Onyx Enterprise S G Highway, Ahmedabad, Gujarat

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate.The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 ºC. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.

FEATURES: Converts airspeed into a 4 – 20mA or a 0 – 10 VDC signal Linear output signal Made with corrosion resistant material Fully electronic registration of airflow speed AC or DC voltage supply Compensates for changes of air temperature Telescopic sensor facilitates installation Temperature output signal 0 – 10 VDC Fuse protected APPLICATION: The ESF-35-2 airflow transducer can be used in a wide range of applications such as: - Measurements of airflow speed via PLC/outstation/EMS - Regulation of airflow speed - Monitoring of airflow speed

Indications  The Tru-Pull Lite incorporates a patented technology of independent pull straps, which apply a “true” and consistent pull on the patella during flexion and extension, thereby realigning the patella. The Tru-Pull Lite is DonJoy’s most comfortable, low profile and shortest patellofemoral brace, yet strong enough to relieve pain. Recommended for acute mild to moderate anterior knee pain, support for patella instability, lateral subluxation and maltracking. Features and Benefits Patented dual durometer (silicon) buttress system provides consistent corrective force on the patella • Bifurcated strap dynamically pulls the patella into proper alignment Semi flexible removable nylon hinges included 21 cm (8.3”) long support giving maximum power to pull patella into alignment Fabric is hypoallergenic, breathable, and lightweigh

The New Reaction Knee Brace is an active, responsive, webbed approach to general anterior knee pain, and a distinct alternative to basic knee sleeves. Indications Chondromalacia Patella Osgood-Schlatter Disease Patella OA, mild bicompartmental OA Quadriceps and Patella Tendonitis/Tendinosis Features and Benefits The elastomeric web design helps reduce pain by dispersing energy across the knee The flexible membranes absorb shock and shift peak loads away from the painful area The contoured fit, compression and stretch of the membranes provide increased proprioception The web design dynamically stabilises the patella on all sides Dual axis hinges for additional support • Fitted under-sleeve for comfort Open framework provides intimate fit around the patella and captures the anatomic features of the knee The mesh backing creates a comfortable fit and a breathable solution The adjustable straps help the brace remain in place during daily or sports activities

Indications Early to mild unicompartimental osteoarthritis of the knee & patella OA Reaction Web™ is the ideal “first-time” choice: it allows patients to get accustomed to wearing a brace, making it easier to transition into a more rigid OA brace when the time comes OA Reaction Web™ is also a good option for patients wishing to use it as a lighter alternative to their usual rigid brace Patient profile Mild to moderate activity levels All age groups Overweight patients

Features: Multiple modalities in a single unit including combination ultrasound and electrotherapy A completely modular setup allows you to choose among the components that best fit your practice A comprehensive reference library providing information on therapy, treatments and pathologies Over 200 pre-loaded clinical protocols, fully supported by a complete library of research references Extensive anatomical library that illustrates an array of pathologies Treat and monitor multiple patients at the same time Full-colour, 10.4” (26.4 cm) LCD touch screen displays in sharp, vivid detail A high speed USB port allows software updates and simple and efficient transfer of patient information Tabletop or optional cart configuration

Features: 1 and 3 MHz frequencies Pulsed and continuous therapy operation (10%, 20%, 50% and 100%) Variable duty cycle outputs of 16 Hz, 48 Hz, or 100 Hz Clinical indications provide the most appropriate application and parameter set for the patient’s condition 10 user-defined memory positions Lightweight design, along with battery-powered option and custom designed mobile carrying bag, make transport easy Innovative design allows for cart, table top, wall or mobile use Ergonomically designed sound heads in variety of sizes (1 cm², 2 cm², 5 cm², and 10 cm²)

Features: Class 3B Low Level Laser Therapy Independent control over all parameters Continuous and pulsed operation available Fully variable pulsed frequencies Display of energy in choice of joules or joules/ cm² Helpful menu of Clinical Indications specific to the laser applicator 15 user-defined memory slots on board Built in acupuncture point finder 17 different applicators available, including LED, laser diodes, and clusters Innovative design allows for cart, table top, wall or mobile use

Features: 1 and 3 MHz ultrasound frequencies Pulsed and continuous ultrasound therapy operation (10%, 20%, 50% & 100%) Variable duty cycle outputs of 16 Hz, 48 Hz, or 100 Hz for ultrasound Multiple waveforms on board: (2 Pole IFC, 4 Pole IFC, Galvanic, High Voltage Pulsed Current (HVPC), Microcurrent, Russian, Träbert, Monophasic Triangular, Monophasic Rectangular, Diadynamic, VMS and TENS) Clinical Indications on board, providing the most appropriate parameter set for a variety of conditions 15 user-defined memory positions Lightweight design, along with battery- powered option and custom designed mobile carrying bag, make transport easy Innovative design allows for cart, table top, wall or mobile use Ergonomically designed sound heads available in a variety of sizes (1 cm², 2 cm², 5 cm², and 10 cm²)

Features: More than 25 clinical waveforms 2 independent electrotherapy channels High resolution color display of all screens Over 200 Clinical Protocols and Over 100 User-defined protocol slots Over 10 Quick-link Indications for quick parameter retrieva l Impressive clinical library which includes full color graphic anatomical and pathological libraries on vibrant LCD screen Constant current/constant voltage modes Surface EMG and EMG plus stim (optional) Documentation of treatment outcomes with Patient Data 1 & 3 Mhz ultrasound frequencies Pulsed & Continuous Modes (10%, 20%, 50% & 100%) Variable duty cycles (16 Hz, 48 Hz & 100 Hz) Ergonomically designed sound heads in 1 cm², 2 cm², 5 cm² & 10 cm² sizes

Hydrocollator, These durable stainless steel water tanks house the Hydrocollator Moist Heat HotPacs. The units are thermostatically controlled to ensure the ideal therapeutic temperature for HotPacs. Hydrocollator remains the benchmark heating unit against which all other units are judged. Full fiberglass insulation to prevent heat loss • Dependable, rugged stainless steel design Simple to fill with water. No plumbing required • Constant temperature of HotPacs is maintained Mobile units are equipped with 8 cm swivel, rubber casters for friction free movement about the clinic

Modern appearance Large, blue backlit, LCD screen Eco button for energy saving RS485 interface (Modbus protocol) Button lockout function avoids unauthorized operation Non-volatile memory (EEPROM) retains user setting during power loss Low temperature protection Standard dimension 86x86mm box for installation Temperature sensors are provided with failure alarm function to facilitate maintenance

Lightweight, low profile and easy to wear, the cutaway-angle design of the inner thigh adds comfort. Ideal for the active patient, leisure sports, or activities of daily living. FullForce incorporates DonJoy’s patented 4-Points-of-Leverage design and the FourcePoint hinge design technology, making it suitable for ACL instabilities. Indications Moderate to severe ACL, MCL & LCL instabilities. Features and Benefits Clinically proven 4-Points-of-Leverage design & FourcePoint hinge technology to maximise ACL protection Aircraft aluminium grade frame to reduce the brace weight and to improve comfort Mouldable frame for custom fitting Low profile design to minimise visual brace appearance Internally mounted swiveling strap tabs to help accommodate  leg movement Swooping thigh cuff for inner thigh clearance & bilateral use Carbon fibre aspect

PI (proportional plus integral) control action provides accurate, stable and comfortable temperature control. Compatible with series 70 direct-coupled damper / valve actuator like ML7161,ML7174, ML7420 / ML7421series ML7425,ML7984 series, N20010, S10010, M7410E series, CN7505, CN7510 / CN72 seriesCN7220 & CN7234 also VC79 series etc. Backlit LCD to display both setting and measured value. Adjustable Zero Energy Band, On/Off Differential, Proportional Band and Temperature Offset. Analog output can be forced manually to be convenient for installation & commissioning. Optional 2 to 10Vdc or 4 to 20mA direct acting and reverse acting analog output. Selectable internal and external temperature sensor.  Wide temperature control range (-20 to 110°C by using external temperature sensor) is suitable for extreme temperature control such as steam and ice water. Watch Dog Timer: to resume the controller from hanging condition. Brownout effect to avoid malfunctioning and care on power ON and power OFF. Pluggable terminal block allows pre-wiring outside of the controller. Compact size and slim design provide elegant and attractive modern style appearance.

Application H7080B series duct mounting humidity and temperature transducers are designed for environmental monitoring and control applications in industrial, commercial and general building. These sensors can be used for discharge, outside or return air control. Features Temperature Output: NTC or Pt1000 4~20mA/ 0~10VDC or resistance output for temperature 4~20mA/ 0~10VDC output for humidity Duct mounted Excellent linearity Good long term Stability High reliability Wide sensing range Easy installation

Indications  The Drytex Hinged Knee, designed for mild to moderate medial lateral control, is made of Drytex, a neoprene alternative fabric that allows for improved airflow. This fabric provides compression and support, yet allows for breathability. Features and Benefits Polycentric hinges Durable, lightweight fabric With popliteal cut-out for extra comfort in flexion

Applications Differential pressure switch e.g. for monitoring filter, fan, fire damper or air flow status of air handling systems. Benefits Switching point easily adjustable with scale in Pascal Direction of PG 11 conduit entry rotatable in steps of120° Only one screw needed for housing cover Pressure medium Air, non-inflammable and non-aggressive gases