Precision Bearings Pvt Ltd Changodar, Ahmedabad, Gujarat

Accommodating combined load and radial load In spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.

They need less axial space than double Range row angular contact bearings. The contact angle is 35 degree & two parts l/R are easy to assemble & provide a high load carrying capacity. ZNL Offerings: 511XX, 512XX, 513XX DLJT, DMJT, (Inch & mm) Also available in Steel and Brass cage.

Suitable for High stiffness application Carrying combined load Accommodating pure axial load or pure radial load Impact load carrying capacity Types of Taper Roller bearings: Single row tapper roller bearings (also with seal on one side) Paired single row tapper roller bearings Double row tapper roller bearings Four row tapper roller bearings   ZNL Offerings : Series Available 302XX 303XX 313XX 320XX 322XX 323XX 329XX 330XX 331XX 332XX INCH SERIES H, HL, HM, T4CB, JM, JL, LM, HH Interchangeable components (Cup or Cone) can be manufactured for all Inch series bearings

Suitable for In spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing. ZNL Offerings: 292XX, 293XX, 294XX Available in steel and brass cages  

we deals in supplying of wide range of spherical roller bearings. suitable for accommodating combined load and radial load also carrying bi-directional axial load take misalignments up to 2.5˚ high load carrying capacity znl offerings: 202xx, 203xx, 213xx, 222xx, 223xx, 230xx, 231xx, 232xx 240xx and 241xx available in cylindrical and taper bore available in steel and brass cage   .

Suitable for: Low or medium speed application Carry radial load, but not suitable for axial loads. Accommodating misalignments ZNL Offerings: 1200,1300,1400, 2200, 2300 in C2, C3, C4 clearances

These bearings are combination of radial ball bearing, seal and housing of high-grade cast iron which conies in various shapes. The OD of the bearing and the internal surface of housing are spherical, because of this the unit is self-aligning. The radial load carrying capacity of this bearing is higher than that of the corresponding self-aligning ball bearing used for standard plummer blocks. Any misalignment of axis that arises from poor workmanship on the shaft or error in fitting will be properly adjusted. Range (Inch & mm) UC - UCP - UCF - UCT - UCFC - UCFL 204 to 220 UC - UCP - UCF - UCT 304 to 328  

Constraint Space between housing and shaft Carry high radial load Low and Medium speed,Shaft Locating Washers-AS, WS,Housing Locating Washers-GS 811.

we are leading supplier of huge range of needle roller bearing. suitable for constraint space between housing and shaft carry high radial load low and medium speed drawn cup needle roller bearing caged type - hk sce sch, bk bce bch, hk.rs, hk..2rs, bk..rs needle roller bearings with ribs-nk,nks, rna49, rna48, nki, nkis, na49, na48, rna69, na69, rna49..rs, rna49..2rs, na49..rs, na49..2rs without ribs-rnao, nao inner ring-ir, lr full complement -rnav, nav aligning-rpna, pna axial bearing axial needle roller and cage assembly-axk, axw axial cylindrical roller and cage assembly-k811, k812, k893, k874, k894 radial needle and cage assmblies k/ks, kk/kks, kzk, kbk, knl yoke type track roller without axil guidance-rsto, rsto..x, sto, sto..x, rna22..2rs, rna22..2rsx, na22..2rs, na22..2rsx with axil guidance-natr, natv, nutr, nutr..x stud type track roller with axial guidance-kr, kre, kr..pp, kre..pp, krv, krve, krv..pp, krve..pp, nukr, nukre axial bearing washers shaft locating washers-as, ws housing locating washers-gs 811 bearing washers-ls center washers-zs .

Suitable for   Heavy radial load carrying capacity Uni-directional and bi-directional axial load carrying capacity   ZNL Offerings Full compliment cylindrical roller bearing with snap ring grooves SL 182XXX SL 183XXX SL 192XXX Sealed Double row full compliment cylindrical roller bearing SL 0450XX

This bearing contains solid outer ring, split inner ring and ball and cage assembly. Two-piece inner rings allow large complement of ball to accommodate. These bearings are not suitable for miss alignment in housing or shaft deflection. Also these bearings are not sealed. ZNL Offerings: QJ2XX, QJ3XX QL, QM, LDJT & MDJT Series

Suitable for: Low, medium and high speed application Low maintenance application Accommodating bi-directional axial load Good running accuracy and low noise ZNL Offerings: Single row deep groove ball bearings: 6800, 6900, 16000, 6000, 6200, 6300, 6400,62000, 62300,63000, 61800, 61900, 6200, 6300 - Also in EMQ [Electric Motor Quality] Double row deep groove ball bearings: 4200, 4300 with Z, 2Z shield and with Rubber seal RS, 2RS snap ring groove and snap ring For radial clearance C2, CN, C3, C4, C5 As per ISO grade P0 ABEC1 And as per ISO Grade P6A BEC3 Cage type riveted of steel and brass steel, machined brass cage, polyimide. Dimension as per ISO standard, DIN standard and ISI standard. RLS, RMS, XLJ Available

Suitable for Carry heavy radial load at high-speed application Compact space Carry axial displacement Non-bearing location installation Types of Cylindrical Roller Bearings: NU Design - Outer ring has two integral flanges, while inner ring had no flange. N Design - Inner ring has two integral flanges while outer ring has no flange. NJ Design - Outer ring has two integral flanges and inner ring has one integral flange. NUP Design - Outer ring has two integral flanges and inner ring had one integral flange & loose flange ring for both side axial locations ZNL Offering: N2XX, NF2XX, NJ2XX, NJ22XX, NU2XX, NU10XX, NUP2XX, NUP22XX,NU22XX N3XX, NF3XX, NJ3XX, NJ23XX, NU3XX, NUP3XX, NUP23XX N4XX, NF4XX, NJ4XX, NU4XX, NU23XX, NUP4XX INCH SERIES: CRL, CRM, CFL, CFM Available in steel, brass, and polyamide cages  

Outer ring has two integral flanges, while inner ring had no flange.Inner ring has two integral flanges while outer ring has no flange.Outer ring has two integral flanges and inner ring has one integral flange.

Clutch Release Bearings, Needle Roller Bearings, King Pin Bearings, DAC-Wheel Bearings and Gear Box Bearings are the main parts of automobile sector.     DAC-Wheel Bearings Range • DAC 25520037 to DAC 5090034 Clutch Bearings Range • T. 63 to T. 811 • T. 1260 to T. 7519 • CB 3557 - 13 to CB 31870-355

Suitable for: High accuracy and high-speed application Accommodating combined load i.e. axial and radial load High load carrying capacity Quiet and low friction ZNL Offerings: Single row angular contact ball bearing: 7000, 7200, 7300, 7400 (Available in Steel, Brass & Polyamide Cages) Double row angular contact ball bearing 3200, 3300, 5200, 5300

We are leading supplier of huge range of Ball Bearing.

We are well known for supplying of wide variety of Tapered Roller Bearing.

A prominent supplier of huge range of Cylindrical Bearings.

We deals in supplying of wide range of Pillow block bearing.

We are well known for supplying of wide variety of Automobile Bearing.