Pressure Regulators Dealers in Ahmedabad

Technical Specification Fluid Material All gases corrosive or non-corrosive or those requiring high purity regulations complete with materials or construction. Max. Rated Inlet Pressure 6000 PSIG Outlet Pressure Range 1-25, 2-50, 10-200, 20-300, 100-600 Flow Capacity 0.06 Inlet Outlet Port Size 1/4", 3/8", 1/2" NPT/BSP   Typical Application : High purity gas handling regulations of corrosive and specially semiconductor manufacturing epitaxial reactors diffusion furnaces research lab.

The Model 461-S and Model 441-S family of regulators are balanced valve, spring type regulators designed for distribution and industrial applications. They are extremely dependable with simple design, sturdy construction, and fast response. Service and adjustment are easy and overall operation is stable and sensitive.   The 461-S, 461-8S, and 461-12S models are ideal for distribution and industrial applications where a single seat regulator is too small and the usual 2" balanced valve regulators are too large. Their large exit areas give them a broad capacity, making them applicable to a wide variety of load handling requirements. But, when large loads are the requirement, the model 441-Sregulators have the larger bodies and valves to deliver the gas. Large, flexible diaphragms combined with accurately calibrated springs enable these large capacity regulators to produce precise pressure control while maintaining a high level of sensitivity and stability. The combination of their fast response, dependability, and accuracy make the 441-S models ideal for monitoring, as well as other applications where speed and accuracy are significant.

"Flow-Tek" FT-LPRV- Gas Back Pressure Regulator is the ideal valve for low-pressure gas regulation. The FT LPRV works in conjugation with the in a low-pressure tank blanketing valve system.LPRV can be used to vent gas from the tank to prevent the blanketing pressure from rising to a level that could damage the tank while maintaining a small, constant flow to keep the blanket fresh. During filling, It opens to allow gas to escape as the vapor space in the tank grows smaller. To size properly, find the rate of fill so that a regulator can be chosen based on it's ability to relieve the required amount of gas while sustaining desired blanketing pressure. The Mark 508 will also work well in any other type of low back-pressure gas application.   APPLICABLE STANDARD   Design Standard : MFG. STANDARD Face to Face : MFG .STANDARD End Connection : Flanged End to suit ANSI / DIN / BS / JIS / IS etc. Testing Standard : API 598 / CONTROL VALVE ANSI-FCI-70-2-2006 STD

We offer Two Stage Pressure Regulator. Technical Specification Fluid Material All gases corrosive or non-corrosive or those requiring high purity regulations complete with materials or construction. Max. Rated Inlet Pressure 6000 PSIG Outlet Pressure Range 1-25, 2-50, 10-200, 20-300, 100-600 Flow Capacity 0.06 Inlet Outlet Port Size 14", 38", 12" NPTBSP

The gas governors are conformity with EN 88 standard (2009/142/CE gas regulation). The governors are suitable to systems' installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems. TECHNICAL FEATURES Compensation diaphragm, operating diaphragm and safety diaphragm: an external breather outlet pipe is not necessary as the incorporated safety diaphragm ensures that, in the event of breakage of the operating diaphragm, no gas leakage (over 30 dm3/h) is possible inside the room (in compliance with par. 3.3.2. EN88 specifications). INSTALLATION Install the governor with the diaphragm positioned horizontally (on horizontal pipes). Be careful to follow always the direction of gas flow indicated by the arrow on the governor.Suitable tools must be used for the governor fitting on the inlet and outlet hubs. Never effect leverage on the sleeve of the upper cover when fitting the governor. For all models with the filter inside, the governor is best fitted at a comfortable height from the ground so as to facilitate the filter cleaning (fit always a suitable gas filter upstream the governor).Make sure that the pipes are clean and aligned so the governor is not under stress. Do not remove the perforated diaphragm breather cap (3) and do not obstruct the hole, otherwise the governor will not work. Install the governor so avoiding contact with plastered walls. Make sure that the governor is suitable to the intended use.  

High Pressure Gas Regulators, LPG Cylinders, LPG Valves, Gas Regulator

We are the leading manufacturers, exporters and supplier of this products.

We are Offering low pressure regulator for controlling gas pressure and gas flow from milibar pressure to milibar pressure.

Gas Pressure Regulators, CCTV Camera, CCTV Digital System, CCTV Syste

Back Pressure Regulator for SWAS, Continuous Emission Monitoring System

Pressure Regulators, Paper Lamination Plant, Boiler Accessorie

Pressure Regulators, Welding Equipment

Pressure Regulators, Miniature Valves, Tank Valves, Alloy Valve