A well known submerged arc welding wire supplier company.
CLASSIFICATION : AWS/SFA-5.18 ER70S-7
CHARACTERISTICS : Copper coated double oxidized solid wire for all position CO2 welding. The special Characteristics are smooth and stable arc low spatter Thin and uniform copper coating ensure good conductivity usedull for high speed feeding
APPLICATION :Suitable for welding structural steels up to UTS 500 N/mm2 and Carbon steel and low alloy steels for single and malti pass with higher travel speeds compared to others filler metals.
SHIELDING GAS : Welding with CO2 gas and Ar+ CO2 gas mixture
A well known submerged arc welding wire supplier company.
CLASSIFICATION : AWS/SFA-5.18 ER70S-7
CHARACTERISTICS : Copper coated double oxidized solid wire for all position CO2 welding. The special Characteristics are smooth and stable arc low spatter Thin and uniform copper coating ensure good conductivity usedull for high speed feeding
APPLICATION :Suitable for welding structural steels up to UTS 500 N/mm2 and Carbon steel and low alloy steels for single and malti pass with higher travel speeds compared to others filler metals.
SHIELDING GAS : Welding with CO2 gas and Ar+ CO2 gas mixture
one of the leading in submerged arc welding fluxe supplier company.
calcium-manganese silicate type agglomerated submerged arc welding flux for high speed welding
classification: - aws: sfa/a 5.17 f7a0-el8, f7a2-em12k
b.i: 1.10
mesh size: 10x60bss (0.25-1.68mm)
density: 1.20 kg/dm3
cheracteristics:- agglomerated, natural basicity, calcium-manganese silicate type high speed welding flux with excellent slag detachability and smooth weld bead.it is welding with single and multi-wire procedure with dc or ac current,
due to high alloys the flux is welding up to 20mm in joining applications.
typical application: - it is suitable for general construction, welding on structural steel, pressure vessels and water pipes, feasible for welding on a little rusty or oily plates also,
it is suited for twin and multi wire welding and well suited in high speed welding especially for spiral pipe mills and also high speed beam welding,
drying requirement: - redrying recommended at 350°c for 2 hour before use..
one of the leading in submerged arc welding fluxe supplier company.
calcium-manganese silicate type agglomerated submerged arc welding flux for high speed welding
classification: - aws: sfa/a 5.17 f7a0-el8, f7a2-em12k
b.i: 1.10
mesh size: 10x60bss (0.25-1.68mm)
density: 1.20 kg/dm3
cheracteristics:- agglomerated, natural basicity, calcium-manganese silicate type high speed welding flux with excellent slag detachability and smooth weld bead.it is welding with single and multi-wire procedure with dc or ac current,
due to high alloys the flux is welding up to 20mm in joining applications.
typical application: - it is suitable for general construction, welding on structural steel, pressure vessels and water pipes, feasible for welding on a little rusty or oily plates also,
it is suited for twin and multi wire welding and well suited in high speed welding especially for spiral pipe mills and also high speed beam welding,
drying requirement: - redrying recommended at 350°c for 2 hour before use..
stainless steel welding wire (tig / mig / saw)a basic coated 3.50% ni alloyed electrode for welding low alloy steels.
classification : aws/sfa 5.5 e 8016-c2
characteristics :
a basic coated hydrogen controlled electrode depositing weld metal which contain 3.0-3.5 % nickel. The electrodes have smooth and stable arc characteristic with easy slag removal system. The other features are excellent striking and good bead appearance. The weld metal is of radiographic quality. This type of electrodes to be used for low temperature service.
application :
specially designed for welding fine grained steels and nickel steels for service temperatures down to minus 80⁰c. Other application include pressure vessels & storage tanks etc.
re-dry condition : re-dry the electrode at 300°c for 1 hrs before use.
stainless steel welding wire (tig / mig / saw)a basic coated 3.50% ni alloyed electrode for welding low alloy steels.
classification : aws/sfa 5.5 e 8016-c2
characteristics :
a basic coated hydrogen controlled electrode depositing weld metal which contain 3.0-3.5 % nickel. The electrodes have smooth and stable arc characteristic with easy slag removal system. The other features are excellent striking and good bead appearance. The weld metal is of radiographic quality. This type of electrodes to be used for low temperature service.
application :
specially designed for welding fine grained steels and nickel steels for service temperatures down to minus 80⁰c. Other application include pressure vessels & storage tanks etc.
re-dry condition : re-dry the electrode at 300°c for 1 hrs before use.
ELECTRODES FOR WELDING MILD, MEDIUM & HIGH TENSILE STEELSLow heat input electrode for General Repairs
Basis OF Alloys : C, Si, Mn
Application & Descriptions : General repairs with workability and smooth weld bead of X-ray quality with appropriate penetration. The weld metal is tough, ductile and resistant to high stresses, smooth and stable arc, very less and slag easily removable.
Light and medium gauge construction & sheet metal work, storage tanks, steel furniture, wagons, ships, boilers and others constructions work in General.
RE-DRY CONDITION : Re-Dry not recommended
ELECTRODES FOR WELDING MILD, MEDIUM & HIGH TENSILE STEELSLow heat input electrode for General Repairs
Basis OF Alloys : C, Si, Mn
Application & Descriptions : General repairs with workability and smooth weld bead of X-ray quality with appropriate penetration. The weld metal is tough, ductile and resistant to high stresses, smooth and stable arc, very less and slag easily removable.
Light and medium gauge construction & sheet metal work, storage tanks, steel furniture, wagons, ships, boilers and others constructions work in General.
RE-DRY CONDITION : Re-Dry not recommended
AAJMIG 5356 (AWS/SFA-5.10 ER5356)
CLASSIFICATION: AWS/SFA-5.10 ER5356, ISO 18273 S AI5356
CLASSIFICATION : AWS/SFA-5.10 ER5356, ISO 18273 S AI5356 IS-814: ER 4222 X,DIN 1913 E 4322R3
CHARACTERISTICS : ER 5356 is a general-purpose type aluminum alloys which is typically chosen for its relatively high shear strength. In addition, it also offers excellent corrosion resistance when exposed to salt water. ER 5356 should be considered for welding 5000 series aluminum base metals
APPLICATION :Suitable for welding selected grade of wrought Al/Mg alloys including 5083, 5056 and 5456
AAJMIG 5356 (AWS/SFA-5.10 ER5356)
CLASSIFICATION: AWS/SFA-5.10 ER5356, ISO 18273 S AI5356
CLASSIFICATION : AWS/SFA-5.10 ER5356, ISO 18273 S AI5356 IS-814: ER 4222 X,DIN 1913 E 4322R3
CHARACTERISTICS : ER 5356 is a general-purpose type aluminum alloys which is typically chosen for its relatively high shear strength. In addition, it also offers excellent corrosion resistance when exposed to salt water. ER 5356 should be considered for welding 5000 series aluminum base metals
APPLICATION :Suitable for welding selected grade of wrought Al/Mg alloys including 5083, 5056 and 5456
we are offering best flux cored arc welding wire supplier company.
classification : aws/sfa-5.11: enicu 7 characteristics : a medium heavy coated, low hydrogen basic coated, monel electrode. Electrode has extensive corrosion resistance properties due to minimum iron content in the weld deposit. The joints are radiographically soundapplication :1) suitable to weld monel metals to itself.2) monel to carbon steel or stainless steel.3) welding on clad side or monel clad steel.4) seawater corrosion resistance applications, petrochemical, daily beverage industries, chemical industries etc.
re-dry condition : re-dry the electrode at 250°c for 1 hour before use.
we are offering best flux cored arc welding wire supplier company.
classification : aws/sfa-5.11: enicu 7 characteristics : a medium heavy coated, low hydrogen basic coated, monel electrode. Electrode has extensive corrosion resistance properties due to minimum iron content in the weld deposit. The joints are radiographically soundapplication :1) suitable to weld monel metals to itself.2) monel to carbon steel or stainless steel.3) welding on clad side or monel clad steel.4) seawater corrosion resistance applications, petrochemical, daily beverage industries, chemical industries etc.
re-dry condition : re-dry the electrode at 250°c for 1 hour before use.
copper coated welding wire (tig / mig / saw)
hydrogen controlled, basic coated electrode for non-machinable weld on cast iron
classification : aws/sfa-5.15: est characteristics : a hydrogen controlled, medium heavy coated electrode, laying non- machinable weld deposits on cast iron. The electrode needs the components to be pre-heated in case they are heavy and complicated sections. Gives strong and rigid weld joints.application :1) suitable to weld mild steel to cast iron parts.2) repair works on cast iron where machining is not of importance and primary consideration
re-dry condition : re-dry the electrode at 150°c for 1 hour.
welding precaution : 1. Clean the weld area free of any surface contaminations.2. For heavy and complicated sections, preheat to minimum temperature of 400° is recommended.
copper coated welding wire (tig / mig / saw)
hydrogen controlled, basic coated electrode for non-machinable weld on cast iron
classification : aws/sfa-5.15: est characteristics : a hydrogen controlled, medium heavy coated electrode, laying non- machinable weld deposits on cast iron. The electrode needs the components to be pre-heated in case they are heavy and complicated sections. Gives strong and rigid weld joints.application :1) suitable to weld mild steel to cast iron parts.2) repair works on cast iron where machining is not of importance and primary consideration
re-dry condition : re-dry the electrode at 150°c for 1 hour.
welding precaution : 1. Clean the weld area free of any surface contaminations.2. For heavy and complicated sections, preheat to minimum temperature of 400° is recommended.
classification :aws/sfa-5.10 er4043, iso 18273, s ai4043
classification : aws/sfa-5.10 er4043, iso 18273, s ai4043 is-814: er 4222 x,din 1913 e 4322r3
characteristics : er 4043 is a general-purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloys contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. Er 4043 can be used to weld various grades of aluminum.
application :for welding 6xxx alloys and most casting alloys automotive components such as frame and drive shafts bicycle frames
classification :aws/sfa-5.10 er4043, iso 18273, s ai4043
classification : aws/sfa-5.10 er4043, iso 18273, s ai4043 is-814: er 4222 x,din 1913 e 4322r3
characteristics : er 4043 is a general-purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloys contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. Er 4043 can be used to weld various grades of aluminum.
application :for welding 6xxx alloys and most casting alloys automotive components such as frame and drive shafts bicycle frames
Reviews & Ratings
Write a Review
Post Free Ad