6000 LPH RO Plant
950,000 Per Piece
Type : Ro Plant
Material : Stainless Steel
Application : Water Purifies
Weight : 1000-2000kg
Voltage : 110V
Automatic Grade : Semi Automatic
Driven Type : Electric
Warranty : 1year
Capacity (Litres Per Hour) : 6000
Plant Application : Industrial RO Plant
Body Material : Stainless Steel
Hot Water Generator
Fuels : Oil / Gas Fired
Capacity : 50,000 Kcal/Hr. to 6 Lacs Kcal/Hr.,
Water Filter
Type : Water Filter
Certification : CE Certified
Color : Creamy, Off White, White
Driven Type : Vacuum Toilets
Voltage : 110V, 220V, 380V
Weight : 1-2kg, 3-4kg ,5-6kg ,7-8kg, 9-10kg
Power : water filter
Electric, Solar : 10-15kw, 15-20kw ,20-25kw ,5-10kw
Usage : Water Recycling
Dialysis RO Plant
150,000 Per Piece
1 Piece(s) (MOQ)
Weight : 500-1000kg
Automatic Grade : Automatic, Manual, Semi Automatic
Warranty : 1year
Capacity : From 500 LPH to as per Customer Requirement
Description Raw Water Storage Tank (By Client) Raw Water Pump Sand Filter Unit Carbon filter Unit Antiscalent Dosing System Micron Cartridge Filter High Pressure Pump R.O. System U .V SYSTEM ( ALPHA MAKE) RO Treated Water Storage Tank (By Client)
R.O. Mineral Drinking Water Plant
We Have Entier Range Of Products Which Meets With Your Requirement In Health And Hygine. The Drinking Water / RO / Mineral Water Plants With All The Neccessary Equipments And Range Of Essential Spares Are Available. We Also Do Customisation Of The Plant As Per Your Requirement.
MS Industrial RO Plant
175,000 Per Set
Brand Name : Ally
Number Of Filtration Passes : 5
Max Water Recovery Rate : 60-65 %
Material of Construction : MS
Capacity (litres per hour) : 1000 to 2000
Number of Membranes in RO : 2
Operation Mode : Automatic
uv uf commercial ro water purifier plant
7,000 - 30,000 Per piece
Country of Origin : India
Type : Ro Water Purifier
Application : Water Purifying
Color : Blue, White
Condition : New
Automatic Grade : Automatic, Fully Automatic, Semi Automatic
Warranty : 2years
RO+UV+UF water purification plants are advanced water filtration systems that use three different technologies to purify water: Reverse Osmosis (RO), Ultraviolet (UV) and Ultrafiltration (UF). RO technology removes dissolved solids, heavy metals, and other contaminants from water by forcing it through a semipermeable membrane. UV technology uses ultraviolet rays to kill bacteria, viruses, and other microorganisms present in the water. UF technology removes suspended solids, such as sediment and other impurities, from the water.
Hot Water Generator
Situated in Gujarat(India), ours is the name reckoned for providing quality products at competitive price. Feel free to approach us, if seeking for top-of-the-line quality Hot Water Generators!
RO Membranes
Placed in Ahmedabad(India), is capable of catering to local as well as domestic markets without any hassle. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.
FRP RO Mineral Water Plants
500,000 - 1,500,000 Per 10000 LPH
Country of Origin : India
Type : New
Brand : Acuapuro Water
FRP RO Plant (एफआरपी आरओ प्लांट) Manufacturers In Ahmedabad Acuapuro Water Equipment India Pvt. Ltd. is offering a high-quality & affordable price “FRP RO Plant Manufacturer” in Ahmedabad, India. We are also manufacturing a wide range of products which include pure Mineral Water Plants, FRP RO Plant for Oil Industries, Industrial RO Plant Machines, Stainless Steel RO Plants &
Industrial R O System
1 Piece(s) (MOQ)
Product Name : na
Color : na
Color : na
· PACKAGED DRINKING WATER · MINERAL WATER BOTTLE · MINERAL WATER JAR · MINERAL WATER POUCH · MINERAL WATER BOWL / CUP
Hot Water Generator
100,000 - 2,500,000 Per Piece
1 Piece (MOQ)
Brand Name : Aadeeah
Material : Steel
Finishing : Raw
Color : Silver, Grey And Multiple
Condition : New
Power : 50kw -2000kw
Power Source : Electric
Application : Industrial Use
Certification : Nil
Length : Costomized
Voltage : 220V, 380V
Packaging Type : Carton Box, Open body
Size (mm) : Costomized
Dimensions (mm) : Costomized
Temperature Capacity : 100-250c
Specialities : Rugged Construction
Type : Hot Water Generators, Hot air geberators.
Thickness : 6to 20'mm
Efficiency : 70to 82
Warranty : 6months
Country of Origin : India
Diameter (mm) : As per Design
Max Temperature : 150 To 250 Degree C
Fuels : Solid fuel
Min Heat Output : 50kw
Max Heat Output : 2500 kw
Weight in Kg : 1000-10000kg
Water Purifier
Driven Type : Electric
Automatic Grade : Semi Automatic
Power : 1-3kw
Hot Water Generator
You can purchase supreme quality Hot Water Generator from us at reasonable prices. Our range of Hot Water Generators can easily operate on different fuels. We offer our esteemed customers with efficient Hot Water Generators that are fabricated using advanced machinery and skilled labor. We are eminent Suppliers and Exporters of Hot Water Generator from Ahmedabad, Gujarat. Our range of Hot Water Generators is highly durable, robust and functions fluently.
Demineralization RO Plant
Backed by a team of proficient quality inspectors, we provide only quality assured products to the customers. Keeping in compliance with the international standards, we ensure that the raw materials used for varied products are 100% certified and quality approved. This helps us in maintaining a set standard of our products.Area of Applications : Cooling water in the Industries. Useful in Boiler feed. Painting. Agricultural Production. Electronics. Packaged Drinking Water. Food and Beverages. DG Set & Power Plants. Textile Industries. Pure water Generation pharmaceutical Industry. Pharmaceuticals Green House
Boiler Feed RO Plant
Widely used in the boiler feed applications, the Boiler Feed RO Plant is used for effectively removing unwanted water impurity and scale producing salt contaminants ions. These Boiler Feed RO Plants are Industrial Plants that are acclaimed for their hassle-free performances. We are among the trustworthy Manufacturers, Exporters and Suppliers of the Boiler Feed RO Plant. Highlights Easy to installSimple to operateLong-lifeHassle-free operations
Ro Plant
Process of industrial ro plant raw water pump:- to generate the pressure for down the line system. pressure sand filter (psf):- the water is first filtered by pressure sand filter unit for removal of suspended matters and turbidity. activated carbon filter(acf):- to remove colour, odour, chlorine, oil & grease from the raw water. micron cartridge filter(mcf):- these are pressure vessels fitted internally with spun or pleated cartridge element which removes micron sized particles. antiscalant dosing system:- to prevent membrane from scaling (hardness). high pressure pump:- a high pressure pump is provided for supplying the feed water to ro system at high pressure of 10 - 12 kgcm2. desalination system by ro membrane element :- a reverse osmosis system rejects 90-95% of total dissolved solids (tds). storage of treated(pure) water:- to store treated (pure) water in tank.
Reverse Osmosis Plant
165,000 Per Number
Material : FRP
Voltage : 220 V
Features : Modular design,Low water-rejection rate,Low operational and maintenance costs
RO Capacity : 100 LPH
Automatic Grade : Semi-Automatic
Plant Application : Industrial RO Plant
Number of Filtration Passes : 5
ro control panel
50,000 Per Piece
1 Piece (MOQ)
Application : RO Plant
Material : MS
Phase : Three Phase
Power : Electric
Reverse Osmosis Plant
85,000 Per Piece
01 Set(s) (MOQ)
Application : Water Purification
Capacity : 500-1000 ltr
Material : FRP
Model Name/Number : STIEE-RO 1
Water Storage Capacity : 2000 L
Purification Capacity : Up to 1000 LPH
RO Capacity : 500-1000 (Liter/hour)
Purification Type : Reverse Osmosis Technology
Type Of Purification Plants : Reverse Osmosis
Automatic Grade : Automatic
Max Pressure : 1.5 MPa
Reverse Osmosis Plants
85,000 Per unit
Material : FRP
Application : Water Purification
RO Capacity : 500-1000 (Liter/hour)
Type Of Purification Plants : Reverse Osmosis
Water Storage Capacity : 2000 L
Reverse Osmosis Plant
The Reverse Osmosis Plant manufactured by us carries out the reverse osmosis process which is done for the removal of practically all inorganic salts by membrane technology. In this process, water is passed through cellulose acetate/poly amide semi permeable membranes at pressure above Osmotic pressure. Due to high pressure the salt and pure water separates through semi periable membranes. The process of demineralization by ion exchange has the limitation when TDS of raw water is above 1500 ppm, or it is not a viable process for brackish water and salty water contains higher dissolved salts. To overcome such difficulty reverse osmosis technique is used removes all the unwanted inorganic salts like calcium, magnesium, sodium, chloride, sulphates, nitrates, silica etc. From the water having high TDS, the process is most economical. It is possible to achieve conductivity below 1 microseimenns/cm2 of treated water and silica below 20 ppb when RO+DM with proper scientific design depending on raw water quality.
Reverse Osmosis Plant
Seven Seas Solutions (SSS) RO units incorporate all of the components and instrumentation required for operation, as well as the versatility to adapt to specific customer requirements. Technical parameters such as cross flowrates and membrane flux are among the most conservative in the industry. When membrane fouling does occur, or there is a need for routine maintenance, you will find SSS's MASTERsupport™ service capabilities to be the most comprehensive in the industry. SSS RO units are also available in the MASTERpak series, a system that incorporates Pretreatment, RO, and EDI all on a single packaged skid.Manucacturing Cappacity - 250 LPH to 500 m3/hr. Any Time Any Where 24 hours, 7 days a week access to effectively manage your water system. Real Time Access to: Purchase spare parts online Review shipping information Review invoice/payment history Request technical information Electronic manuals Remote system monitoring capabilities
Industrial RO system
Industrial RO System is the process, in which water is pressurized through a semi –permeable membrane. As a result of this, as shown in the below depicted schematic diagram, water will pass through the membrane surface while the dissolved and particulate materials are left behind. When the pressure is applied to the concentrated solution, water is forced through the membrane from the concentrated side to the dilute side. This process is known as“ Reverse Osmosis.”Reverse Osmosis (RO) is a process of physical separation of dissolved solids and minerals present in water. This technology uses the principle of osmosis, wherein the mineral concentration of raw water is reduced by applying high pressure through a semi-permeable membrane. RO technology offers maximum flexibility to meet diverse requirements. Our customised software, Landmark helps customers gain the maximum 'RO Advantage', by helping to make the right selection.Landmark considers your inlet water quality and capacity requirements and offers you optimised combination. This choice is dependent on different flux rates, pump models, membrane types and inlet water quality. It gives the right solutions, reduced What is Industrial RO System? The Industrial RO System is composed of two major parts, High Pressure pump and the R.O. membranes. The initial purified water production rate is measured at this pressure.It appears that there are long term benefits to be gained by operating at lower percent water recovery, particularly in reducing maintenance to the systems and minimizing precipitation problems which may arise due to operator error.It is important to realize that the purified water from a Reverse osmosis system is delivered essentially at Atmospheric pressure, usually to a vented storage tank. In general, It cannot be operated by opening and closing valve in the product water line (unless special pressure relief is provided). The reason for this is that the high pressure in the system drives the water across the membrane. And no flow of water would be possible if the pressure on both sides of the membranes were same. If, for some reason, the product water line is closed, while the system is operating, the pressure would build up. Of course, if the purified water side of the system was strong enough, the pressure would end up the same as the pump pressure, but at that point, no water would flow across the membrane. In reality, the P.V.C. piping on the product water side normally would not tolerate such high pressure.The membrane is capable of taking 600 psi of “forward pressure”. i.e. from the direction of the supply water side to the purified water side. However, they are susceptible for it’s tolerance limit for “ Back Pressure.” I,e, from the direction of purified water side to the supply water side.” So, one should take care while operating the system.The Quality of purified water produced by Reverse Osmosis process is roughly a constant percentage of the feed water. For example, if the feed water is entering at 50 ppm , the purified water may be about 1 to 2 ppm. (i.e. 96.00 to 98.00% rejection of dissolved minerals.). For another example, when the feed water is entering at 500 ppm, the purified water would be from 10 to 15 ppm. Usually a Conductivity meter Or TDS meter is used to measure the mineral contents. The Membrane Based Technology The application of Reverse Osmosis to the solution of problems in water treatment requires an understanding of the basic mechanisms involved in the process, the limitations of reverse osmosis and the pre treatment requirements. Reverse osmosis utilizes the unique properties of a “Imported” semi- permeable membrane to allow fluid to pass while restricting the flow of Dissolved Ionic material. With pressure applied to impure water on one side of such membrane materials, pure water will pass through, leaving most of the impurities behind. The rejection of the dissolved ionic material is a function of both Molecular weight and Ionic charge. For example, we can expect a nominal 90 % rejection of Sodium Chloride, which means that the product water passing through the membrane will have a concentration of salt approximately One-tenth that if the feed water. The rejection of calcium carbonate (Hardness) will be nearly 95%. While most metallic salts will be rejected at a rate of 98% to 99%. The rejection of non- ionic or organic material is primarily done by mechanical filtration. Advantages Compact and modular RO blocks Easy installation, operation and servicing Specific selection possible from a wide range High level of plant automation Visual monitoring system (VMS) for ease of trouble-shooting Stainless steel multistage centrifugal pump; inline suction and delivery allows easy maintenance and access Online product water quality monitoring Membrane and pump protection features Minimum pipe length to reduce system resistance Easy servicing with QRC (Quick Release Coupling) Material of construction : PVC/SS Applications Ceramic Chemicals Dairy Fishing Food & Beverages Hospital Hotel Pharmaceutical Pulp & Paper Textile Technical Details : filtering capacity-500-10,000 lph
Reverse Osmosis System
We are offering reverse osmosis system. Landmark considers your inlet water quality and capacity requirements and offers you optimised combination. This choice is dependent on different flux rates, pump models, membrane types and inlet water quality.
Industrial Ro Plant
105,000 Per Piece
Feature : Simple to operate ,Superior functionality ,High filtration capacity.
Application : Chemical industry , Beverage industry
Domestic RO System
5 Stage of RO Water Purifier UF +ALKALINE RO-200G/400G-D01 Features Flush type: Manual Flush With steel shelf Housing: 122-20 Single "O" Ring Housing RO Water Output: 200GPD/400G GPD Fitting Type: JACO Diaphragm Booster Pump with Adaptor 110V/220V, 50/60Hz Faucet: GF01 (As seen in the picture) RO Membrane: Hidrotek or Filmtec Pressure Tank: 11G steel Tank
Hot Water Generator
Hot Water Generator In any abnormal conditions either due to no fuel oil, low water level, high water temp., high stack temp, low pressure switch, shuts off & gives an alarm, indicating fault on control panel, so we can easily rectify the fault.
Reverse Osmosis System
10,000 Per Unit
1 Unit (MOQ)
Brand Name : Accurate
Material : FRP
Capacity : 10 LPH
Usage/Application : Water Purification
RO Capacity : 2000-3000 (Liter/hour)
Power Supplier : 110V -220V
Style for Purifier : Cabinet
Operating Principle : RO
We are supplier of Reverse Osmosis System
stainless steel ro membrane housing
Material : Stainless Steel
Automatic Grade : Automatic
End cover material : ABS
Max working pressure : 250 psi
Surface Treatment : Chrome Coated
Length : Up to 4 feet