cm EO Sterile Paper Poly Pack

Benzoyl Peroxide, Mekp Catalyst, Agro Product, Fibre Glass Produc

Ideally suited for Secondary Medications. Available in both vented (for bottles and bags) and non-vented (for plastic bottles) sharp spike for better penetration. ISO 8536-4 compliant spike ISO 594/1 & ISO 594/2 compliant end-connection. Soft clear flexible tubing. Sterile, Non-Toxic and Pyrogen Free. Sterilized by E.O. Gas.

A high performing range of eto gas sterilizer is offered to our clients from our end. Ethylene oxide gas sterilization is a method of sterilizing new medical devices and heat sensitive devices. A wide range of delicate devices is sterilized at low temperature. This method is the integral part of a modern cssd. We provide the most effective eto sterilization system that is safe to use and eco-friendly, moreover, these are also customized as per the specifications mentioned by our clients and are fabricated using best quality material and components.     Owing to our highly-advanced infrastructural base and vast knowledge, we are engaged in offering a commendable array of ETO (Ethylene Oxide) Gas Sterilizer. It is primarily used to sterilize Surgical, medical and pharmaceutical products & maize starch products, food and spices products. Offered product is fabricated by our adroit professionals who are adapted with enriched industry-experience in this domain. Apart from this, our customers can avail the entire range at industry leading prices. Ethylene Oxide (ETO) sterilizer is mainly used to sterilize medical & Surgical and pharmaceutical products & Food and Spices Products, Maize Starch Products.that cannot support conventional high temperature steam sterilization - such as devices that in company electronic components, plastic packaging or plastic containers. Normally the ETO used for gas sterilization is mixed with diluents such as carbon dioxide in different proportions from 10 % ETO to 90 % ETO. The commonly used gas concentration in the sterilizers is 450 to 1000 mg/lit of chamber volume (measured as pure ETO). Features : Single or double door With Sliding or Hinged door options to suit client specific requirements Dimple Water Jacketed for better Uniformity of the heat Distribution. (Technology for fast Sterilization cycle and low cost operating) Gas evaporation system is provided to ensure gaseous sterilant even at low temperature Gas circulation system in place to achieve uniform concentration of ETO gas. This is imperative for chamber volumes above cubic meter Operation: Manually Semi Auto control System Fully Auto Control System Sterilization Process Temperature and Relative Humidity Recorders Fully Automatic PLC with PC Base Control with all Parameter recording and cycle graph Printing facility Contamination Seal to prevent cross-flow of air between the clean and un-clean area Technique:Most ETO sterilization lines involve three different stages. These can be separated into three different cells depending on the size or amount of devices to treat: Pre Conditioning Sterilization Degassing Pre Conditioning Stage:First, products need to go through a pre conditioning phase to make micro organisms grow. The batch load goes through a dwell time under a controlled environment of: Temperature Humidity Sterilization Stage:Then the load goes through a long and complex sterilization cycle. Requirements of such a system are: Accurate temperature control Availability of the control system Accurate pressure and vacuum control Easy displays of process phases Dedicated customer recipes Auto batching release through tolerance tests Reporting Security interlocks between actuators Alarming Shut down strategies

Empowered with the team of expert knowledgeable professionals involved in manufacturing the Bio Medical Steam Sterilizer. Our range of products includes Bio Medical Steam Sterilizer such as Bmw High Speed Sterilizers, Bmw HPHW Sterilizers, BMW Rapid Sterilizers and BMW Sterilizers. The offered high speed sterilizers are designed by our experts by utilizing high grade basic materials in line with international quality norms. Our offered Bio-Medical steam sterilizers assists in sterilizing bio-medical waste comprising liquids, solids, sharps and laboratory work fritter away which may have high possibility to be infectious or unsafe and come under bio waste class. The waste is heated indirectly by providing steam in the jacked instead of main chamber. Our Bio-Medical Steam Sterilizer manufacture is totally Micro-processor controlled and highly automatic.