Hydraulic Testing Machine Dealers

Features Load Capacities 50kN to 600kN static & dynamic Frame stiffness 1100kN/mm Up to 250 mm stroke servo hydraulic actuators with 1micron resolution Fully Integrated and Self contained. Works out of 1Ǿ 230VAC, NO need of 3 Ǿ No need of external water cooling arrangements Next generation DSP based servo controller with 32 bit data acquisition 24 kHz data acqusition & 24 kHz servo loop control Accuracy ± 0.5% of read out value for load, strain & stroke 0-5 Hz operation (for max amplitude ± 50um) Noiseless operation Power pack rating 4 LPM Applications Tension/Compression/3 point bend Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R) Threshold stress intensity Low-Cycle Fatigue (LCF)s Elastomeric properties Low / High temperature tests (-1500C to 11000C)

UT-02-XXXX Makron Test System is a single foot print assembly with an enclosure housing controller and hydraulic power pack. The Load frame with a T-slot bed and provision to mount actuator on top may be located on the top of enclosure. These systems are available in the range, 25–50 kN and provide the flexibility to perform static and dynamic tests. These systems are easy to install and usually do not require any additional utilities such as cooling. Just plug i to the closest 15A mains socket and the system is ready for use. Standard Features Up to 100Hz cycling frequency                             Flexible operation                            25/50 kN force rating actuators            50 to 100 mm actuator stroke           Adaptable to wide range of fixtures & grips   Energy efficient pumps User friendly MTL software Single foot print assembly Frame stiffness: 600kN/mm Applications Tension/Compression/3-point bend  Fatigue crack propagation  Fracture mechanics             Room temperature tests  Low/High temperature tests  Low/High cycle fatigue (LCF/HCF)  Damping force measurements  Elastomer testing  Tension/compression/3-point bend  Ductile/brittle fracture  Threshold stress intensity

Product Code: EKE EE-60 Conforms to Grade A of BS:1610, Grade 1.0 of IS:1828   Ergonomically designed State of the Art Technology Microprocessor based Digital Indicator Unit 2 Channels, one for digital display of load in KN/KGF and the other for Displacement in mm in bright, shadow-less display Feather-touch push buttons for Tare, Peak Hold –Load, Peak Hold – Displacement and Auto Calibration. Bright Digital Display Resolution 20,000 Counts for load Resolution for Displacement 0.01 mm   Optionals :   Resolution - 50,000 Counts for load and 0.01 mm or 0.001 mm for elongation as per requirement at extra cost PC with Software and Printer Provision of Analogue display RS 232 serial port Printer Port  

When it comes to payment, we offer convenient and practical methods to our clients. We undertake both online and offline payment methods which are hassle free and safe for the clients. Owing to our well-established set-up in Kolkata(India), we are capable of catering to the requirements of clients with utter ease.

Type of Test: Destructive Purpose:Understand behaviour of component under Radial load with constant or variable displacement/ motion in cyclic pattern Prime Mover: Servo Hydraulic Power Pack  Brief Specifications: 15 HP AC Induction Motor and Servo Hydraulic Power pack System with Two Pillar structure with micro controlled system to generate sinusoidal, Trapezoidal and square wave motion.

Hydraulic testing machine is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing strength. It is capable of testing the characters of materials on physical & technology properties. It is simple, easy to operate and widely used in factories, laboratories and high schools for material properties research and quality control. Equipped with the computer & software & printer, it can display, record, process and print the test results, and control test procedures as per the set program and can draw test curves automatically in real time.

    Hydraulic testing machine suitable for stainless stell and carbon steel longitudinally welded tubes   Custom made design to suit requirements of water and gas tubes to Oil country tubes   Emphasis on : Material selection     Manufacturing & process selection     Dimensional & geometrical accuracy   Specially designed sealing arrangement for high pressure testing   PLC controlled Auto & Manual cycles   Quick changing type tooling for quick size change   Testing pressure range from 200 to 600 atmosphere   Heavy and rugged heads fabricated from tested carbon steel   Selection of Power pack and intensifier from most standard and dependable sources   Suitable for tube length ranging form 4 meters to 8 meters. Easy & quick length change through adjustable moving tailstock   Single or multi-head design to suit different production quantum requirements .

Exceptional After-sales Services of this Hydraulic Grip Universal Testing Machine can be experienced once it is purchased from us. Also, spare parts of this Hydraulic Grip Universal Testing Machine can be purchased from us at competitive rates. This Hydraulic Grip Universal Testing Machine complies with the most stringent of standards set by IS, BS, ASTM and DIN. Details : Complete range of material testing system, Destructive testing (DT) & Non Destructive equipment (NDT)Product conforming to IS, BS, DIN and ASTM StandardsEquipment approved by NPL / NML, NABL, LLOYDS, PDIL, NTPC, BHEL, RDSO, DOI and Railways

Testing Capacity : Upto 5000PSI ➣ Optional Accessories :1) Manifold System to test multiple Cylinders.2) All size Adapters / Plugs to suit all types of extinguishers3) Testing Bench Vice4) Testing Case / Cage.

We are leading Hot/Cold Baths For Hydrostatic Pipe Pressure Testing, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   Technical Specifications : → Capacity : 200 To 20,000 litrs → Temperature Range : Ambient to 95 °C. → Accuracy : +/- 0.5 °C. → Temperature controlling system :      Thyristorised power pack. (30% Power Saving). → MOC Inner : SS-304, Outer MS Powder coated. → Door opening : 3 Layers folding type. → Water level controlling : Auto + Safety. → Water circulation : With Heavy duty pump      (German make) → Supply : 440 VAC/50 Hz  

Hydrostatic Pressure Testing Machine are used to find out the resistance internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards.