Pneumatic Valve Dealers in Shahpur, Ahmedabad (20 products available)

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

Body Type : Enclosed or Sealed

Body Material : Ductile iron (CRN available) or aluminum

Available size : 1″ (25mm) to 60″ (1500mm)

Standard Face-to-Face : ASME B-16.10, DIN 3202, ISO 5732

Temperature : -50deg F to 250deg F

Actuator options : Double or Single acting pneumatic

In-Line Tube Change : Yes

Wear Sensor : Yes, option available

Max. Working : Pressure Up to 300psi (20bar) (consult for higher pressures)

Pneumatic Pinch Valve is the cost effective solution to flow control problems. the secret is only rubber sleeve valves only wetted parts. actuation of the valve, the pinching action is accomplished by pneumatic cylinder. the sleeve’s flexibility allows the valve to close drop around entrapped solid. it is available with no & nc condition. we also provide the positionar. materials of construction :- cast iron or aluminum body fabricated steel, open-frame designsleeves available in pure gum rubber, neoprene, hypalon, chlorobutyl, buna-n, epdm and vitonansi class 125/150. applications :- sludge controlraw sewage controlflow equalizationcyclone dischargerecycled paperpulp stockthickener underflowwet lime scrubberscatalyst feed systemsindustrial treatment

Features : Solid one piece cast body in corrosion resistant stainless steel, 150 PSI working pressure, Bonnet less outside screw and yoke, non –rising hand wheel rising stem

Spindle : SS 304

Gate : SS 304

Gland : Cast Iron / Cast Steel / SS 304 / SS 316

Main Body : Cast Iron / Cast Steel / SS 304 / SS 316

Bracket : M.S.Strip

Available in sizes : 2” to 24”diameter

Pneumatic Operated Pinch Valve

Material : Stainless Steel

Brand Name : Uflow rotex

Media : AIR, WATER

Country of Origin : Made in India

Valve Size : 1/2 TO 2 Inches

Product Type : Y type valve

Packaging Details : SINGLE PIECE BOX

Size : 2-3 Inch

Material : Stainless Steel

Brand Name : Worth

Connection : Two Way

Air Connection : Barbed Fitting for 1.4 Inch O D polytubing

Packaging Type : Carton Box 

Media : Air, Water, Gas

Double Acting / Single Acting Pneumatic Rotary Actuator, Rack And Pinion Type : Centric Disc Butterfly Valve With A Single Piece Rubber Lined Body

We offer iso 5211 pneumatic rotary actuator operated centric disc butterfly valve with a single piece rubber lined body (integrally moulded or replaceable muffler type).

Size : 1/2

Material : ss

Pressure : 10kg

Size :  

15 NB to 80 NB : End Connection

  : Screwed and Flange End.

Body & Bonnet :  

ANSI304 / ANSI 316 : Gland

  : Silicon combination (self compration type)

Seating :  

 Mascon make Pneumatic cylinder actuator operated 'Y' Type 2/2 way Globe Valve & same construction is also available with 'T' Type 3/2  way globe valve    Selling Points:  1) Completed valve is made in ANSI304 Invest cast including Actuator and Bonnet.  2) Compact design preferred by OEM when there is lack of space in the equipment.  3) Flow capacity is marginally less than ball valve but largest than conventional globe valve. Fluid: Air, Water, Steam and Chemical  Temperature:- 15 to 180 deg. C.(Temperature above 180 deg. C.  refer  Mascon) pressure: Vacuum to 10 bar.

1. SOLENOID VALVES:- 3/2, 5/2, 5/3, - ( 1/4", 3/8", 1/2", 1") Single & Double Acting 2 PORT Direct Acting Normally Open / Closed, High Pressure , Diaphragm Operated, Air Operated  3 PORT Direct Acting, Pilot Operated, 5 Port Single / Double Acting, High Orifice.  Medium:- Air, Inert Gases, Water Operating Pressure:- 2 - 10 Bar, High Pressure: (4-70 bar), (0-150 bar) ,(5-400 bar)  Operating Temperature:- 5 to 60 Deg C 

AMTECH TWO piece design Ball valves can be operated by the actuator, on off type, with limit switch / with solenoid valves as per customer requirements. Valves are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

Brand Name : PROLINE VALVES MAKE

Material : ALL TYPES OF MATERIAL

Application : Waster treatment plants, water works, power plants, steel plants, cement plants, agriculture industr

Place of Origin : AHMEDABAD

Pressure : PN 05, PN 10, PN 16, 150 #, 300# 600#

Structure : Hand wheel type, Pneumatic actuator type

Media : WATER, AIR, OIL, STEAM, VACUUM, VARIOUS CHEMICAL, SLURRY, CHILLER WATER AND MANY MORE

Port Size : 15 MM TO 500 MM

Temperature Of Media : UPTO 1000 DEGREE

heavy design : long functional life

LESS PRICES : quick delivery

Butterfly Valve With Pneumatic Actuator, PPCH Male Threaded Elbow

Pneumatic Valve, Solenoid, pu pipe, y angle valve, acuator butterfly valve

Pneumatic Valves, Plastic Frisbees, polyurethane coiled hoses

Pneumatic Valves, Boiler Spare Parts, Brass Fittings, Burner Spare Parts

pneumatic operated valve, SMC PRESSURE SWITCH, Ball Valve

Solenoid Valves, pneumatic air cylinders, Industrial Rubber Hoses

Pneumatic Valves, Slotted Angles, Stainless Steel Needle Valve, Cable Tray

Solenoid Valves, Industrial Valves, Butterfly Valves, Pinch Valve